The emergence of the aerospace sector requires efficient joining of aerospace grade aluminium alloys. For large-scale industrial practices, achievement of optimum friction stir welding (FSW) parameters is chiefly aimed at obtaining maximum strain rate in deforming material with least application of traverse force on the tool pin. Exact computation of strain rate is not possible due to complex and unexposed material flow kinematics. Estimation using micro-structural evolution serves as one of the very few methods applicable to analyze the yet unmapped interdependence of strain rate and traverse force. Therefore, the present work assessed strain rate in the stir zone using Zener Holloman parameter. The maximum and minimum strain rates of 6.95 and 0.31 s−1 were obtained for highest and least traverse force, respectively.
The restoration of numerous aircraft structures is achievable with effective repair of welded joints. T-joints are often utilized in these structures to provide structural stability, keeping minimal body weight. Multi-pass friction stir welding (FSW) has proved to be useful for improving the quality of aluminium alloy welds employed in the aerospace sector. However, FSW of these alloys in T-configuration has not been sufficiently addressed yet. Even rarer is the discussion of efficacy of second FSW pass, with altered process parameters for improving the weld quality in T-joints. Hence, two commonly used aerospace grade aluminium alloys, namely, AA2024 and AA7075, were friction stir welded in T-configuration, varying three process parameters, i.e., tool rotational speed, welding speed and shoulder diameter. The effect of second FSW pass, performed at an optimum set of parameters, on kissing bond and tunnelling defect was studied in detail. A substantial reduction in the detrimental effect of these weld defects was discussed via tensile testing, micro-hardness and micro-structural observations.
1 November 2024 in Materials Science and Engineering: A
Aluminium alloys exhibiting properties such as high strength to weight ratio, high corrosion resistance etc. has made them a choice for many industrial applications. Therefore, joining of aluminium alloys is of utmost importance, especially for the aerospace industry. Friction stir welding (FSW), a clean novel solid-state joining process, is being used to effectively join dissimilar materials for making different parts of space shuttles, aircrafts etc. 2.5 mm thick dissimilar aluminium alloys, AA2219-O and AA7475-T761, were joined using FSW. Evolution of microstructure for the traverse cross section of welded joint was studied. As a result, significant refinement of grains was observed in stir zone along with dissolution and coagulation of strengthening precipitates due to high rise in temperature and severe plastic deformation. Partial recrystallization was observed in TMAZ along with coarsening of grains and strengthening precipitates. In HAZ, coarser grains and strengthening precipitates was observed with no extent of plastic deformation.