The replacement of oxide semiconducting TiO₂ nano particles with one dimensional TiO₂ nanotubes (TNTs) has been used for improving the electron transport in the dye-sensitized solar cells (DSSCs). Although use of one dimensional structure provides the enhanced photoelectrical performance, it tends to reduce the adsorption of dye on the TiO₂ surface due to decrease of surface area. To overcome this problem, we investigate the effects of TiCl₄ treatment on DSSCs which were constructed with composite films made of TiO₂ nanoparticles and TNTs. To find optimum condition of TNTs concentration in TiO₂ composites film, series of DSSCs with different TNTs concentration were made. In this optimum condition (DSSCs with 10 wt% of TNT), the effects of post treatment are compared for different TiCl₄ concentrations. The results show that the DSSCs using a TiCl₄ (90 mM) post treatment shows a maximum conversion efficiency of 7.83% due to effective electron transport and enhanced adsorption of dye on TiO₂ surface.

TiO₂ nanotube arrays are very attractive for dye-sensitized solar cells (DSSCs) owing to their superior charge percolation and slower charge recombination. Highly ordered, vertically aligned TiO₂ nanotube arrays have been fabricated by a three-step anodization process. Although the use of a one-dimensional structure provides an enhanced photoelectrical performance, the smaller surface area reduces the adsorption of dye on the TiO₂ surface. To overcome this problem, we investigated the effect of DSSCs constructed with a multilayer photoelectrode made of TiO₂ nanoparticles and TiO₂ nanotube arrays. We fabricated the novel multilayer photoelectrode via a layer-by-layer assembly process and thoroughly investigated the effect of various structures on the sample efficiency. The DSSC with a four-layer photoelectrode exhibited a maximum conversion efficiency of 7.22% because of effective electron transport and enhanced adsorption of dye on the TiO₂ surface.