We report the flexible piezotronic strain sensors fabricated using carbon fiber–ZnO nanowire hybrid structures by a novel and reliable method. The I–V characteristic of the sensor shows high sensitivity to external strain due to the change in Schottky barrier height (SBH), which has a linear relationship with strain. This fabricated strain sensor has a quick, real-time current response under both static and dynamic mechanical loads. The change in SBH resulted from the strain-induced piezoelectric potential is investigated by band gap theory. In this work we develop a new feasible method to fabricate a flexible strain sensor within the fabric adapted to textile structures, able to measure their strain.

A major reason to conduct solidification experiments in space is that the unique conditions accessible in reduced-gravity allow investigation of fundamental questions while limiting the influence of sedimentation or buoyancy-induced convection. When processing metallic alloys using containerless electromagnetic levitation, convection may be controlled over a wide range, spanning the laminar-turbulent transition, by proper selection of facility operating conditions. By measuring key thermophysical properties such as density, viscosity, and electrical resistivity on-orbit, the specific sample being processed may be characterized and the results used to update pre-mission magnetohydrodynamic model predictions of induced stirring within the droplet. Thus, convection becomes a controlled experimental parameter that can be applied to an investigation of how stirring influences the metastable-to-stable transformation during rapid solidification of FeCrNi alloys. For these alloys, the incubation or delay time is observed to be a weak function of undercooling and a strong function of applied convection.

A new noncontact calorimetric method has been developed based on inductive heating of a metallic spherical bulk sample by a power-modulated radio-frequency field under ultrahigh vacuum conditions. From the pyrometrically measured temperature response the specimen’s external (due to radiative heat loss) and internal relaxation time (due to thermal conductivity) are found to differ by more than two orders of magnitude allowing the specific heat as well as thermal conductivity of the sample to be determined as a function of temperature. The agreement between the measured and predicted temperature response for solid Nb demonstrates the applicability and accuracy of the method which is particularly useful for metastable or chemically reactive samples at high temperature.

Transitions from the liquid to the solid state of matter are omnipresent. They form a crucial step in the industrial solidification of metallic alloy melts and are greatly influenced by the thermophysical properties of the melt. Knowledge of the thermophysical properties of liquid metallic alloys is necessary in order to gain a tight control over the solidification pathway, and over the obtained material structure of the solid. Measurements of thermophysical properties on ground are often difficult, or even impossible, since liquids are strongly influenced by earth’s gravity. Another problem is the reactivity of melts with container materials, especially at high temperature. Finally, deep undercooling, necessary to understand nucleus formation and equilibrium as well as non-equilibrium solidification, can only be achieved in a containerless environment. Containerless experiments in microgravity allow precise benchmark measurements of thermophysical properties. The electromagnetic levitator ISS-EML on the International Space Station (ISS) offers perfect conditions for such experiments. This way, data for process simulations is obtained, and a deeper understanding of nucleation, crystal growth, microstructural evolution, and other details of the transformation from liquid to solid can be gained. Here, we address the scientific questions in detail, show highlights of recent achievements, and give an outlook on future work.

We report on the anelastic behavior of a cyclically loaded Zr_62.5Fe₅Cu_22.5Al₁₀ bulk metallic glass well below its yield strength. The dynamic mechanical behavior of the glass is discussed on the basis of its structural and thermodynamic properties before and after tests. We show how the kinetically frozen anelastic deformation accumulates at room temperature and causes a structural relaxation and densification of the glass and further leads to its partial crystallization.