Atmospheric turbulent circulations in the vicinity of wildland fire fronts play an important role in the transfer of momentum into and out of combustion zones, which in turn can potentially affect the behavior and spread of wildland fires. The vertical turbulent transfer of momentum is accomplished via individual sweep, ejection, outward interaction, and inward interaction events, collectively known as sweep-ejection dynamics. This study examined the sweep-ejection dynamics that occurred before, during, and after the passage of a surface fire front during a prescribed fire experiment conducted in an open-canopied forest in the New Jersey Pine Barrens. High-frequency (10 Hz), tower-based, sonic anemometer measurements of horizontal and vertical wind velocity components in the vicinity of the fire front were used to assess the relative frequencies of occurrence of the different types of momentum-flux events, their contributions to the overall momentum fluxes, and their periodicity patterns. The observational results suggest that the presence of surface fire fronts in open-canopied forests can substantially change the sweep-ejection dynamics that typically occur when fires are not present. In particular, sweep events resulting in the downward transport of high horizontal momentum air from above were found to be more prominent during fire-front-passage periods.

The impact of a forest canopy on smoke concentration is assessed by applying a numerical weather prediction model coupled with a Lagrangian particle dispersion model to two low-intensity wildland (prescribed) fires in the New Jersey Pine Barrens. A comparison with observations indicates that the coupled numerical model can reproduce some of the observed variations in surface smoke concentrations and plume heights. Model sensitivity analyses highlight the effect of the forest canopy on simulated meteorological conditions, smoke concentrations, and plume heights. The forest canopy decreases near-surface wind speed, increases buoyancy, and increases turbulent mixing. Sensitivities to the time of day, plant area density profiles, and fire heat fluxes are documented. Analyses of temporal variations in smoke concentrations indicate that the effect of the transition from a daytime to a nocturnal planetary boundary layer is weaker when sensible heat fluxes from the fires are stronger. The results illustrate the challenges in simulating meteorological conditions and smoke concentrations at scales where interactions between the fire, fuels, and atmosphere are critically important. The study demonstrates the potential for predictive tools to be developed and implemented that could help fire and air-quality managers assess local air-quality impacts during low-intensity wildland fires in forested environments.

Coupled fire-atmosphere models are simulators that integrate a fire component and an atmospheric component, with the objective of capturing interactions between the fire and atmosphere. As a fire releases energy in the combustion process, the surrounding atmosphere adjusts in response to the energy fluxes; coupled fire-atmosphere (CFA) models aim to resolve the processes through which these adjustments occur. Several CFA models have been developed internationally, mostly by meteorological institutions and primarily for use as a research tool. Research studies have provided valuable insights into some of the atmospheric processes surrounding a fire. The potential to run CFA models in real time is currently limited due to the intensive computational requirements. In addition, there is a need for systematic verification to establish their accuracy and the appropriate circumstances for their use. The Bureau of Meteorology (the Bureau) is responsible for providing relevant and accurate meteorological information to Australian fire agencies to inform decisions for the protection of life and property and to support hazard management activities. The inclusion of temporally and spatially detailed meteorological fields that adjust in response to the energy released by a fire is seen as a component in developing fire prediction systems that capture some of the most impactful fire and weather behavior. The Bureau’s ten-year research and development plan includes a commitment to developing CFA models, with the objective of providing enhanced services to Australian fire agencies. This paper discusses the operational use of fire predictions and simulators, learnings from CFA models and potential future directions for the Bureau in using CFA models to support fire prediction activities.

The ventilation index (VI) is an index that describes the potential for smoke or other pollutants to disperse from a source. In this study, a Lagrangian particle dispersion model was utilized to examine smoke dispersion and the diagnostic value of VI during a September 2018 prescribed fire in southwestern Colorado. Smoke dispersion in the vicinity of the fire was simulated using the FLEXPART-WRF particle dispersion model, driven by meteorological outputs from Advanced Regional Prediction System (ARPS) simulations of the background (non-fire) conditions. Two research questions are posed: (1) Is a horizontal grid spacing of 4 km comparable to the finest grid spacing currently used in operational weather models and sufficient to capture the spatiotemporal variability in wind and planetary boundary layer (PBL) structure during the fire? (2) What is the relationship between VI and smoke dispersion during the prescribed fire event, as measured by particle residence time within a given horizontal or vertical distance from each particle’s release point? The ARPS no-fire simulations are shown to generally reproduce the observed variability in weather variables, with greatest fidelity to observations found with horizontal grid spacing of approximately 1 km or less. It is noted that there are considerable differences in particle residence time (i.e., dispersion) at different elevations, with VI exhibiting greater diagnostic value in the southern half of the domain, farthest from the higher terrain across the north. VI diagnostic value is also found to vary temporally, with diagnostic value greatest during the mid-morning to mid-afternoon period, and lowest during thunderstorm outflow passage in the late afternoon. Results from this study are expected to help guide the application of VI in complex terrain, and possibly inform development of new dispersion potential metrics.

