BAOHUA ZHU

Mr. BAOHUA ZHU

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 December 2021 in Biosensors
Verified
Journal Article
Open access
PDF file
WYWei Yue
Wei Yue
EKEun Seong Kim
Eun Seong Kim
BZBAOHUA ZHU
BAOHUA ZHU
JCJIAN CHEN
JIAN CHEN
Jun-Ge LiangJun-Ge Liang
Jun-Ge Liang
Nam Young KimNam Young Kim
Nam Young Kim
In this study, we propose a high-performance resonator-based biosensor for mediator-free glucose identification. The biosensor is characterized by an air-bridge capacitor and fabricated via integrated passive device technology on gallium arsenide (GaAs) substrate. The exterior design of the structure is a spiral inductor with the air-bridge providing a sensitive surface, whereas the internal capacitor improves indicator performance. The sensing relies on repolarization and rearrangement of surface molecules, which are excited by the dropped sample at the microcosmic level, and the resonance performance variation corresponds to the difference in glucose concentration at the macroscopic level. The air-bridge capacitor in the modeled RLC circuit serves as a bio-recognition element to glucose concentration (εglucoseC0), generating resonant frequency shifts at 0.874 GHz and 1.244 GHz for concentrations of 25 mg/dL and 300 mg/dL compared to DI water, respectively. The proposed biosensor exhibits excellent sensitivity at 1.38 MHz per mg/dL with a wide detection range for glucose concentrations of 25–300 mg/dL and a low detection limit of 24.59 mg/dL. Additionally, the frequency shift and concentration are highly linear with a coefficient of determination of 0.98823. The response time is less than 3 s. We performed multiple experiments to verify that the surface morphology reveals no deterioration and chemical binding, thus validating the reusability and reliability of the proposed biosensor.

30 January 2020 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
BZBAOHUA ZHU
BAOHUA ZHU
ZWZhiji Wang
Zhiji Wang
EKEun‐Seong Kim
Eun‐Seong Kim
Nam Young KimNam Young Kim
Nam Young Kim

28 November 2022 in Brain Sciences
Verified
Journal Article
Open access
PDF file
SYShan Yang
Shan Yang
HHHyeon Sik Hwang
Hyeon Sik Hwang
BZBAOHUA ZHU
BAOHUA ZHU
JCJIAN CHEN
JIAN CHEN
Enkhzaya GanboldEnkhzaya Ganbold
Enkhzaya Ganbold
Nam Young KimNam Young Kim
Nam Young Kim
Virtual reality (VR), a rapidly evolving technology that simulates three-dimensional virtual environments for users, has been proven to activate brain functions. However, the continuous alteration pattern of the functional small-world network in response to comprehensive three-dimensional stimulation rather than realistic two-dimensional media stimuli requires further exploration. Here, we aimed to validate the effect of VR on the pathways and network parameters of a small-world organization and interpret its mechanism of action. Fourteen healthy volunteers were selected to complete missions in an immersive VR game. The changes in the functional network in six different frequency categories were analyzed using graph theory with electroencephalography data measured during the pre-, VR, and post-VR stages. The mutual information matrix revealed that interactions between the frontal and posterior areas and those within the frontal and occipital lobes were strengthened. Subsequently, the betweenness centrality (BC) analysis indicated more robust and extensive pathways among hubs. Furthermore, a specific lateralized channel (O1 or O2) increment in the BC was observed. Moreover, the network parameters improved simultaneously in local segregation, global segregation, and global integration. The overall topological improvements of small-world organizations were in high-frequency bands and exhibited some degree of sustainability.

