Cellulose is a biopolymer that may be derived from a variety of agricultural wastes such as rice husks, wheat straw, banana, and so on. Cellulose fibril that is reduced in size, often known as nanocellulose (NC), is a bio-based polymer with nanometer-scale widths with a variety of unique properties. The use of NC as a reinforcing material for nanocomposites has become a popular research issue. This research paper focuses on the production of banana pseudostem cellulose nanofiber. Nano-sized fiber was obtained from banana pseudostem through several processes, namely, grinding, sieving, pre-treatment, bleaching, and acid hydrolysis. The product yield was found to be 40.5% and 21.8% for Musa acuminata and Musa balbisiana, respectively, by the weight of the raw fiber. The reduction in weight was due to the removal of hemicellulose and lignin during processing. Transmission electron microscopy (TEM) analysis showed that the average fiber size decreased from 180 µm to 80.3 ± 21.3 nm. Finally, FTIR analysis showed that the fibers experienced chemical changes after the treatment processes.

Fluctuation in fossil fuel prices and the increasing awareness of environmental degradation have prompted the search for alternatives from renewable energy sources. Biodiesel is the most efficient alternative to fossil fuel substitution because it can be properly modified for current diesel engines. It is a vegetable oil-based fuel with similar properties to petroleum diesel. Generally, biodiesel is a non-toxic, biodegradable, and highly efficient alternative for fossil fuel substitution. In Malaysia, oil palm is considered as the most valuable commodity crop and gives a high economic return to the country. However, the ethical challenge of food or fuel makes palm oil not an ideal feedstock for biodiesel production. Therefore, attention is shifted to non-edible feedstock like Jatropha curcas Linnaeus (Jatropha curcas L.). It is an inedible oil-bearing crop that can be processed into biodiesel. It has a high-seed yield that could be continually produced for up to 50 years. Furthermore, its utilization will have zero impact on food sources since the oil is poisonous for human and animal consumption. However, Jatropha biodiesel is still in its preliminary phase compared to palm oil-based biodiesel in Malaysia due to a lack of research and development. Therefore, this paper emphasizes the potential of Jatropha curcas as an eco-friendly biodiesel feedstock to promote socio-economic development and meet significantly growing energy demands even though the challenges for its implementation as a national biodiesel program might be longer.

The presence of glyceryl esters (GE) and 3-monochloropropane-1,2-diol esters (3-MCPDE) in refined, bleached, and deodorized (RBD) palm oil is severely concerning to the palm oil consumer. In the present study, the influence of the phosphoric acid degumming process on the formation of GE and 3-MCDE and in the RBD palm oil was determined with varying the acid dose (0.03–0.06 wt%), temperature (70–100 °C), and reaction time (15–45 min). The experimental conditions of the acid degumming process were designed following the central composite design of experiments, and they were optimized using Response Surface Methodology (RSM) based on the minimal formation of GE and 3-MCDE in the RBD palm oil. The optimal experimental conditions of the acid degumming process were a reaction time of 30 min, phosphoric acid concentration of 0.06 wt%, and temperature of 90 °C. Under these experimental conditions, the minimal GE and 3-MCDE formation in RBD palm oil were determined to be 0.61 mg/kg and 0.59 mg/kg; respectively. Several analytical methods were employed to determine RBD palm oil quality, including color, phosphorus, free fatty acids (FFAs), peroxide values, and fatty acid properties. It was found that the phosphoric acid degumming of CPO effectively removed the phosphorus and hydroperoxide content without conceding the quality of palm oil.

Malaysia is one of the fastest emerging and developing countries in the world. To drive the economical workhorse, large amounts of power is required. The power demand has risen to 156,003 GWh per year in the year 2016, almost 30,000 GWh more than 5 years prior. Fossil fuels such as natural gas, coal, oil, and diesel have been the driving force powering Malaysia’s grids. However, these resources will not last forever, and they do harm to our environment. To counter this, renewable energy (RE) projects have been constructed all around Malaysia. This paper discusses on available and existing renewable energy systems (single/hybrid) in Malaysia and provides a comparison of their electricity generation capabilities. The renewable energy sources that are covered in this paper include Solar, Hydropower, Biomass, Tidal and Geothermal. At the moment, hydropower is the largest renewable energy producer, contributing to almost 15% of the country’s total energy generation. A lot of resources have been channeled towards the initiative of hydropower and it has definitely borne much fruit. This is followed by Solar Energy. Even though it is not as successful as hydropower, there is still a lot of avenues for it to grow in a tropical country like this. Malaysia is still relatively new in terms of power generation using biomass sources. There has been a gradual increase in the power generation using biofuels through the years and its future does look bright. Energy generation from wind, tidal, and geothermal sources has been rather challenging. Because of Malaysia’s geographical location, it experiences slow winds on average throughout the year. This has led to insufficient output for its financial input. Besides that, Malaysia also has relatively low tide, if compared to other Asian countries such as Indonesia and the Philippines. This contributed to the failure of tidal energy in Malaysia, but there have been signs of locations that can be suitable for this energy generation. Besides that, the country’s first geothermal power plant project failed due to a lack of preparation and discipline during the project’s execution. There is a high initial cost for geothermal projects, and the chances of failure are high if the necessary precautions are not followed. This could be one of the reasons why this branch of renewable energy has not been explored deeply.