In this study, machine learning algorithms (MLA) were employed to predict and classify the tensile strength of polymeric films of different compositions as a function of processing conditions. Two film production techniques were investigated, namely compression molding and extrusion-blow molding. Multi-factor experiments were designed with corresponding parameters. A tensile test was conducted on samples and the tensile strength was recorded. Predictive and classification models from nine MLA were developed. Performance analysis demonstrated the superior predictive ability of the support vector machine (SVM) algorithm, in which a coefficient of determination and mean absolute percentage error of 96% and 4%, respectively were obtained for the extrusion-blow molded films. The classification performance of the MLA was also evaluated, with several algorithms exhibiting excellent performance.
Background: Industry 4.0 is a burgeoning research area that has been addressed by many research entities. However, the literature shows that the industrial sector lacks the awareness and knowledge needed to comply with Industry 4.0 implications, particularly in developing countries. Methods: This study evaluates the status of small and medium enterprises (SMEs) in Jordan concerning Industry 4.0. Four criteria are assessed, including Industry 4.0 readiness, maturity, drivers, and barriers. Samples of SME respondents and Industry 4.0 experts are surveyed using an online questionnaire. Results: The results show that SMEs in Jordan are not mature enough nor ready to apply Industry 4.0. For the readiness dimension, SME respondents and experts agreed that the Jordanian SMEs’ status is between having initiatives in the pilot phase or implementing concepts to low degrees, except for autonomous workpiece and smart product aspects, in which Jordanian SMEs are behind due to financial and technological reasons. It was found that none of the Industry 4.0 investigated technologies have reached maturity levels. Customer requirements, cost reduction, competitors’ practice, productivity improvement, and quality improvement are found to be the major influencing drivers for Industry 4.0, while a lack of awareness and knowledge is found to be the crucial barrier hampering Industry 4.0 implementation. Conclusions: Jordan needs country-scale initiatives for the implementation of groundbreaking Industry 4.0 development, incorporating government agencies, industrial parties, and experts, relying on Industry 4.0’s readiness and practice status as a starting point, and considering the influential drivers and barriers to steer the development process.
8 January 2018 in International Journal of Production Research
The design of manual-order-picking warehouses is a combination of interdependent decisions with enormous possible varieties in design components. The strong interrelationship between these components, in addition to the dynamic and interconnected stochastic nature of the problem; necessitate the utilisation of a simultaneous simulation-based approach. This study proposes a concurrent simulation-based design of experiments approach for the design of manual-order-picking warehouses. The proposed approach can investigate all possible warehousing design combinations with their stochastic nature and interactions; hence, widening the search for performance improvement. The examined design components include warehouse throughput, size, layout, operational policies and manpower/carts. Furthermore, the presented approach captures the probabilistic nature of all the key warehouse functions of receiving, unloading, put away, storage, preparation and picking and shipping; and evaluates the performance of the studied designs using the cycle time for a stock keeping unit in the warehouse. Statistical analysis of the simulation results showed several interesting findings; horizontal layout was preferable over all other types of layouts and small size warehouses perform better than other large sizes. The study has also recommended using high throughput for traditional layout-small size warehouses.
5 April 2017 in Journal of Industrial Engineering and Management
Purpose: This paper presents an implementation of the Six Sigma DMAIC approach implementing lean tools and facilities layout techniques to reduce the occurrence of different types of nonconformities in the carpeting process. Such carpeting process can be found in several industries such as construction, aviation, and automotive.Design/methodology/approach: The improvement process was built through a sequential implementation of appropriate interconnected tools at each phase of the DMAIC approach. Utilized tools included: Pareto analysis, control charts, Ishikawa chart, 5-whys, failure mode and effect analysis, process capability ratio, value stream mapping, and strategic layout planning.Findings: The carpeting process capability, quality of the product, customer satisfaction, and cost of poor quality were significantly improved. Explicitly, the sigma level was improved from 2.297 to 2.886 and the defects per million opportunities (DPMO) was reduced from 21615 to 3905.Originality/value: This paper has approved the capability of the Six Sigma DMAIC approach to analyze, investigate, and remove the root causes of the carpeting (preparation-installation) process nonconformities .
An artificial neural network (ANN) extracts knowledge from a training dataset and uses this acquired knowledge to forecast outputs for any new set of inputs. When the input/output relations are complex and highly non-linear, the ANN needs a relatively large training dataset (hundreds of data points) to capture these relations adequately. This paper introduces a novel assisted-ANN modeling approach that enables the development of ANNs using small datasets, while maintaining high prediction accuracy. This approach uses parameters that are obtained using the known input/output relations (partial or full relations). These so called assistance parameters are included as ANN inputs in addition to the traditional direct independent inputs. The proposed assisted approach is applied for predicting the residual strength of panels with multiple site damage (MSD) cracks. Different assistance levels (four levels) and different training dataset sizes (from 75 down to 22 data points) are investigated, and the results are compared to the traditional approach. The results show that the assisted approach helps in achieving high predictions’ accuracy (<3% average error). The relative accuracy improvement is higher (up to 46%) for ANN learning algorithms that give lower prediction accuracy. Also, the relative accuracy improvement becomes more significant (up to 38%) for smaller dataset sizes.