The proposed work aims at exploring and developing new strategies to extend mission parameters (measured as travel distance and mission duration (MD)) of a new class of unmanned vehicles, named Micro Air Vehicles (MAVs). In this paper, a new analytical model, identifying all factors, which determine the MAV power consumption, is presented. Starting from the new model, the design of a nanoarray energy harvester, based on plasmonics nano-antenna technology is proposed. The preliminary study was based on a 22,066,058 22,066,058 × 62,800-dipole rectenna array producing an output power level of 84.14 mW, and an energy value of 2572 J under a power density of 100 mW/cm² and a resonant frequency of 350 THz as input conditions. The preliminary analytical results show a possible recharge of an ultra-fast rechargeable battery on board of a MAV and an MD improvement of 16.30 min.
Schottky diode (SD) has seen great improvements in the past few decades and, for many THz applications, it is the most useful device. However, the use and recycling of forms of energy such as solar energy and the infrared thermal radiation that the Earth continuously emits represent one of the most relevant and critical issues for this diode, which is unable to rectify signals above 5 THz. The goal is to develop highly efficient diodes capable of converting radiation from IR spectra to visible ones in direct current (DC). A set of performance criteria is investigated to select some of the most prominent materials required for developing innovative types of electrodes, but also a wide variety of insulator layers is required for the rectification process, which can affect the performance of the device. The current rectifying devices are here reviewed according to the defined performance criteria. The main aim of this review is to provide a wide overview of recent research progress, specific issues, performance, and future directions in THz rectifier technology based on quantum mechanical tunneling and asymmetric structure.
Very high-power and high-efficiency microwave applications require waveguide structures to combine/divide the power from/to a variable number of high-power solid-state devices. In the literature, among the different waveguide configurations, those capable of providing the maximum output power show a limited relative bandwidth. To overcome this limitation, in this paper a full-band (40%) waveguide power divider/combiner specifically designed for high-power applications (up to several kW) is presented. The proposed structure uses an evolved turnstile junction with a standard rectangular waveguide common port, rotated 45°, with respect to its central axis, to divide/combine the signal to/from the four output/input rectangular ports. The inclusion of an oversized central cavity together with circular and rectangular waveguide impedance transformers at the common port allows the achievement of a full-band operation with excellent electrical performance, while maintaining a very simple and compact configuration. Only two layers of metal are required for the physical implementation of this structure in platelet configuration. A prototype has been designed covering the full Ka-band (26.5–40 GHz), showing an excellent measured performance with around 30 dB of return loss, 0.18 dB of insertion loss, and less than 1.5° of phase imbalance.
1 June 2015 in Journal of Microwaves, Optoelectronics and Electromagnetic Applications
This paper proposes a new topology of a 2-Stages Active Polyphase Filter (APPF) in MMIC GaAs technology. This new topology, named “radial”, allows a greater balancing of output signals phases and amplitudes, over the actual APPF’s at the state of the art. In this paper an ex-novo study is shown and synthesis formulas for the APPF are provided. The MMIC simulations in 1-5GHz bandwidth show a tunable Image Rejection Ratio (IRR) greater than 40dB, a worst case input/output matching of 7.8dB and a maximum insertion loss of 10.8dB. By comparison with the tandem topology, as will be shown in the following, the radial one allows a significant improvement in the electrical performances.