The fluoride content in groundwater varies depending on geological configuration. Fluoride problems tend to occur in places where these minerals are most abundant in rocks. The objective of the present work was to synthesize four biopolymers based on chitosan-polyvinyl alcohol (Ch-PVA) cross-linked with sodium tripolyphosphate pentabasic (TPP) and ethylene glycol diglycidyl ether (EGDE) and determine their ability to remove fluoride from water. The characterization of the Ch-PVA beads was performed by way of Scanning Electron Microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The percentage of humidity and the point of zero charge were determined. The Ch-PVA beads showed a surface area of 63.87 m2 g−1, a pore size of 7.6 nm, a point of zero charge of 7.4, and 98.6% humidity. The kinetic adsorption study was adjusted to the pseudo-second-order model and the adsorption equilibrium data were adjusted to the Freundlich adsorption isotherm, showing a maximum fluoride adsorption capacity of 12.64 mg g−1 at pH 7 and 30 °C, for the beads of Ch-PVA-NaOH-TPP. According to the thermodynamic parameters: −∆G°, +∆H° and −∆S°, fluoride adsorption is spontaneous, endothermic in nature and there is no random energy change in the solid/liquid interface during the adsorption process.
Dental and emaciated fluorosis is derived from the chronic intake of fluoride ions (F−) by consumption of food, tooth products and drinking water from groundwater. Recent reports indicate that in some regions of Mexico, the incidence of fluorosis in temporary and permanent dentitions have increased in recent years. The purpose of the present investigation was to determine the presence and distribution of F− ions in semi-confined aquifers, located in the basins of Lerma-Chapala and Valley of México. Temperature (T), pH, electrical conductivity (EC) and alkalinity were determined in situ, in 27 groundwater wells. The hardness, chloride ions (Cl−), free chlorine (Cl2), total dissolved solids (TDS) and bicarbonates (HCO3−), were determined in the laboratory. The high content of bicarbonate ions (HCO3−) is associated with the alteration of silicates and the presence of chloride ions (Cl−) due to the anthropogenic activity. The highest value of fluoride ions (F−) (1.31 mg/L) was identified in a well of the Lerma-Chapala basin and in 25% of the samples (1.056 mg/L) of the Valley of México basin. The groundwater in the Lerma-Chapala basin is of the Ca-HCO3 type and the water in the Valley of Mexico basin is Na-HCO3 and Ca-HCO3. According to the Gibbs diagram, the water of the Toluca Valley aquifer is recharged by local meteoric precipitation and consequent the water-rock interaction occurs. The correlation analysis shows the significant relationship between F− and CE (R = 0.5933), F− and alkalinity (R = 0.6924), F− and HCO3− (R = 0.6924) and F− and TDS (R = 0.5933). The correlations confirm that the content of fluoride ions present in groundwater is associated with high concentrations of bicarbonate ions and the presence of sodium, due to a process of alteration of the silicates.
3 May 2018 in International Journal of Photoenergy
The removal of pollutants from textile wastewater via electrochemical oxidation and a coupled system electrooxidation—Salix babylonica, using boron-doped diamond electrodes was evaluated. Under optimal conditions of pH 5.23 and 3.5 mA·cm−2 of current density, the electrochemical method yields an effective reduction of chemical oxygen demand by 41.95%, biochemical oxygen demand by 83.33%, color by 60.83%, and turbidity by 26.53% at 300 minutes of treatment. The raw and treated wastewater was characterized by infrared spectroscopy to confirm the degradation of pollutants. The wastewater was oxidized at 15-minute intervals for one hour and was placed in contact with willow plants for 15 days. The coupled system yielded a reduction of the chemical oxygen demand by 14%, color by 85%, and turbidity by 93%. The best efficiency for the coupled system was achieved at 60 minutes, at which time the plants achieved more biomass and photosynthetic pigments.
1 November 2017 in Revista Internacional de Contaminación Ambiental