Lei Zhang

Dr. Lei Zhang

Department of Automation, Ocean University of China
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 August 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LZLei Zhang
Lei Zhang
XLXinzhi Liu
Xinzhi Liu
PRPing Ren
Ping Ren
ZGZenghui Gao
Zenghui Gao
ALAng Li
Ang Li
To solve the problems of large landing impact, vibration, and poor adaptability to complex ground surfaces in the motion of a foot-type robot, a two-degree-of-freedom flexible foot-end structure was proposed and designed in this study. The effects of flexible materials, flexible parameters, and structural forms on the performance of the foot end have been discussed. Through simulation and experimentation, the parameter analysis and mechanical calibration of the foot end were completed, and a motion experiment of the flexible foot robot was designed. The simulation and experimental results showed that the flexible foot-end structure has uniform and reliable force and can effectively reduce the foot impact. Compared with the rigid foot, the foot-end force of the flexible foot was only 1/3 of the contact force, the peak foot pressure decreased by 59%, the motion stability increased by 37.4%, and the error of force perception was controlled at 11%. The flexible foot structure improved the stability of the robot motion process, reduced the vibration, provided the robot with good terrain adaptability, and achieved omnidirectional motion of the robot.

18 May 2020 in Sensors
Verified
Journal Article
Open access
PDF file
LZLei Zhang
Lei Zhang
FWFucai Wang
Fucai Wang
ZGZenghui Gao
Zenghui Gao
SGShuangshuang Gao
Shuangshuang Gao
CLChenghang Li
Chenghang Li
This paper proposes a smooth adjustment method for the instability problem that occurs during the start and stop of a multi-footed robot during attitude change. First, kinematics analysis is used to establish the mapping relationship between the joint angles of the robot support legs and the body posture. The leg joint angle is a known quantity that can be measured accurately and in real time. Therefore, when the position of the foot end of the support leg is unchanged, a unique set of joint angles can be obtained with the change of body posture at a certain moment. Based on the designed mapping model, the smooth adjustment of the posture can be achieved by the smooth adjustment of the support legs. Second, a constraint index that satisfies the requirements of the robot’s steady adjustment of the robot is given. The S-curve acceleration/deceleration method is used to plan the body’s attitude angle transformation curve, and then the mapping control relationship is used to obtain the control trajectory requirements of the joint to achieve smooth adjustment. In addition, this paper also gives a simple choice and motion control method for the redundancy problem caused by the number of support legs of a multi-footed robot when the attitude is changed. The simulation and prototype experiments verify and analyze the proposed method. The results of comparative experiments show that the posture adjustment method proposed in this paper has continuous acceleration without breakpoints, the speed changes gently during the start and stop phases of the attitude transformation, and there is no sudden change in the entire process, which improves the consistency of the actual values of the attitude planning curve with the target values. The physical prototype experiment shows that the maximum deviation between the actual value of the attitude angular velocity and the target value changes from 62.5% to 5.5%, and the degree of fit increases by 57.0%. Therefore, this study solves the problem of the instability of the fuselage when the robot changes its attitude, and it provides an important reference for the multi-footed robot to improve the terrain adaptability.

1 October 2006
Verified
Conference Paper
Closed access
LZLei Zhang
Lei Zhang
SMShugen Ma
Shugen Ma
KIKousuke Inoue
Kousuke Inoue
Several insights gained from observing quadruped robots in omnidirectional static walking experiments at high speed on a slope are presented here. In order to allow a robot to move as fast as possible, the height of center of gravity (COG) and three rotating axes, i.e., roll, pitch, and yaw, were used to discuss the COG with the corresponding optimal body posture (COBP). The COBP is the posture in which the motion velocity is maximized according to the height of COG, stability, degree of slope, and direction. Successive gait transition with a minimum number of steps is achievable with the use of a common foot position before and after a gait transition. The time required to change gaits may be reduced by designing the foot positions during crawling and rotating while limiting reachable region of the foot on a slope. The robot, thus, walks in any direction fast and statically with COBP by dynamically changing the height of COG and body posture during gait transitions

18 January 2006
Verified
Conference Paper
Closed access
LZLei Zhang
Lei Zhang
SMShugen Ma
Shugen Ma
KIK. Inoue
K. Inoue
YHY. Honda
Y. Honda
In this paper, we discuss the optimal body postures of a quadruped robot to perform omni-directional static walking on a slope. The optimal body posture is the posture with the maximum possible moving speed w. r. t. slope and moving direction. The proposed method based on dynamically changing body posture during gait-transitions, is used to maintain high robot motion velocity on slope. The timing of changing body posture is designed by considering the stability during gait-transition. Using the proposed method, the robot can walk into any direction with the fastest moving speed on a slope. Through walking experiments by computer simulation, the validity of the proposed method has been verified.

12 July 2023 in Sensors
Verified
Journal Article
Open access
PDF file
ZZZhongyuan Zhang
Zhongyuan Zhang
LZLei Zhang
Lei Zhang
MGMingjing Guan
Mingjing Guan
SZShuai Zhang
Shuai Zhang
TJTengfei Jiao
Tengfei Jiao
This study proposes a novel variable air pressure supply structure based on the electromagnetic effect. This structure can be implemented in various soft robots driven by air pressure, including pneumatic artificial muscles, pneumatic soft grippers, and other soft robots. The structure’s main body comprises a hollow circular tube, a magnetic piston arranged in the tube, and an electromagnetic solenoid nested outside the tube. The electromagnetic solenoid is designed with special winding and power supply access modes, generating either an attractive force or a repulsive force on the magnetic piston. This solenoid conforms with the magnetic piston expectation in the tube by changing the polarity direction. The interior of the whole structure is a closed space. The gas is conveyed to the soft robot by the gas guide hoses at the two ends of the structure, and the expansion energy of the compressed gas is fully utilized. Then, the gas supply pressure is controlled to drive the robot. The mathematical model of the structure is established based on the analysis of the electromagnetic force and gas pressure on the piston. The simulation results show that the structure’s inherent vibration characteristics under various parameters align with expectations. The real-time automatic optimization of the controller parameters is realized by optimizing the incremental proportional-integral-derivative (PID) controller based on a neural network. The simulation results show that the structure can meet the application requirements. The experimental results show that the proposed gas supply structure can provide a continuous pressure supply curve with any frequency in a specific amplitude range and has an excellent tracking effect on the sinusoidal-like pressure curve.

24 October 2005
Verified
Conference Paper
Open access
LZLei Zhang
Lei Zhang
SMShugen Ma
Shugen Ma
YHY. Honda
Y. Honda
KIK. Inoue
K. Inoue
In this study, we discuss omni-directional walking of a quadruped robot to walk on a slope. A method for successive gait-transition on a slope with specified body posture is introduced. Using this method, a trade-off between the moving speed and the body posture has been verified. Simulations and experiments showed that the proposed method for stable slope walking of a quadruped robot is valid