Detection of volatile organic compounds (VOCs) at parts-per-billion (ppb) level is one of the most challenging tasks for miniature gas sensors because of the high requirement on sensitivity and the possible interference from moisture. Herein, for the first time, we present a novel platform based on a hybrid photonic cavity with metal-organic framework (MOF) coatings for VOCs detection. We have fabricated a compact gas sensor with detection limitation ranging from 29 to 99 ppb for various VOCs including styrene, toluene, benzene, propylene and methanol. Compared to the photonic cavity without coating, the MOF-coated solution exhibits a sensitivity enhancement factor up to 1000. The present results have demonstrated great potential of MOF-coated photonic resonators in miniaturized gas sensing applications.

Complex refractive index sensing is proposed and experimentally demonstrated in optofluidic sensors based on silicon photonic crystal nanobeam cavities. The sensitivities are 58 and 139 nm/RIU, respectively, for the real part ($n$) and the imaginary part ($\kappa$) of the complex refractive index, and the corresponding detection limits are $1.8\times {10}^{-5}$ RIU for $n$ and $4.1\times {10}^{-6}$ RIU for $\kappa$. Moreover, the capability of the complex refractive index sensing method to detect the concentration composition of the ternary mixture is demonstrated without the surface immobilization of functional groups, which is impossible to realize with the conventional refractive index sensing scheme.

Fano resonance is a prevailing interference phenomenon that stems from the intersection between discrete and continuum states in many fields. We theoretically and experimentally characterize the asymmetric Fano lineshape in side-coupled waveguide Fabry–Pérot and photonic crystal nanobeam cavities. The measured quality-factor of the Fano resonance before tuning is 28 100. A nanoelectromechanical systems bidirectional actuator is integrated seamlessly to control the shape of the Fano resonance through in-plane translations in two directions without sacrificing the quality-factor. The peak intensity level of the Fano resonance can be increased by 8.5 dB from 60 nW to 409 nW while the corresponding dip intensity is increased by 12.8 dB from 1 nW to 18 nW. The maximum recorded quality-factor throughout the tuning procedure is up to 32 500. Potential applications of the proposed structure include enhancing the sensitivity of sensing, reconfigurable nanophotonics devices, and on-chip intensity modulator.

Here, we elucidate a novel biosensor in aqueous environments based on a slotted photonic crystal nanobeam cavity. A slot is introduced in the center of the photonic crystal nanobeam cavity, which reduces the mode volume by an order of 10 without sacrificing the quality factor and sensitivity. This sensor is characteristic of an ultra-small mode volume of $0.076{(\lambda /n)}^3$ and shows a prominent advantage in regards to single nanoparticle detection, where the minimum detectable nanoparticle radius is around 1 nm. Additionally, its quality factor is as high as $6.08\times {10}^6$ and its sensitivity is around 460 nm/RIU, which is promising for refractive index sensing. This sensor can also be integrated into a high-density array of sensor networks because of the unparalleled fabrication advantages.

In this paper, based on the low loss double strip silicon nitride platform, we designed and fabricated an ultra-low loss 1×4 microwave photonic beamforming chip, which contains a 1×4 beam splitter and four 5-bit optical delay lines. Each optical delay line can achieve 32 delay states varying from 0 ps to about 130 ps, which can support 21 different beamforming angles covers from −56.42° to 56.68° for 10 GHz RF signal. A low on-chip insertion loss of about 4 dB is achieved for each 5-bit optical delay line. Furthermore, a very low loss delay ratio of about 0.0016 dB/ps is achieved and a recorded low loss fluctuation of about 0.3 dB is obtained during the 32 states delay switching. In addition, the switching speed and driving power consumptions of the proposed beamforming chip were investigated. The proposed beamforming chip could have great potential in optical controlled phased antenna arrays systems.

A compact and broadband silicon mode-order converter (MOC) scheme by employing reciprocal mode evolution between asymmetric input/output taper and bricked subwavelength gratings (BSWG) is proposed. In the proposed MOC, a quasi-TE₀ mode is generated in the BSWG region, which can be regarded as an effective bridge between the two TE modes to be converted. Flexible mode conversion can be realized by only choosing appropriate structure parameters for specific mode transitions between input/output modes and the quasi-TE₀ mode. By combing 3D finite difference time domain (FDTD) and particle swarm optimization (PSO) method, TE₀-TE₁ and TE₀-TE₂ MOCs are optimal designed, which can efficiently convert TE₀ mode to TE₁ and TE₂ modes with lengths of 9.39 µm and 11.27 µm, respectively. Results show that the insertion losses of <1 dB and crosstalk of <-15 dB are achieved for both TE₀-TE₁ and TE₀-TE₂ MOCs, the corresponding working bandwidth are 128 nm (1511∼1639 nm) and 126 nm (1527∼1653 nm), respectively. Additionally, the MOCs can be fabricated with only single etch step with minimum feature size of 145 nm.