In this paper, new insights in the near infrared imaging process used in finger‐vein recognition by developing a physical model are presented. A realistic phantom finger that mimics the living human finger and also includes veins has been developed to validate this model. NIR phantom finger images show that the phantom can emulate the optical properties of a living human finger and can provide ground truth for the locations of the veins. Through physical modeling, it is particularly learned that—besides blood and soft tissue—bone also plays an important role in generating reliable NIR finger‐vein images.
Systems for atmospheric research and wireless communication use the High Frequency (HF) radio spectrum. At these frequencies, typically up to 20 MHz, the ambient electromagnetic noise is stronger than the noise generated by the receiver itself, thereby limiting the sensitivity of the instruments. Especially in urban areas, the noise level is high. In remote rural environments, where artificial noise sources are absent, a much lower noise level is observed. It has been shown that this noise arrives via ionospheric propagation and consists of impulsive noise from lightning and a background component that resembles additive white Gaussian noise. To establish the absolute field strength of this background noise component, a direction- and polarization-agnostic antenna is realized by adding the power of two orthogonal antenna elements in the digital domain. To suppress radio signals arriving via ionospheric propagation—of which the spectral and temporal aspects are not known a priori—a novel adaptive filter is demonstrated that separates the background noise from the radio signals in the joint frequency-time domain. This method is demonstrated using measurements from a polarimetric experiment on 7 MHz in a remote rural area in Catalonia. The results are submitted to the International Telecommunication Union for the validation of ambient noise models.
This article describes the design and validation of deployable low-power probes and sensors to investigate the influence of the ionosphere and the Earth’s magnetic field on radio wave propagation below the plasma frequency of the ionosphere, known as Near Vertical Incidence Skywave (NVIS) propagation. The propagation of waves that are bent downward by the ionosphere is dominated by a bi-refractive mechanism called ‘magneto-ionic propagation’. The polarization of both downward waves depends on the spatial angle between the Earth’s magnetic field and the direction of propagation of the radio wave. The probes and sensors described in this article are needed to simultaneously investigate signal fading and polarization dynamics on six radio wave propagation paths. The 1-Watt probes realize a 57 dB signal-to-noise ratio. The probe polarization is controlled using direct digital synthesis and the cross-polarization is 25–35 dB. The intermodulation-free dynamic range of the sensor exceeds 100 dB. Measurement speed is 3000 samples/second. This publication covers design, practical realization and deployment issues. Research performed with these devices will be shared in subsequent publications.
This paper studies the impact of illumination direction and bundle width on finger vascular pattern imaging and recognition performance. A qualitative theoretical model is presented to explain the projection of finger blood vessels on the skin. A series of experiments were conducted using a scanner of our design with illumination from the top, a single‐direction side (left or right), and narrow or wide beams. A new dataset was collected for the experiments, containing 4,428 NIR images of finger vein patterns captured under well‐controlled conditions to minimize position and rotation angle differences between different sessions. Top illumination performs well because of more homogenous, which enhances a larger number of visible veins. Narrower bundles of light do not affect which veins are visible, but they reduce the overexposure at finger boundaries and increase the quality of vascular pattern images. The narrow beam achieves the best performance with 0% of FNMR@FMR0.01%, and the wide beam consistently results in a higher false nonmatch rate. The comparison of left‐ and right‐side illumination has the highest error rates because only the veins in the middle of the finger are visible in both images. Different directional illumination may be interoperable since they produce the same vascular pattern and principally are the projected shadows on the finger surface. Score and image fusion for right‐ and left‐side result in recognition performance similar to that obtained with top illumination, indicating the vein patterns are independent of illumination direction. All results of these experiments support the proposed model.
Cybersecurity research relies on the reproducibility and deep understanding of attacks to devise appropriate solutions. Different kinds of testbeds are typically used to systematically execute attacks and evaluate defenses. Testbeds are widely used to demonstrate Building Automation and Control System (BACS) attacks and defenses, considered too risky to be executed on real infrastructures. However, those testbeds implement arbitrary configurations of building services that do not resemble real-world deployments. In this work, we present the first BACS testbed specially designed to assess the impact of cyberattacks from the victim’s perspective. It features general purpose building services such as illumination, ventilation, and temperature control, whose configuration is easily adapted to emulate the requirements of real-world locations. In this way, the context added to our testbed allows us to better understand the impact of BACS attacks through concrete and realistic scenarios. Moreover, by analyzing different configurations of the BACS (i.e., contexts), we found out that identical attacks may have dramatically different impacts. Thus, reinforcing our view on the relevance of adding context to BACS testbeds.