Repeat photogrammetry is increasingly the go-too tool for long-term geomorphic monitoring, but quantifying the differences between structure-from-motion (SfM) models is a developing field. Volumetric differencing software (such as the open-source package CloudCompare) provides an efficient mechanism for quantifying change in landscapes. In this case study, we apply this methodology to coastal boulder deposits on Inishmore, Ireland. Storm waves are known to move these rocks, but boulder transportation and evolution of the deposits are not well documented. We used two disparate SfM data sets for this analysis. The first model was built from imagery captured in 2015 using a GoPro Hero 3+ camera (fisheye lens) and the second used 2017 imagery from a DJI FC300X camera (standard digital single-lens reflex (DSLR) camera); and we used CloudCompare to measure the differences between them. This study produced two noteworthy findings: First, volumetric differencing reveals that short-term changes in boulder deposits can be larger than expected, and that frequent monitoring can reveal not only the scale but the complexities of boulder transport in this setting. This is a valuable addition to our growing understanding of coastal boulder deposits. Second, SfM models generated by different imaging hardware can be successfully compared at sub-decimeter resolution, even when one of the camera systems has substantial lens distortion. This means that older image sets, which might not otherwise be considered of appropriate quality for co-analysis with more recent data, should not be ignored as data sources in long-term monitoring studies.
Transverse aeolian ridges (TARs) are unusual bedforms on the surface of Mars. TARs are common but sparse on Mars; TAR fields are small, rarely continuous, and scattered, making manual mapping impractical. There have been many efforts to automatically classify the Martian surface, but they have never explicitly located TARs successfully. Here, we present a simple adaptation of the off-the-shelf neural network RetinaNet that is designed to identify the presence of TARs at a 50-m scale. Once trained, the network was able to identify TARs with high precision (92.9%). Our model also shows promising results for applications to other surficial features like ripples and polygonal terrain. In the future, we hope to apply this model more broadly and generate a large database of TAR distributions on Mars.
Data analysis methods have scarcely kept pace with the rapid increase in Earth observations, spurring the development of novel algorithms, storage methods, and computational techniques. For scientists interested in Mars, the problem is always the same: there is simultaneously never enough of the right data and an overwhelming amount of data in total. Finding sufficient data needles in a haystack to test a hypothesis requires hours of manual data screening, and more needles and hay are added constantly. To date, the vast majority of Martian research has been focused on either one-off local/regional studies or on hugely time-consuming manual global studies. Machine learning in its numerous forms can be helpful for future such work. Machine learning has the potential to help map and classify a large variety of both features and properties on the surface of Mars and to aid in the planning and execution of future missions. Here, we outline the current extent of machine learning as applied to Mars, summarize why machine learning should be an important tool for planetary geomorphology in particular, and suggest numerous research avenues and funding priorities for future efforts. We conclude that: (1) moving toward methods that require less human input (i.e., self- or semi-supervised) is an important paradigm shift for Martian applications, (2) new robust methods using generative adversarial networks to generate synthetic high-resolution digital terrain models represent an exciting new avenue for Martian geomorphologists, (3) more effort and money must be directed toward developing standardized datasets and benchmark tests, and (4) the community needs a large-scale, generalized, and programmatically accessible geographic information system (GIS).
1 January 2020 in Journal of Applied Remote Sensing
<!-- *** Custom HTML *** --> The objective of this study is to present a geographic information system based method for detecting and quantifying boulders (area, length, width, elevation, and transport distance) that couples image processing techniques with spatial analysis tools. This study focuses on a delta within Jezero Crater on Mars, the site of the upcoming Mars 2020 rover mission. Understanding the distribution of boulders and their properties is significant since they are critical for understanding surficial geology, sedimentology, and erosional/depositional processes on Mars. Additionally, boulders and large clasts pose a challenge to the traversability of terrain for both rovers and future human missions. A high-resolution imaging science experiment image of the Jezero delta was processed using a filtering/masking algorithm, which combines mean filtering, brightness interval masking, and range kernel filtering. User-determined conservative (no false-positive boulder pixels) and liberal (no false-negative pixels) brightness thresholds were used to generate boulder polygons and their minimum-bounding geometry. Using conservative parameters, 443,126 boulder-like features were identified, of which 153,582 (35%) were relevant boulders. For these boulders, the cumulative fractional area versus boulder width relationship flattens out as predicted in prior work, suggesting that approach is accurate, and further is simpler than existing approaches, and can identify boulders as small as 50 cm in diameter. The algorithm, which can be customized to various degrees of boulder rounding and works on images with different brightness and contrast levels and illumination angles, is applicable to boulder fields on Earth as well as Mars and other solar system bodies.
Morphological characteristics of cirques have been studied for decades; however, no repeatable set of metrics has been derived that can consistently identify them. Perhaps more importantly, there is no consensus definition of the form that distinguishes cirques and clusters of cirques from non-cirques. In our approach, we use Shuttle Radar Topography Mission (SRTM) digital elevation models (DEMs) in a Convolutional Neural Network (CNN) framework to identify cirques in 20 mountain ranges globally. We extracted bounding boxes of cirques in 19 of these study areas and used them to develop a training set for a cirque identification model. The trained model was applied to the Sierra Nevada California to assess whether this algorithmic approach derived from a global dataset could produce consistent results in complex terrain with mutually interacting cirque forms. Using commonalities revealed using this approach, we find that there is a basic, recognizable and morphometrically quantifiable cirque form. This approach can be used to automate the identification of cirque locations and to guide the quantification of cirque form independent of the subjective definitions of individual workers. The approach can also be used to understand cirque form under different environmental conditions, including similar forms on Mars.
Linear dunes and human fingerprints share many characteristics. Both have ridges, valleys, and defects (minutiae) in the form of bifurcations and termination of ridgeline features. For dunes, determining how defects vary across linear and transverse dunefields is critical to understanding the physics of their formative processes and the physical forcing mechanisms that produce dunefields. Unfortunately, manual extraction of defect locations and higher order characteristics (type, orientation, and quality) from remotely sensed imagery is both time-consuming and inconsistent. This problem is further exacerbated when, in the case of imagery from sensors in orbit around Mars, we are unable to field check interpretations. In this research, we apply a novel technique for extracting defects from multiple imagery sources utilizing a robust and well-documented fingerprint minutiae detection and extraction software (MINDTCT: MINutiae DecTeCTion) developed by the National Institute of Standards and Technology (NIST). We apply our ‘fingerprinting’ approach to Transverse Aeolian Ridges (TARs), relict aeolian features commonly seen on the surface of Mars, whose depositional and formative processes are poorly understood. Our algorithmic approach demonstrates that automating the rapid extraction of defects from orbitally-derived high-resolution imagery of Mars is feasible and produces maps that allow the quantification and analysis of these features.