As a key candidate technique for fifth-generation (5G) mobile communication systems, non-orthogonal multiple access (NOMA) has attracted considerable attention in the field of wireless communication. Successive interference cancellation (SIC) is the main NOMA detection method applied at receivers for both uplink and downlink NOMA transmissions. However, SIC is limited by the receiver complex and error propagation problems. Toward this end, we explore a high-performance, high-efficiency tool—deep learning (DL). In this paper, we propose a learning method that automatically analyzes the channel state information (CSI) of the communication system and detects the original transmit sequences. In contrast to existing SIC schemes, which must search for the optimal order of the channel gain and remove the signal with higher power allocation factor while detecting a signal with a lower power allocation factor, the proposed deep learning method can combine the channel estimation process with recovery of the desired signal suffering from channel distortion and multiuser signal superposition. Extensive performance simulations were conducted for the proposed MIMO-NOMA-DL system, and the results were compared with those of the conventional SIC method. According to our simulation results, the deep learning method can successfully address channel impairment and achieve good detection performance. In contrast to implementing well-designed detection algorithms, MIMO-NOMA-DL searches for the optimal solution via a neural network (NN). Consequently, deep learning is a powerful and effective tool for NOMA signal detection.
The Kalman filter (KF) has been widely used in the carrier track to improve the tracking performance of receivers under challenging environments. The KF-based tracking assumes that the noise statistics are exactly known in advance and kept fixed during the whole iteration process. However, the noise statistics are difficult to know accurately and the fixed noise statistics cannot reflect the practical situations under time-varying environments. To further enhance the performance of carrier tracking, the adaptive strong tracking Kalman filter (STKF) is proposed. The adaptive fading factors are employed in the state prediction covariance to adjust the Kalman gain. Moreover, to improve the accuracy of fading factors in STKF tracking, the measurement noise covariance is adjusted based on the $C/N_{0}$ estimations. In addition, the working state is checked, and fading factors are used only when the system is not steady. The proposed algorithm has been implemented in the software receiver. The test results demonstrate that the proposed method has more superior tracking performance under challenging environments than other tracking methods.
1 December 2011 in Science China Technological Sciences
Existing integrated sensing and communication technology designed for monostatic settings segregates sensing and communication (S&C) at distinct terminals, impeding their adaptability to network paradigms. In this paper, we propose a general framework for joint target-localization and data-detection (JTD) in bistatic settings by using a combination of the deterministic known (DK) and random unknown (RU) symbols, e.g., pilot and data symbols. We first derive the performance limits for target localization-related parameters with combined symbols. We demonstrate that the Fisher information matrix (FIM) for target localization using the DK part can be expressed in a closed form through orthogonal projection, while that using the RU part aligns with the modified FIM in monostatic settings at an exponential rate with respect to the signal-to-noise ratio. Then, we propose a JTD scheme to exploit the reciprocal advantages for S&C, i.e., the detected data symbols are harnessed to enhance the target localization in an alternating way. Finally, simulation results validate our theoretical analysis and the effectiveness of the proposed JTD scheme.
17 October 2022 in IEEE Wireless Communications Letters
Influenced by the randomnesses in the realistic vehicle-to-infrastructure (V2I) scenarios, traditional deterministic optimization algorithms cannot be adopted directly to promote sensing-communication performance. In this letter, we consider a vehicle served by several base stations (BSs), model the integrated performance based on information theory, and formulate an optimization problem to enlarge the total information amount. A reinforcement-learning-based algorithm of jointly optimizing the bandwidth allocation and BS selection is proposed, where a double deep Q-network agent is adopted. Simulation results verify the system performance, which shows performing better than baselines.
An autonomous remote clock control system is proposed to provide time synchronization and frequency syntonization for satellite to satellite or ground to satellite time transfer, with the system comprising on-board voltage controlled oven controlled crystal oscillators (VC-OCXOs) that are disciplined to a remote master atomic clock or oscillator. The synchronization loop aims to provide autonomous operation over extended periods, be widely applicable to a variety of scenarios and robust. A new architecture comprising the use of frequency division duplex (FDD), synchronous time division (STDD) duplex and code division multiple access (CDMA) with a centralized topology is employed. This new design utilizes dual one-way ranging methods to precisely measure the clock error, adopts least square (LS) methods to predict the clock error and employs a third-order phase lock loop (PLL) to generate the voltage control signal. A general functional model for this system is proposed and the error sources and delays that affect the time synchronization are discussed. Related algorithms for estimating and correcting these errors are also proposed. The performance of the proposed system is simulated and guidance for selecting the clock is provided.