Yanfeng Gao

Dr. Yanfeng Gao


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2019 in Polymers
Verified
Journal Article
Open access
PDF file
CWChao Wu
Chao Wu
YGYanfeng Gao
Yanfeng Gao
XLXidong Liang
Xidong Liang
SGStanislaw Gubanski
Stanislaw Gubanski
Qian WangQian Wang
Qian Wang
SLShaohua Li
Shaohua Li
Silicone rubber composites filled with nano-silica are currently widely used as high voltage insulating materials in power transmission and substation systems. We present a systematic study on the dielectric and mechanical performance of silicone rubber filled with surface modified and unmodified fumed nano-silica. The results indicate that the different interfaces between the silicone rubber and the two types of nano-silica introduce changes in their dielectric response when electrically stressed by a sinusoidal excitation in the frequency range of 10−4–1 Hz. The responses of pure silicone rubber and the composite filled with modified silica can be characterized by a paralleled combination of Maxwell-Wagner-Sillars interface polarization and DC conduction. In contrast, the silicone rubber composite with the unmodified nano-silica exhibits a quasi-DC (Q-DC) transport process. The mechanical properties of the composites (represented by their stress-strain characteristics) reveal an improvement in the mechanical strength with increasing filler content. Moreover, the strain level of the composite with a modified filler is improved.

4 February 2023 in Polymers
Verified
Journal Article
Open access
PDF file
Qian WangQian Wang
Qian Wang
WBWeining Bao
Weining Bao
YGYanfeng Gao
Yanfeng Gao
SLShuqi Liu
Shuqi Liu
SLShuming Liu
Shuming Liu
XLXidong Liang
Xidong Liang
Composite insulators have gradually become the preferred approach for electrical insulation in power systems, especially in polluted areas. Composite insulators consist of three main components: the shed, rod, and end fitting. Insulators withstand mechanical stresses via rods that are composed of glass-fiber-reinforced epoxy (GFRE). However, regardless of the high tensile strength of GFRE rods, in real-life operation, abnormal fractures have frequently been reported all over the world, which substantially increase the risk of major accidents in power systems. Fractural accidents mainly consist of brittle and decay-like fractures, which exhibit rather different morphologies at the cross sections. Brittle fracture has been effectively eliminated, while the mechanism of decay-like fracture has still not been clearly revealed. In this study, surface discharge tests were applied to investigate the discharge influence on the degradation of GFRE. The test successfully simulated the composition variation of the rods in real-life composite insulators with decay-like fractures. Moreover, it confirmed that the distinction between the characteristics of brittle fracture and decay-like fracture stems from epoxy degradation due to hydrolysis and carbonization. In addition, the respective influences of the resin type, glass fiber type, and acid liquid immersion on the degradation process were probed, and the degradation mechanism proposed in this research was verified. Based on the results, measures for preventing the development of decay-like fractures in real-life operations were determined.

28 November 2019
Verified
Book Chapter
Closed access
PDF file
YGYanfeng Gao
Yanfeng Gao
WCWei Cai
Wei Cai
YLYi Lu
Yi Lu
CDChun Deng
Chun Deng
SGShun’aN Gao
Shun’aN Gao
JZJifei Zhang
Jifei Zhang

27 February 2026 in Energies
Verified
Journal Article
Open access
PDF file
FJFu Jianbing
Fu Jianbing
YGYanfeng Gao
Yanfeng Gao
LWLiming Wang
Liming Wang
YLYi Lu
Yi Lu
FYFanghui Yin
Fanghui Yin
KWKang Wang
Kang Wang
Silicone rubber optical fiber composite insulators introduce interface defects due to embedded optical fibers, and their structural design remains immature, resulting in inadequate interface sealing performance. In actual operation, the combined effects of high electric fields, high humidity and heat, and mechanical loads lead to frequent failures. This study proposes replacing conventional silicone rubber with cycloaliphatic epoxy resin (CEP), which exhibits superior aging resistance, to enhance long-term operational reliability. However, the correlation mechanism between the structural parameters of CEP optical fiber insulators and their electromechanical properties remains unclear, lacking corresponding design basis. Therefore, based on finite element simulation technology, this study systematically analyzed the influence patterns of core rod diameter, fiber implantation method, spiral groove angle, fiber implantation quantity, and voltage equalization ring structural parameters (outer diameter, circular tube radius, shielding depth) on their mechanical and electrical properties. Research findings indicate that in terms of mechanical properties, the helical groove structure with a 40 mm core rod diameter, a groove angle of 135°, and six embedded optical fibers exhibits the lowest optical fiber strain. In terms of electrical performance, the minimum peak electric field strength at the end of the insulator occurs when the equalizing ring has an outer diameter of 370 mm, the circular tube radius is 25 mm, and the shielding depth is 50 mm, reaching only 4.6 kV/cm, which meets the requirements of DL/T 1000.3-2015. This study establishes optimization principles for key structural parameters of CEP optical fiber composite insulators, offering significant engineering value for enhancing the overall performance of optical fiber composite insulators and improving the operational safety of power systems.