As the most promising material for thin-film solar cells nowadays, perovskite shine for its unique optical and electronic properties. Perovskite-based solar cells have already been demonstrated with high efficiencies. However, it is still very challenging to optimize the morphology of perovskite film. In this paper we proposed a smooth and continuous perovskite active layer by treating the poly (3, 4-ethylenedioxythiophene): poly (styrenesulphonate) (PEDOT:PSS) with pre-perovskite deposition and dimethylsulfoxide (DMSO) rinse. The scanning electron microscope (SEM) and atomic force microscope (AFM) images confirmed a perovskite active layer consisting of large crystal grains with less grain boundary area and enhanced crystallinity. The perovskite devices fabricated by this method feature a high power conversion efficiency (PCE) of 11.36% and a short-circuit current (Jsc) of 21.9 mA·cm−2.
In this paper, NiSb/NiTe/Ni composites were smoothly developed via the microwave method for supercapacitors. The synthesis of NiSb/NiTe crystals was revealed by X-ray photoelectron spectroscopy and X-ray diffraction. The analytic results of scanning electron microscopy and energy dispersive spectroscopy uncover the microscopic morphology as well as the constituent elements of the composites. Self-supported NiSb/NiTe is a supercapacitor cathode that combines high capacitance with excellent cycling stability. The obtained composite electrode displayed remarkable electrochemical properties, presenting a special capacitance of 1870 F g-1 (1 A g-1) and 81.5% of the original capacity through 30,000 times (10 A g-1) of the charging/discharging process. Further, an asymmetric supercapacitor was prepared employing NiSb/NiTe as a cathode and activated carbon as an anode. NiSb/NiTe//AC exhibited a high energy density of 224.6 uW h cm-2 with a power density of 750 μW cm-2 and provided a favorable cycling stability of 83% after 10,000 cycles.
To investigate the fluorination influence on the photovoltaic performance of small molecular based organic solar cells (OSCs), six small molecules based on 2,1,3-benzothiadiazole (BT), and diketopyrrolopyrrole (DPP) as core and fluorinated phenyl (DFP) and triphenyl amine (TPA) as different terminal units (DFP-BT-DFP, DFP-BT-TPA, TPA-BT-TPA, DFP-DPP-DFP, DFP-DPP-TPA, and TPA-DPP-TPA) were synthesized. With one or two fluorinated phenyl as the end group(s), HOMO level of BT and DPP based small molecular donors were gradually decreased, inducing high open circuit voltage for fluorinated phenyl based OSCs. DFP-BT-TPA and DFP-DPP-TPA based blend films both displayed stronger nano-scale aggregation in comparison to TPA-BT-TPA and TPA-DPP-TPA, respectively, which would also lead to higher hole motilities in devices. Ultimately, improved power conversion efficiency (PCE) of 2.17% and 1.22% was acquired for DFP-BT-TPA and DFP-DPP-TPA based devices, respectively. These results demonstrated that the nano-scale aggregation size of small molecules in photovoltaic devices could be significantly enhanced by introducing a fluorine atom at the donor unit of small molecules, which will provide understanding about the relationship of chemical structure and nano-scale phase separation in OSCs.
This paper investigated the preparation of NiSb/NiSe nanomaterials using a microwave method and explored their electrochemical properties and potential applications in supercapacitors. The NiSb/NiSe nanomaterials were synthesized on nickel foam using microwave radiation, resulting in uniformly distributed flower-like nanostructures. This structure not only provided abundant electrochemical reaction sites, but also improved the electrical conductivity and ion diffusion, contributing to the overall performance of supercapacitors. Electrochemical tests showed that the NiSb/NiSe material exhibited a high specific capacity of 525 mAh g−1 at 1 A g⁻1 and maintained 65% capacity after 8000 cycles, demonstrating excellent cycling stability and battery-type charge storage capability. In addition, a hybrid supercapacitor assembled using NiSb/NiSe as the anode material and activated carbon (AC) as the cathode material achieved an energy density of 100.34 Wh kg−1 at a power density of 774.9 W kg−1, significantly enhancing energy storage efficiency. The effect of different microwave powers and reaction times on the morphology and electrochemical properties of the materials were further investigated, with the optimal preparation conditions found to be 800 W and 150 s. The NiSb/NiSe materials synthesized under this condition not only have the best electrochemical properties, but also exhibit low charge transfer impedance and excellent electrical conductivity. In summary, NiSb/NiSe flower-like nanomaterials as supercapacitor electrode materials demonstrate great potential for energy storage applications due to their high specific capacity, good cycling stability and high energy density.
In this paper, platinum nanoparticles with a size of less than 50 nm were rapidly and successfully synthesized in low-temperature molten salt using a microwave method. The morphology and structure of the product were characterized by SEM, TEM, EDX, XRD, etc. The TEM and SEM results showed that the prepared product was a nanostructure with concave and uniform size. The EDX result indicated that the product was pure Pt, and the XRD pattern showed that the diffraction peaks of the product were consistent with the standard spectrum of platinum. The obtained Pt/C nanoparticles exhibited remarkable electrochemical performance in a formic acid catalytic oxidation reaction (FAOR), with a peak mass current density of 502.00 mA·mg−1Pt and primarily following the direct catalytic oxidation pathway. In addition, in the chronoamperometry test, after 24 h, the mass-specific activity value of the Pt concave NPs/C catalyst (10.91 mA·mg−1Pt) was approximately 4.5 times that of Pt/C (JM) (2.35 mA·mg−1Pt). The Pt/C NPs exhibited much higher formic acid catalytic activity and stability than commercial Pt/C. The microwave method can be extended to the preparation of platinum-based alloys as well as other catalysts.