Coal dust is a great threat to coal mine workers' health and safety in coal mine production. Wet dust removal is one of the effective dust removal methods. As a solid, coal has different rough surfaces, which have a certain effect on the wetting effect of coal. In this paper, three coal samples with different surface wettability are used as the research objects. Phase-field interface tracking method is used to simulate the wetting of droplets on rough surfaces. From the simulation results, it can be concluded that the influence of the rough interface on the contact angle of the droplets is in accordance with the change rule described in the Wenzel model. As the roughness increases, the contact angle of the hydrophilic lignite surface gradually decreases. As the roughness increases, the contact angle of hydrophobic coking coal gradually increases. The change trend of the contact on the surface of weakly hydrophilic anthracite coal is the same as that of lignite. Due to the local and global differences, the contact angles obtained from the numerical model are slightly different from the values calculated from the Wenzel model.
28 November 2023 in International Journal of Coal Science & Technology
Among all methods for investigating the complex phenomenon of the coal and gas outburst, numerical modelling is the most comprehensive one that can consider all involved parameters and simulate the complex multi-physical phenomenon. The main aim of this paper is to review recent numerical modelling studies concerning this disastrous phenomenon observed in coal mining. The paper aims to analyse these studies comprehensively and identify any existing research gaps that could be addressed in future research endeavours. To this end, the concepts and equations that have been used in previous studies to simulate the solid and fluid behaviour during outburst initiation and how these equations are coupled to consider multiphysical interactions were reviewed. Both strengths and deficiencies in past outburst modelling work were highlighted. Finally, potential research topics for future studies were discussed in three categories; looking into the outburst phenomenon in the scale of the particles which is mostly focused on the discrete element method, conservation of the energy as a method to quantitively assess outburst initiation, and the application of statistics in both applying the heterogeneity in the models and assessing the possibility of the outburst occurrence.
7 January 2019 in Environmental Science and Pollution Research
Mine ventilation has always been critical for underground mining operations to ensure operational efficiency and compliance with safety and health statutory requirements. To obtain a thorough understanding of the ventilation flow characteristics on a longwall face, innovative three dimensional (3D) models, incorporating key features of the longwall equipment and a zone of immediate goaf area, were developed. Mesh independent studies were conducted to determine the desirable mesh required for a mesh-independent solution. Then the model results were validated using field ventilation survey data. At both intersections of maingate/tailgate (MG/TG) and face where the flow boundary changes sharply, the occurrence of undesirable flow separation which causes additional energy loss was identified, as well as its extent of influence. The recirculation of airflow resulting from separation in the TG will lead to accumulation of high concentrations of mine gas, thus regular inspection or continuous monitoring of gas concentration in that area is highly recommended, especially when high gas emission is expected from the working seam. In addition, we also investigated the influence of shearer position and cutting sequence on longwall ventilation. Overall, the longwall models developed in this study together with the flow characteristics obtained will provide fundamental basis for the investigation of longwall gas and dust issues in the future.
The pressure drop characteristics of negative pressure sampling drill pipe were studied experimentally in this work. The pressure drop was measured by a customized designed negative pressure sampling test system. The effects of the inner diameter of the drill pipe, the solid-gas rate and the inlet air velocity on the internal pressure drop of the drill pipe were analyzed. When the drill pipe is loaded under the same inner diameter and air velocity, the pressure drop of the drill pipe increases as the solid-gas rate increases. With the same inner diameter and solid-gas rate, the rate of gas phase pressure drop to solid phase pressure drop increases with the increase of air velocity. Through the experimental pressure drop data, the additional pressure drop coefficient model is established by dimension analysis method, which can accurately predict the pressure drop of the drill pipe. The maximum error between the modeled value and the measured value is –16.2%.