Zahid A. Khan

Dr. Zahid A. Khan


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2016 in Archive of Mechanical Engineering
Verified
Journal Article
Open access
PDF file
MWMohd Atif Wahid
Mohd Atif Wahid
ASArshad Noor Siddiquee
Arshad Noor Siddiquee
ZKZahid A. Khan
Zahid A. Khan
MAMohammad Asjad
Mohammad Asjad
In the present study, butt joints of aluminum (Al) 8011-H18 and pure copper (Cu) were produced by friction stir welding (FSW) and the effect of plunge depth on surface morphology, microstructure and mechanical properties were investigated. The welds were produced by varying the plunge depth in a range from 0.1 mm to 0.25 mm. The defect-free joints were obtained when the Cu plate was fixed at the advancing side. It was found that less plunging depth gives better tensile properties compare to higher plunging depth because at higher plunging depth local thinning occurs at the welded region. Good tensile properties were achieved at plunge depth of 0.2 mm and the tensile strength was found to be higher than the strength of the Al (weaker of the two base metals). Microstructure study revealed that the metal close to copper side in the Nugget Zone (NZ) possessed lamellar alternating structure. However, mixed structure of Cu and Al existed in the aluminum side of NZ. Higher microhardness values were witnessed at the joint interfaces resulting from plastic deformation and the presence of intermetallics.

20 May 2019 in Materials
Verified
Journal Article
Open access
PDF file
NKNoor Khan
Noor Khan
DBDhruv Bajaj
Dhruv Bajaj
ASArshad Noor Siddiquee
Arshad Noor Siddiquee
ZKZahid A. Khan
Zahid A. Khan
Mustufa Haider AbidiMustufa Haider Abidi
Mustufa Haider Abidi
HAHisham Alkhalefah
Hisham Alkhalefah
The emergence of the aerospace sector requires efficient joining of aerospace grade aluminium alloys. For large-scale industrial practices, achievement of optimum friction stir welding (FSW) parameters is chiefly aimed at obtaining maximum strain rate in deforming material with least application of traverse force on the tool pin. Exact computation of strain rate is not possible due to complex and unexposed material flow kinematics. Estimation using micro-structural evolution serves as one of the very few methods applicable to analyze the yet unmapped interdependence of strain rate and traverse force. Therefore, the present work assessed strain rate in the stir zone using Zener Holloman parameter. The maximum and minimum strain rates of 6.95 and 0.31 s−1 were obtained for highest and least traverse force, respectively.

28 November 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
GSGajender Sharma
Gajender Sharma
SAShafi Ahmad
Shafi Ahmad
ZMZ. Mallick
Z. Mallick
ZKZahid A. Khan
Zahid A. Khan
Ajith Tom JamesAjith Tom James
Ajith Tom James
NANandalur Ameer Ahammad
Nandalur Ameer Ahammad
Professional driving involves sitting in uncomfortable positions, navigating difficult terrain and roads, and occasionally conducting small repairs and other auxiliary transportation duties while at work for long periods. Drivers who engage in these activities may develop a variety of musculoskeletal disorders (MSDs). MSDs in professional drivers are accompanied by several risk factors. In this study, the various risk factors for MSD have been identified through the literature reviews, discussions with professional drivers, and consultations with ergonomics specialists. This study employed the ordinal priority approach (OPA), a multi-criteria decision-making (MCDM) technique, to rank the identified risk variables for MSD in order of importance. The same OPA method has also been used to identify the group of professional drivers who use eight different types of vehicles and are more likely to develop MSDs. The analyses findings show that the five main risk factors for MSDs among drivers are prolonged sitting, restricted posture, working hours, alcohol consumption, and uncomfortable seating. Additionally, among all drivers regarded as professionals, truck drivers are found to be the most at risk. For the study’s conclusions to be validated, a sensitivity analysis was also carried out. The results of this study are anticipated to help formulate strategies for lowering these hazards through the ergonomic design of drivers’ cabins by automobile OEMs (Original Equipment Manufacturers) and vehicle scheduling by concerned transportation organizations to reduce driver tiredness.

