Chen Peng

Dr. Chen Peng


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2011 in IEEE Journal of Quantum Electronics
Verified
Journal Article
Closed access
GCGang Chen
Gang Chen
TYTao Yang
Tao Yang
CPChen Peng
Chen Peng
Rainer MartiniRainer Martini
Rainer Martini
We present a self-consistent approach to simulate the output characteristics of a quantum cascade laser (QCL), such as the current-light (I-L) and current-voltage (I-V) curves. Unlike the conventional 1(1/2) period model, our new QCL model includes the spontaneous emission and the stimulated emission, which allow the numerical study of the laser behavior above its threshold. The corresponding numerical method is proposed to solve the full laser rate equations in a self-consistent way. For a given QCL, the I-L and I-V curves are calculated, showing a good agreement with the typical QCL output characteristics. Besides the output properties, this new model also provides a way to study the photon and electron dynamics in the QCL cavity above the laser threshold. An example of the QCL photon and electron response to the interband ultrafast optical excitation is given at the end of this paper. All simulation results show the validity of the new model.

30 October 2017 in Optics Letters
Verified
Journal Article
Closed access
PDF file
CPChen Peng
Chen Peng
HZHaijun Zhou
Haijun Zhou
LZLiguo Zhu
Liguo Zhu
TCTao Chen
Tao Chen
QLQiao Liu
Qiao Liu
ZLZeren Li
Zeren Li
Purified frequency modulation (FM) is demonstrated in a standard middle-infrared quantum cascade laser by illuminating its front facet with two near-infrared (NIR) lasers. A 2 mW laser at 1550 nm is utilized to modulate the amplitude and frequency of a quantum cascade laser, and the associated amplitude modulation (AM) is suppressed by a 1.85 mW laser at 850 nm. Due to the hot carrier effect and the increment of electron temperature, the AM has been decreased. In addition, the free carrier concentration increases in the active region due to the two NIR illuminations, which enhance the FM. Purified FM is beneficial in improving the signal fidelity for free-space optical communication and high-speed FM spectroscopy.

20 April 2022 in Optics Express
Verified
Journal Article
Closed access
ALAi Liu
Ai Liu
LGLie Gao
Lie Gao
WZWenchao Zou
Wenchao Zou
JHJingsheng Huang
Jingsheng Huang
QWQiang Wu
Qiang Wu
TZTao Zhu
Tao Zhu
High speed surface defects detection of mirrors is of great significance, for detecting the quality of the mirrors on-site, and ultimately for monitoring the operating states of laser systems. The speeds of conventional proposals are relatively low as they utilize mechanically scanning methods or two-dimensional charge-coupled devices. Here, we propose a high speed surface detection method based on ultrafast single-pixel imaging, which consists of a spatial Fourier optical module for frequency-space mapping and a dispersive Fourier transform module for frequency-time mapping. An optical grating is utilized to map the wideband spectrum of dissipative soliton into the spatial domain under far-field diffraction, where the mirror is inspected. Dispersive Fourier transform is used to map the surface-defects-coded spectral information into the temporal domain, then recorded by a high speed single-pixel detector. The detection system permits continuous single-shot spectra measurement with a frame rate equivalent to the pulse repetition rate (8.4 MHz). We extract amplitude defects by demodulating light intensity, and obtain phase defects by demodulating the interference spectrum with a Mach-Zehnder interferometer structure. Experimental results show that the damaged mirror with a two-dimensional width of 10 × 13 mm can be obtained with a spatial resolution of 90 µm. The obtained phase accuracy after Hilbert transformation is 0.00217 rad, corresponding to a depth resolution of 51 nm. This scheme can find promising applications for surface defects detection of large aperture mirrors, and real-time monitoring of laser systems with high energy.

14 April 2016 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
CPChen Peng
Chen Peng
GCGang Chen
Gang Chen
JTJianping Tang
Jianping Tang
LWLijun Wang
Lijun Wang
ZWZhongquan Wen
Zhongquan Wen
Rainer MartiniRainer Martini
Rainer Martini
We demonstrated a high-speed mid-infrared frequency modulation spectroscopy scheme based on a distributed-feedback quantum Cascade laser for the application in trace gas sensing by means of all-optical frequency modulation. With this method, the modulation frequency spectrum of a gas sample can be obtained within the mid-infrared pulse duration of ~200 ns. A frequency modulation of the middle infrared lasing optical frequency was achieved in quantum Cascade laser with a modulation frequency of 200 MHz by illuminating with a 1550-nm near-infrared laser. For CO gas, with 2-mW near-infrared illumination, the noise-equivalent sensitivity of the frequency modulation spectroscopy was estimated to be 0.12 ppmv for an absorption length of 6.1 m, indicating an improvement by a factor of 7 compared with Voigt-fitted direct absorption spectroscopy (0.84 ppmv). The frequency modulation signal was found to be proportional to the incident near-infrared power, and therefore, the noise-equivalent sensitivity is expected to be further improved by increasing the near-infrared illumination power. This high-speed frequency modulation spectroscopy based on the distributed-feedback quantum Cascade laser has promising applications in high-speed and high-sensitivity gas sensing.

9 August 2013 in Semiconductor Science and Technology
Verified
Journal Article
Closed access
PDF file
CPChen Peng
Chen Peng
GCGang Chen
Gang Chen
TYTao Yang
Tao Yang
SPSeong Wook Park
Seong Wook Park
Rainer MartiniRainer Martini
Rainer Martini
We present a self-consistent numerical approach to simulate the output characteristics of a mid-infrared quantum cascade laser, taking into account the effects of both effective subband electron temperature (Te) and optical emission. The current–light (I–L) and current–voltage (I–V) characteristics are simulated with and without the effect of Te. The simulation agrees with the reported experimental results. A comparison between the two cases (with and without optical emission) reveals that optical emission helps bring down the subband effective electron temperature.

12 March 2024 in Optics Express
Verified
Journal Article
Closed access
TDTing Deng
Ting Deng
CPChen Peng
Chen Peng
JHJunzhang He
Junzhang He
YCYan Chang
Yan Chang
YZYanlin Zhu
Yanlin Zhu
JXJin Xiang
Jin Xiang
Bound states in the continuum (BICs) allow to obtain an ultrahigh-quality-factor optical cavity. Nevertheless, BICs must be extended in one or more directions, substantially increasing the device footprint. Although super-cavity mode quasi-BICs supported by single nanopillars have been demonstrated recently, their low-quality factor and localized electromagnetic field inside the dielectric nanopillar are insufficient for high-sensitivity refractive index sensing applications. We propose a ring structure rotated by a dielectric sectorial nanostructure, which can achieve a high quality factor by breaking the rotational symmetry of the ring structure with a footprint as small as 3 µm2. As a straightforward application, we demonstrate high performance local refractive index and nanoscale film thickness sensing based on rotational symmetry breaking induced BICs. These BICs reach quality factor and sensitivity of one order of magnitude better than those of conventional super-cavity mode BICs. The proposed method provides insights into the design of compact high quality factor photonic devices, opening up new possibilities for applications in refractive index and nanoscale film thickness sensing.