The release of the world’s first dual-frequency GPS/Galileo smartphone, Xiaomi mi 8, in 2018 provides an opportunity for high-precision positioning using ultra low-cost sensors. In this research, the GNSS precise point positioning (PPP) accuracy of the Xiaomi mi 8 smartphone is tested in post-processing and real-time modes. Raw dual-frequency observations are collected over two different time windows from both of the Xiaomi mi 8 smartphone and a Trimble R9 geodetic-quality GNSS receiver using a short baseline, due to the lack of a nearby reference station to the observation site. The data sets are first processed in differential modes using Trimble business center (TBC) software in order to provide the reference positioning solution for both of the geodetic receiver and the smartphone. An in-house PPP software is then used to process the collected data in both of post-processing and real-time modes. Precise ephemeris obtained from the multi-GNSS experiment (MGEX) is used for post-processing PPP, while the new NAVCAST real-time GNSS service, Germany, is used for real-time PPP. Additionally, the real-time PPP solution is assessed in both of static and kinematic modes. It is shown that the dual-frequency GNSS smartphone is capable of achieving decimeter-level positioning accuracy, in both of post-processing and real-time PPP modes, respectively. Meter-level positioning accuracy is achieved in the kinematic mode.

Multi-constellation GNSS precise point positioning (PPP) typically uses the extended Kalman filter (EKF) for kinematic applications. Unfortunately, the obtained positioning accuracy in this approach is prone to errors caused by measurement outliers and the system’s dynamic model. An adaptive robust Kalman filter (RKF) was recently developed to mitigate these errors. However, RKF uses empirical values as detection thresholds for the outliers, which requires the measurements to be from the same constellation and of equal precision to obtain an optimal PPP solution. The classification robust adaptive Kalman filter (CAKF) has subsequently been developed to deal with measurements of different precisions, namely pseudorange and carrier-phase measurements. This paper proposes a real-time GPS/Galileo PPP system, which employs a modified version of CAKF called the Improved Robust adaptive Kalman Filter (IRKF). The positioning performance of GPS/Galileo PPP through the IRKF is initially verified in comparison with those obtained through the EKF, RKF, and CAKF using the Centre for Orbit Determination in Europe (CODE) final orbit and clock products in both of static and kinematic modes. The real-time GPS/Galileo PPP solution through the IRKF is then assessed in comparison with its near-real-time counterpart. The results indicate that when the IRKF approach is utilised, the positioning accuracy is significantly improved and the convergence behaviour is enhanced compared with results from EKF, conventional RKF, and CAKF. In the real-time mode, centimeter-level horizontal positioning accuracy is achieved under an open sky environment, while decimeter-level horizontal positioning accuracy is achieved under a challenging environment. On the other hand, decimeter-level accuracy is achieved for the vertical positioning component under all environmental scenarios. Moreover, the positioning accuracy of the real-time solution is comparable to the near-real-time counterpart.

The rapid rise of ultra-low-cost dual-frequency GNSS chipsets and micro-electronic-mechanical-system (MEMS) inertial sensors makes it possible to develop low-cost navigation systems, which meet the requirements for many applications, including self-driving cars. This study proposes the use of a dual-frequency u-blox F9P GNSS receiver with xsens MTi670 industrial-grade MEMS IMU to develop an ultra-low-cost tightly coupled (TC) triple-constellation GNSS PPP/INS integrated system for precise land vehicular applications. The performance of the proposed system is assessed through comparison with three different TC GNSS PPP/INS integrated systems. The first system uses the Trimble R9s geodetic-grade receiver with the tactical-grade Stim300 IMU, the second system uses the u-blox F9P receiver with the Stim300 IMU, while the third system uses the Trimble R9s receiver with the xsens MTi670 IMU. An improved robust adaptive Kalman filter is adopted and used in this study due to its ability to reduce the effect of measurement outliers and dynamic model errors on the obtained positioning and attitude accuracy. Real-time precise ephemeris and clock products from the Centre National d’Etudes Spatials (CNES) are used to mitigate the effects of orbital and satellite clock errors. Three land vehicular field trials were carried out to assess the performance of the proposed system under both open-sky and challenging environments. It is shown that the tracking capability of the GNSS receiver is the dominant factor that limits the positioning accuracy, while the IMU grade represents the dominant factor for the attitude accuracy. The proposed TC triple-constellation GNSS PPP/INS integrated system achieves sub-meter-level positioning accuracy in both of the north and up directions, while it achieves meter-level positioning accuracy in the east direction. Sub-meter-level positioning accuracy is achieved when the Stim300 IMU is used with the u-blox F9P GNSS receiver. In contrast, decimeter-level positioning accuracy is consistently achieved through TC GNSS PPP/INS integration when a geodetic-grade GNSS receiver is used, regardless of whether a tactical- or an industrial-grade IMU is used. The root mean square (RMS) errors of the proposed system’s attitude are about 0.878°, 0.804°, and 2.905° for the pitch, roll, and azimuth angles, respectively. The RMS errors of the attitude are significantly improved to reach about 0.034°, 0.038°, and 0.280° for the pitch, roll, and azimuth angles, respectively, when a tactical-grade IMU is used, regardless of whether a geodetic- or low-cost GNSS receiver is used.

