This work reports the successful preparation of nanoporous iron oxide/carbon composites through the in-situ growth of Prussian blue (PB) nanoparticles on the surface of graphene oxide (GO) nanosheets. The applied thermal treatment allows the conversion of PB nanoparticles into iron oxide (Fe2O3) nanoparticles. The resulting iron oxide/carbon composite exhibits higher specific capacitance at all scan rates than pure GO and Fe2O3 electrodes due to the synergistic contribution of electric double-layer capacitance from GO and pseudocapacitance from Fe2O3. Notably, even at a high current density of 20 A g−1, the iron oxide/carbon composite still shows a high capacitance retention of 51%, indicating that the hybrid structure provides a highly accessible path for diffusion of electrolyte ions.
Copper oxide-based nanocomposites are promising electrode materials for high-performance supercapacitors due to their unique properties that aid electrolyte access and ion diffusion to the electrode surface. Herein, a facile and low-cost synthesis in situ strategy based on co-precipitation and incorporation processes of reduced graphene oxide (rGO), followed by in situ oxidative polymerization of aniline monomer has been reported. CuO@Cu4O3/rGO/PANI nanocomposite revealed the good distribution of CuO@Cu4O3 and rGO within the polymer matrix which allows improved electron transport and ion diffusion process. Galvanostatic charge–discharge (GCD) results displayed a higher specific capacitance value of 508 F g−1 for CuO@Cu4O3/rGO/PANI at 1.0 A g−1 in comparison to the pure CuO@Cu4O3 278 F g−1. CuO@Cu4O3/rGO/PANI displays an energy density of 23.95 W h kg−1 and power density of 374 W kg−1 at the current density of 1 A g−1 which is 1.8 times higher than that of CuO@Cu4O3 (13.125 W h kg−1) at the same current density. The retention of the electrode was 93% of its initial capacitance up to 5000 cycles at a scan rate of 100 mV s−1. The higher capacitance of the CuO@Cu4O3/rGO/PANI electrode was credited to the formation of a fibrous network structure and rapid ion diffusion paths through the nanocomposite matrix that resulted in enhanced surface-dependent electrochemical properties.
Hierarchical heterostructures of mesoporous carbon wrapped around MXene nanolayers, which combine a porous skeleton, two-dimensional nanosheet morphology, and hybrid characteristics, have attracted research attention as electrode materials for energy storage systems. Nevertheless, it remains a significant challenge to fabricate such structures due to a lack of control of material morphology with high pore accessibility for the mesostructured carbon layers. As a proof of concept, I report a novel layer-by-layer N-doped mesoporous carbon (NMC)MXene heterostructure through the interfacial self-assembly of exfoliated MXene nanosheets and block copolymer P123/melamine–formaldehyde resin micelles with subsequent calcination treatment. The incorporation of MXene layers in the carbon matrix not only creates a spacer to inhibit the MXene sheet restacking and high specific surface area, but it also renders composites with good conductivity and additional pseudo capacitance. The as-prepared electrode with NMC and MXene exhibits outstanding electrochemical performance, with a gravimetric capacitance of 393 F g−1 at 1 A g−1 in an aqueous electrolyte and remarkable cycling stability. More importantly, the proposed synthesis strategy highlights the benefit of using MXene as a buttress for organizing mesoporous carbon in novel architectures with the potential for energy storage application.
Ordered mesoporous nitrogen-doped carbon (OMNC) materials are considered as the most promising material for supercapacitors. In this study, a highly ordered two-dimensional (2D) hexagonal mesostructured polymer was synthesized through a facile assembly of triblock polymer micelles and phenol-melamine/formaldehyde resin via an organic–organic assembly process in aqueous solution. After calcination, the novel OMNC materials with 2D hexagonal mesostructures were obtained. By further KOH activation, the surface area and the porosity of the OMNC significantly improved, and the internal mesoporous structures were maintained. The activated OMNC-800A displayed a specific capacitance as high as 475.75 F g−1 at 0.5 A g−1 with an outstanding cycling stability (over 100% capacitance retention during 2000 cycling tests at 100 mV s−1). These results confirm that the tubular mesochannels inside the OMNC are very beneficial in providing an accessible path for diffusion of the electrolyte, thereby improving the specific capacitance of OMNC at a high current density.