Superconducting cables have been proven in a variety of pilot projects and utility installations, demonstrating several of their advantages, including compact size and low energy losses, which can make the technology economically attractive for certain applications. It is clear though that different applications impose different requirements and challenges, but also opportunities for the cables. An interesting application is high-power DC transfer at medium voltage (MVDC). The high-current capability of the superconductor allows for a reduction in voltage while maintaining or increasing the power transfer level. In this way, one MVDC superconducting cable can replace one or more conventional high-voltage DC cables. In the European project Superconducting cables for sustainable energy transition (SCARLET), two types of MVDC cables will be developed, one based on HTS and one on MgB 2 materials. Additionally, protection requirements will be considered, including the development of a modular DC fault current limiter for 10 kA. A main motivation for the development is the elimination of costly high-voltage converter stations when going from high to medium voltage, e.g., for offshore wind power plants. Another feature is the combined hydrogen and electricity transmission from generation sites to industry or mobility end users. This paper describes the superconducting MVDC cable concept as well as the main challenges and research needed to develop and type test the cables.
3 January 2024 in IEEE Transactions on Applied Superconductivity
The combination of liquid hydrogen and superconducting cables presents a unique opportunity to distribute both hydrogen and bulk electricity in the same infrastructure. In particular, liquid hydrogen around 20 K is ideally suited for cooling the MgB 2 superconductor, resulting in a compact power cable that also leaves sufficient place for the hydrogen flow. Such a hybrid system operating in the MVDC range at 25 kV and 20 kA constitutes one of the main goals of the European project SCARLET. After a description of the rationale and benefits of the electricity – hydrogen system, various possible applications and a first distribution system are presented. Furthermore, the different cable components already designed are discussed along with the research challenges and general strategy for the development.
16 December 2016 in IEEE Transactions on Applied Superconductivity
BEST PATHS (acronym for “BEyond State-of-the-art Technologies for rePowering ac corridors and multi-Terminal HVDC Systems”) is a collaborative project of 40 leading European organizations from science and industry, supported by the 7th Research Framework Programme of the European Commission. The project investigates the feasibility of technological innovations that could advance high-capacity transmission links. These innovations include a demonstrator project dedicated to superconducting electric lines, which aims to validate the novel MgB2 technology for GW-level HVDC power transmission. The four-year project will thus demonstrate the operation of a full-scale 320 kV MgB2 monopole cable system that can transfer up to 3.2 GW. This paper focuses on the design and development activities for the 10 kA cable conductor, which were carried out in the first two years of the project.
21 October 2025 in Superconductor Science and Technology
More than 35 years after the discovery of high-temperature superconductivity and more than 20 years after the first field-test installation of a high-temperature superconducting cable, superconducting cables and lines were developed successfully up to high voltage levels and several long-term field tests demonstrated a reliable operation. There are many different applications where superconducting cables and lines were developed in the past. The technology readiness level is very different among the applications. Whereas medium voltage cables for urban areas with a length of a km have been field tested for long times in several locations, high voltage long distance cables are still in the technology concept status. This contribution is structured in four main parts. A proper description of superconducting cables cannot be made without an overview on the present material R&D and the lessons learned from the many successful projects in the past. Presently, there are substantial activities to further develop superconducting cables for AC and high-current DC applications and they are summarized in the second part. Recently, two start-up companies were founded and their R&D is also included. The third part of this paper covers the experience with a reliable operation and the cooling aspects. These contributions focus on the experience from field test applications and on future developments in this area. Hydrogen as an energy carrier is getting more and more attractive and due to the high energy density liquid hydrogen is expected to be widely used at least in some applications. This would favour the combination with superconductors very much because of its temperature of 20 K at pool boiling conditions. The last part of this contribution summarizes present R&D activities for hybrid energy lines with chemical and electricity transport in one line.
Superconducting links are an innovative solution for bulk power transmission, distinguished by their compact dimensions, high efficiency and small environmental footprint. As with any new technology field, there is a large amount of design possibilities for such links, each of them having a profound impact on the system configuration. For instance, changing the material can imply a change in the working temperature from 20 to 70 K and has consequences on the maximum link length. This article presents the dichotomic decision possibilities for the optimized design of a high-power superconducting link, focusing on some of the key components of the cable system. The complex design optimization process is exemplified using the European project Best Paths, in which the first 3-gigawatt-class superconducting cable system was designed, optimized, manufactured, and successfully tested.
23 August 2017 in Lecture Notes in Electrical Engineering