Red-bed soft rock easily softens and disintegrates when it comes into contact with water, which is the main factor restricting the application of soft rock as an engineering filler. Therefore, research on the influence of seawater on soft rock softening has great significance for the application of soft rock in marine engineering. To examine the softening mechanism of soft rock under seawater conditions, two kinds of soft rock softening experiments, as well as ion inhibition tests of soft rock softening, were performed under seawater and pure water conditions, and the results were compared. The variation in the soft rock composition, the deformation and failure characteristics of soft rock under the influence of sea water, and the variation in main cations in the softening process of soft rock are examined successively; the influences of different ions on soft rock softening are further analysed. Based on the analyses, the softening mechanism and control method of soft rock under sea water conditions are expounded. The study showed that soft rock softening was inhibited by seawater, which decreased the softening degree of soft rock. The main cations in seawater had an inhibitory effect on soft rock softening, and the order of inhibition was Ca²⁺ > Mg²⁺ > Na⁺. According to the inhibitory effect of ions on soft rock softening, we propose that seawater or calcium salt should be added to reduce the softening of soft rock in soft rock engineering and improve the mechanical strength of soft rock; in addition, soft rock can be considered a raw material in marine engineering. The experimental results have great significance for studies of the disintegration mechanism and inhibitory rules of soft rock under the influence of seawater and provide a theoretical basis for the application of soft rock in marine engineering, such as in artificial reef engineering and coastal dike engineering.

As a typical representative of red beds, the softening and disintegration of red sandstone when it encounters water is an important cause of initiated engineering disasters. However, research on the softening of this kind of rock has mainly focused on the still water–rock interaction. There is still a lack of quantitative analysis and a mechanistic explanation for the basic experimental study of dynamic water–rock interactions. Therefore, based on the independently developed multifunctional open channel hydraulic test equipment, the still water was used as the reference by designing the saturation test of red sandstone under two typical flow patterns—laminar flow and turbulent flow—and combined with a three-dimensional numerical simulation; specifically, the chemical, physical and mechanical effects of different flow patterns on the softening of red sandstone are discussed, and the mechanism of the influence of different flow patterns on the softening of red sandstone was further revealed. The results show that under different flow patterns, as the flow of water increased, the alkalinity of the circulating solution became stronger, the speed of stabilization of the ion concentration became faster, the development of the microscopic structure of the corresponding rock became higher and the decrease in mechanical strength became greater. The flow state affects the processes of rock softening and breaking by acting on the rock from the three aspects of chemistry, physics and mechanics. The study makes up for the deficiency of the quantitative analysis index of rock softening under dynamic water conditions and further improves the influence mechanism of different flow patterns on soft rock softening in red beds under dynamic water conditions. This research also provides a specific method for the protection of estuarine and coastal bank slopes with rich red-bed soft rock dissection under different flow patterns.