Typically, the extended Kalman filter (EKF) is used for tightly-coupled (TC) integration of multi-constellation GNSS PPP and micro-electro-mechanical system (MEMS) inertial navigation system (INS) to provide precise positioning, velocity, and attitude solutions for ground vehicles. However, the obtained solution will generally be affected by both of the GNSS measurement outliers and the inaccurate modeling of the system dynamic. In this paper, an improved robust adaptive Kalman filter (IRKF) is adopted and used to overcome the effect of the measurement outliers and dynamic model errors on the obtained integrated solution. A real-time IRKF-based TC GPS+Galileo PPP/MEMS-based INS integration algorithm is developed to provide precise positioning and attitude solutions. The pre-saved real-time orbit and clock products from the Centre National d’Etudes Spatials (CNES) are used to simulate the real-time scenario. The performance of the real-time IRKF-based TC GNSS PPP/INS integrated system is assessed under open sky environment, and both of simulated partial and complete GNSS outages through two ground vehicular field trials. It is shown that the real-time TC GNSS PPP/INS integration through the IRKF achieves centimeter-level positioning accuracy under open sky environments and decimeter-level positioning accuracy under GNSS outages that range from 10 to 60 seconds. In addition, the use of IRKF improves the positioning accuracy and enhances the convergence of the integrated solution in comparison with the EKF. Furthermore, the IRKF-based integrated system achieves attitude accuracy of 0.052°, 0.048°, and 0.165° for pitch, roll, and azimuth angles, respectively. This represents improvement of 44 %, 48 %, and 36 % for the pitch, roll, and azimuth angles, respectively, in comparison with the EKF-based counterpart.

The release of low-cost dual-frequency (DF) global navigation satellite system (GNSS) modules provides an opportunity for low-cost precise positioning to support autonomous vehicle applications. The new GNSS modules support the US global positioning system (GPS) L1C/L2C or L5 civilian signals, the Russian GNSS Globalnaya Navigazionnaya Sputnikovaya Sistema (GLONASS) L1/L2, Europe’s GNSS Galileo E1/E5b, and Chinese GNSS BeiDou B1/B2 signals. The availability of the DF measurements allows for removal of the ionospheric delay, enhancing the obtained positioning accuracy. Unfortunately, however, the L2C signals are only transmitted by modernized GPS satellites. This means that fewer GPS DF measurements are available. This, in turn, might affect the accuracy and the convergence of the GPS-only precise point positioning (PPP) solution. Multi-constellation GNSS PPP has the potential to improve the positioning accuracy and solution convergence due to the high redundancy of GNSS measurements. This paper aims to assess the performance of real-time quad-constellation GNSS PPP using the low-cost u-blox Z9D-F9P module. The assessment is carried out for both open-sky and challenging environment scenarios. Static, simulated-kinematic, and actual field-kinematic trials have been carried out to evaluate real-time PPP performance. Pre-saved real-time precise orbit and clock products from the Centre National d’Etudes Spatiales are used to simulate the real-time scenario. It is shown that the quad-constellation GNSS PPP using the low-cost u-blox Z9D-F9P module achieves decimeter-level positioning accuracy in both the static and simulated-kinematic modes. In addition, the PPP solution convergence is improved compared to the dual- and triple-constellation GNSS PPP counterparts. For the actual kinematic trial, decimeter-level horizontal positioning accuracy is achieved through the GPS + GLONASS + Galileo PPP compared with submeter-level positioning accuracy for the GPS + GLONASS and GPS + Galileo PPP counterparts. Additionally, submeter-level vertical positioning accuracy is achieved through the GPS + GLONASS + Galileo PPP compared with meter-level positioning accuracy for GPS + GLONASS and GPS + Galileo PPP counterparts.

The global navigation satellite system (GNSS) signals are vulnerable to disruption sources, such as signal jamming. This, in turn, can cause severe degradation or discontinuities of the GNSS-based position, navigation, and timing services. The availability of multi-frequency signals from multi-constellation GNSS systems, such as Galileo and GLONASS, along with the modernization of GPS with multi-frequency signals, has the potential to increase the immunity of GNSS-based navigation systems to signal jamming. Despite various studies completed on the utilization of multi-frequency and multi-constellation global navigation satellite system (GNSS) signals to resist receiver jamming, there is still an urge to further investigate this concern under different circumstances. This paper presents an experimental evaluation of the advantages of the employment of multi-frequency multi-constellation GNSS signals for better GNSS receivers’ performance during signal jamming situations for high-dynamic platforms such as aircraft/drones. Additionally, the study examines the effects of both simulated and real jamming signals on all possible combinations of the GPS, Galileo, and GLONASS signal frequencies and constellations. Two airplane trajectory routes were built, and their corresponding RF signals were generated using the Spirent and Orolia GNSS signal simulators. The results indicated that the GPS multi-frequency-based solution maintains reliable positioning performance to some extent under low jamming scenarios. However, the combination of GPS, Galileo, and GLONASS signals proved its ability to provide a continuous and accurate positioning solution during both low and high jamming scenarios.