Limited efficiency, lower durability, moisture absorbance, and pest/fungal/bacterial interaction/growth are the major issues relating to porous nonwovens used for acoustic and thermal insulation in buildings. This research investigated porous nonwoven textiles composed of recycled cotton waste (CW) fibers, with a specific emphasis on the above-mentioned problems using the treatment of silicon coating and formation of nanofibers via facile-solution processing. The findings revealed that the use of an economic and eco-friendly superhydrophobic (contact angle higher than 150°) modification of porous nonwovens with silicon nanofibers significantly enhanced their intrinsic characteristics. Notable improvements in their compactness/density and a substantial change in micro porosity were observed after a nanofiber network was formed on the nonwoven material. This optimized sample exhibited a superior performance in terms of stiffness, surpassing the untreated samples by 25–60%. Additionally, an significant enhancement in tear strength was observed, surpassing the untreated samples with an impressive margin of 70–90%. Moreover, the nanofibrous network of silicon fibers on cotton waste (CW) showed significant augmentation in heat resistance ranging from 7% to 24% and remarkable sound absorption capabilities. In terms of sound absorption, the samples exhibited a performance comparable to the commercial standard material and outperformed the untreated samples by 20% to 35%. Enhancing the micro-roughness of fabric via silicon nanofibers induced an efficient resistance to water absorption and led to the development of inherent self-cleaning characteristics. The antibacterial capabilities observed in the optimized sample were due to its superhydrophobic nature. These characteristics suggest that the proposed nano fiber-treated nonwoven fabric is ideal for multifunctional applications, having features like enhanced moisture resistance, pest resistance, thermal insulation, and sound absorption which are essential for wall covers in housing.

Photocatalyst immobilization on support materials is essential for large-scale applications. Here, we describe growth of a p-n junction catalyst (NiO/TiO₂) on a stainless-steel mesh (SSM) support using a facile hydrothermal method. The morphological superiority of the composite over previously reported NiO/TiO₂ catalysts was probed using scanning and transmission electron microscopy. Flower petal–like NiO grew uniformly on SSM, which was evenly covered by TiO₂ nanoparticles. Theoretical and experimental X-ray diffraction patterns were compared to analyze the development of the composite during various stages of synthesis. The photocatalytic activity of a powdered catalyst and SSM@catalyst was compared by measuring bisphenol A (BPA) degradation. SSM@NiO/TiO₂ achieved the highest rate of BPA degradation, removing 96% of the BPA in 120 min. Scavenging experiments were used to investigate the charge separation and degradation mechanism. SSM@NiO/TiO₂ showed excellent reusability potential, achieving and sustaining 91% BPA removal after 10 rounds of cyclic degradation. Reusability performance, composite resilience, apparent quantum yields, and figures of merit suggest that SSM@NiO/TiO₂ has excellent utility for practical applications.