Prescribed burning is a cost-effective method for reducing hazardous fuels in pine- and oak-dominated forests, but smoke emissions contribute to atmospheric pollutant loads, and the potential exists for exceeding federal air quality standards designed to protect human health. Fire behavior during prescribed burns influences above-canopy sensible heat flux and turbulent kinetic energy (TKE) in buoyant plumes, affecting the lofting and dispersion of smoke. A more comprehensive understanding of how enhanced energy fluxes and turbulence are related during the passage of flame fronts could improve efforts to mitigate the impacts of smoke emissions. Pre- and post-fire fuel loading measurements taken during 48 operational prescribed burns were used to estimate the combustion completeness factors (CC) and emissions of fine particulates (PM_2.5), carbon dioxide (CO₂), and carbon monoxide (CO) in pine- and oak-dominated stands in the Pinelands National Reserve of southern New Jersey. During 11 of the prescribed burns, sensible heat flux and turbulence statistics were measured by tower networks above the forest canopy. Fire behavior when fire fronts passed the towers ranged from low-intensity backing fires to high-intensity head fires with some crown torching. Consumption of forest-floor and understory vegetation was a near-linear function of pre-burn loading, and combustion of fine litter on the forest floor was the predominant source of emissions, even during head fires with some crowning activity. Tower measurements indicated that above-canopy sensible heat flux and TKE calculated at 1 min intervals during the passage of fire fronts were strongly influenced by fire behavior. Low-intensity backing fires, regardless of forest type, had weaker enhancement of above-canopy air temperature, vertical and horizontal wind velocities, sensible heat fluxes, and TKE compared to higher-intensity head and flanking fires. Sensible heat flux and TKE in buoyant plumes were unrelated during low-intensity burns but more tightly coupled during higher-intensity burns. The weak coupling during low-intensity backing fires resulted in reduced rates of smoke transport and dispersion, and likely in more prolonged periods of elevated surface concentrations. This research facilitates more accurate estimates of PM_2.5, CO, and CO₂ emissions from prescribed burns in the Pinelands, and it provides a better understanding of the relationships among fire behavior, sensible heat fluxes and turbulence, and smoke dispersion in pine- and oak-dominated forests.

The ambient atmospheric environment affects the growth and spread of wildland fires, whereas heat and moisture release from the fires and the reduction of the surface drag in the burned areas can significantly alter local atmospheric conditions. Observational studies on fire-atmosphere interactions have used instrumented towers to collect data during prescribed fires, but a few towers in an operational scale burn plot (usually > 10³ m²) have made it extremely challenging to capture the myriad of factors controlling fire-atmosphere interactions, many of which exhibit strong spatial variability. Here, we present analyses of atmospheric turbulence data collected using a 4×4 array of fast-response sonic anemometers during a fire experiment on a 10 m × 10 m burn plot. In addition to confirming some of the previous findings on atmospheric turbulence associated with low-intensity surface fires, our results revealed substantial heterogeneity in turbulent intensity and heat and momentum fluxes just above the combustion zone. Despite the small plot (100 m²), fire-induced atmospheric turbulence exhibited strong dependence on the downwind distance from the initial line fire and the relative position specific to the fire front as the surface fire spread through the burn plot. This result highlights the necessity for coupled atmosphere-fire behavior models to have 1–2 m grid spacing to resolve heterogeneities in fire-atmosphere interactions that operate on spatiotemporal scales relevant to atmospheric turbulence. The findings here have important implications for modeling smoke dispersion, as atmospheric dispersion characteristics in the vicinity of a wildland fire are directly affected by fire-induced turbulence.