21 January 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JCJIAN CHEN
JIAN CHEN
BZBAOHUA ZHU
BAOHUA ZHU
SYShan Yang
Shan Yang
WYWei Yue
Wei Yue
DLDong-Min Lee
Dong-Min Lee
Nam Young KimNam Young Kim
Nam Young Kim
In this study, we propose a miniaturized bandpass filter (BPF) developed by combining an approximate circular (36-gon) winding inductor, a circinate capacitor, and five air-bridge structures fabricated on a gallium arsenide (GaAs) substrate using an integrated passive device (IPD) technology. We introduced air-bridge structures into the outer metal wire to improve the capacitance per unit volume while utilizing a miniaturized chip with dimensions 1538 μm × 800 μm (0.029 λ0 × 0.015 λ0) for the BPF. The pattern was designed and optimized by simulating different dimensional parameters, and the group delay and current density are presented. The equivalent circuit was modeled to analysis various parasitic effect. Additionally, we described the GaAs-based micro-nano scale fabrication process to elucidate the proposed IPD technology and the physical structure of the BPF. Measurements were conducted with a center frequency of 1.53 GHz (insertion loss of 0.53 dB) and a 3-dB fractional bandwidth (FBW) of 70.59%. The transmission zero was located at 4.16 GHz with restraint of 35.86 dB. Owing to the benefits from its miniaturized chip size and high performance, the proposed GaAs-based IPD BPF was verified as an excellent device for various S-band applications, such as satellite communication, keyless vehicle locks, wireless headphones, and radar.

19 September 2019 in Materials
Verified
Journal Article
Open access
PDF file
BZBAOHUA ZHU
BAOHUA ZHU
Nam Young KimNam Young Kim
Nam Young Kim
ZWZhiji Wang
Zhiji Wang
EKEun Seong Kim
Eun Seong Kim
In this work, a miniaturized bandpass filter (BPF) constructed of two spiral intertwined inductors and a central capacitor, with several interdigital structures, was designed and fabricated using integrated passive device (IPD) technology on a GaAs wafer. Five air-bridge structures were introduced to enhance the mutual inductive effect and form the differential geometry of the outer inductors. In addition, the design of the differential inductor combined with the centrally embedded capacitor results in a compact construction with the overall size of 0.037λ0 × 0.019λ0 (1537.7 × 800 μm2) where λ0 is the wavelength of the central frequency. For the accuracy evolution of the equivalent circuit, the frequency-dependent lumped elements of the proposed BPF was analyzed and modeled through the segment method, mutual inductance approach, and simulated scattering parameters (S-parameters). Afterward, the BPF was fabricated using GaAs-based IPD technology and a 16-step manufacture flow was accounted for in detail. Finally, the fabricated BPF was wire-bonded with Au wires and packaged onto a printed circuit board for radio-frequency performance measurements. The measured results indicate that the implemented BPF possesses a center frequency operating at 2 GHz with the insertion losses of 0.38 dB and the return losses of 40 dB, respectively, and an ultrawide passband was achieved with a 3-dB fraction bandwidth of 72.53%, as well. In addition, a transmission zero is located at 5.32 GHz. Moreover, the variation of the resonant frequency with different inductor turns and metal thicknesses was analyzed through the simulation results, demonstrating good controllability of the proposed BPF.

14 June 2023 in Bioengineering
Verified
Journal Article
Open access
PDF file
SYShan Yang
Shan Yang
Enkhzaya GanboldEnkhzaya Ganbold
Enkhzaya Ganbold
BZBAOHUA ZHU
BAOHUA ZHU
JCJIAN CHEN
JIAN CHEN
ZWZhiji Wang
Zhiji Wang
Nam Young KimNam Young Kim
Nam Young Kim
Due to the current limitations of three-dimensional (3D) simulation graphics technology, mind wandering commonly occurs in virtual reality tasks, which has impeded it being applied more extensively. The right ventrolateral prefrontal cortex (rVLPFC) plays a vital role in executing continuous two-dimensional (2D) mental paradigms, and transcranial direct current stimulation (tDCS) over this cortical region has been shown to successfully modulate sustained 2D attention. Accordingly, we further explored the effects of electrical activation of the rVLPFC on 3D attentional tasks using anodal high-definition (HD)-tDCS. A 3D Go/No-go (GNG) task was developed to compare the after effects of real and sham brain stimulation. Specifically, GNG tasks were periodically interrupted to assess the subjective perception of attentional level, behavioral reactions were tracked and decomposed into an underlying decision cognition process, and electroencephalography data were recorded to calculate event-related potentials (ERPs) in rVLPFC. The p-values statistically indicated that HD-tDCS improved the subjective mentality, led to more cautious decisions, and enhanced neuronal discharging in rVLPFC. Additionally, the neurophysiological P300 ERP component and stimulation being active or sham could effectively predict several objective outcomes. These findings indicate that the comprehensive approach including brain stimulation, 3D mental paradigm, and cross-examined performance could significantly lengthen and robustly compare sustained 3D attention.