The geometry of porous materials is complex, and the determination of the true surface area is important because it affects current density, how certain reactions will progress, their rates, etc. In this work, we have investigated the dependence of the electrochemical deposition of copper coatings on the geometry of the copper substrate (flat plates or 3D foams). Chronoamperometric measurements show that copper deposition occurs 3 times faster on copper foams than on a flat electrode with the same geometric area in the same potential range, making metal foams great electrodes for electrowinning. Using electrochemical impedance spectroscopy (EIS), the mechanism of copper deposition was determined at various concentrations and potentials, and the capacities of the double electric layer (DL) for both types of electrodes were calculated. The DL capacity on the foam electrodes is up to 14 times higher than that on the plates. From EIS data, it was determined that the charge transfer resistance on the Cu foam electrode is 1.5–1.7 times lower than that on the Cu plate electrode. Therefore, metal foam electrodes are great candidates to be used for processes that are controlled by activation polarization or by the adsorption of intermediate compounds (heterogeneous catalysis) and processes occurring on the entire surface of the electrode.
Metal foams offer a substantial specific surface area and sturdy frame, which makes them great candidates for various applications such as catalysts, sensors, heat sinks, etc. Cobalt and its various compounds are being considered as a cheaper alternative for precious and rare metal catalysts. The cobalt foams have been electrodeposited under galvanostatic and current pulse modes; the porous surface was created using a dynamic hydrogen bubble template. In order to obtain the highest porosity, four different solutions were tested, as well as a wide current density window (0.6–2.5 A/cm²), in addition many different combinations of pulse durations were applied. The effects of surfactant (isopropanol) on porosity were also investigated. The morphology of obtained foams was examined by SEM coupled with EDS, and XRD spectroscopy. True surface area was estimated based on the values of a double electric layer capacitance that was extracted from EIS data. Cobalt foams were modified using K3[Fe(CN)6] solution and cyclic voltammetry to form a cobalt hexacyanoferrate complex on the foam surface. In order to find optimal modification conditions, various potential scan rates and numbers of cycles were tested as well. Free chlorine sensing capabilities were evaluated using chronoamperometry.
1 December 2021 in Journal of Magnetism and Magnetic Materials