14 September 2019 in Mathematics
Verified
Journal Article
Open access
PDF file
SISheikh Imran Ishrat
Sheikh Imran Ishrat
ZKZahid A. Khan
Zahid A. Khan
ASArshad Noor Siddiquee
Arshad Noor Siddiquee
IMIrfan Magami
Irfan Magami
AAAli Algahtani
Ali Algahtani
RGRajan Gupta
Rajan Gupta
Expanded polystyrene (EPS) is used in the building and construction industry for insulation and under flooring purposes. The objective of the study is to investigate the impact of the application of the total quality management (TQM) technique on the significant parameters of the pod production process in a New Zealand based EPS manufacturing facility. In this work, Taguchi’s L27 orthogonal array (OA) is considered for conducting experiments through three input parameters i.e., weight of untreated beads, batch duration, and temperature is investigated. Based on the results, the analyses are carried out while using statistical approaches, such as analysis of the means (ANOM) and analysis of variance (ANOVA). The results from confirmatory experiment indicate that, at optimal parameters setting (17 kg of untreated bead, 130 s of batch duration and 155 °F of temperature), a reasonably streamlined pod manufacturing process can be achieved for sustainable operations.

22 August 2025 in Engineering Headway
Verified
Conference Paper
Closed access
PDF file
AGAmit Gautam
Amit Gautam
ZKZahid A. Khan
Zahid A. Khan
AGAbdul Gani
Abdul Gani
MAMohammad Asjad
Mohammad Asjad
The study emphasizes the interconnectedness of a healthy economy, equitable societies, environmental well-being, and the path towards sustainable development. While current sustainability assessments acknowledge ecological, social, and economic factors, they frequently miss the mark on space pollution and its related metrics. Space sustainability, envisioned as the peaceful and equitable access to and utilization of outer space, and is portrayed as a multi-faceted concept requiring consideration of various aspects to ensure responsible space conduct. Specifically, space debris in Earth's orbit poses a formidable challenge to achieving sustainable space activities, yet this critical dimension continues to be understudied within the broader sustainability framework. The study aims to fill this research gap by identifying Key Performance Indicators (KPIs) for evaluating product sustainability, emphasizing a comprehensive understanding across terrestrial and extraterrestrial dimensions. It advocates for integrating space-related factors into sustainability assessments, emphasizing the need for a holistic approach that spans both Earth's immediate environment and the broader universe. The proposed space-related KPIs aim to address unique challenges and opportunities associated with space activities. This study pushes the boundaries of sustainability, calling for a comprehensive approach that connects earthly principles with the vast reality of space. It emphasizes the need for responsible practices both on Earth and in orbit, highlighting the growing risks associated with space debris and advocating for effective space management strategies. For businesses, the study signifies a paradigm shift – challenging them to consider the impact of their activities on space sustainability by integrating the 'Dimension of Space' and its associated indicators into their sustainability frameworks. This holistic approach is critical for cultivating responsible space practices, ensuring the long-term viability of space exploration, and safeguarding our shared orbital commons for future generations. Keywords: Space Industry, Sustainable Practices, Space Product Eco-labeling and Certification, Mitigation Strategies, Pollution Reduction, Resource Recovery and Recycling.

16 September 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
VTVisnu Kumar Tiwari
Visnu Kumar Tiwari
ZKZahid A. Khan
Zahid A. Khan
NGNamrata Gangil
Namrata Gangil
Faseeulla Khan MohammadFaseeulla Khan Mohammad
Faseeulla Khan Mohammad
MHMonaf MADHAT Hodhod
Monaf MADHAT Hodhod
ASArshad Noor Siddiquee
Arshad Noor Siddiquee
Silicon nitride (Si3N4) is a critical advanced ceramic used in high-performance applications, but its inherent hardness and brittleness make it difficult to machine. Conventional methods like rotary ultrasonic machining (RUM) often result in subsurface damage and limited efficiency. This paper introduces a novel process, chemically-assisted rotary ultrasonic workpiece machining (CRUWM), designed to overcome these challenges. The key innovation lies in imparting ultrasonic vibrations directly to the workpiece while using methanol as a chemically-active fluid. This configuration leverages the Rehbinder effect to induce an absorption-induced reduction in the material's strength at the machining interface, transitioning the material removal mechanism from pure brittle fracture to a more favourable ductile-brittle hybrid mode. The results demonstrate the superiority of the CRUWM process over conventional RUM. We achieved a 75.9% reduction in hole taper angle, a 34.3% decrease in surface roughness (Ra), a 29.9% reduction in cutting forces, and a remarkable 92.9% increase in the material removal rate (MRR). These findings present a cost-effective and highly efficient pathway for precision machining of silicon nitride and other hard-to-machine ceramics.