This paper presents an integrated germanium (Ge)-based THz impulse radiator with an optical waveguide coupled photoconductive switch in a low-cost silicon-on-insulator (SOI) process. This process provides a Ge thin film, which is used as photoconductive material. To generate short THz impulses, N++ implant is added to the Ge thin film to reduce its photo-carrier lifetime to sub-picosecond for faster transient response. A bow-tie antenna is designed and connected to the photoconductive switch for radiation. To improve radiation efficiency, a silicon lens is attached to the substrate-side of the chip. This design features an optical-waveguide-enabled “horizontal” coupling mechanism between the optical excitation signal and the photoconductive switch. The THz emitter prototype works with 1550 nm femtosecond lasers. The radiated THz impulses achieve a full-width at half maximum (FWHM) of 1.14 ps and a bandwidth of 1.5 THz. The average radiated power is 0.337 W. Compared with conventional THz photoconductive antennas (PCAs), this design exhibits several advantages: First, it uses silicon-based technology, which reduces the fabrication cost; second, the excitation wavelength is 1550 nm, at which various low-cost laser sources operate; and third, in this design, the monolithic excitation mechanism between the excitation laser and the photoconductive switch enables on-chip programmable control of excitation signals for THz beam-steering.
The technology for generating and detecting electromagnetic waves has evolved significantly over the last 120 years. In the early 1890s, Guglielmo Marconi used a spark-gap transmitter to build a wireless telegraphy system. In his design, he charged a capacitor to a high dc voltage and connected it to a parallel combination of an inductor, a second capacitor, and an antenna through an air gap. In this configuration, when the dc voltage of the first capacitor reaches the breakdown voltage of the gap, the air in the gap ionizes and reduces the resistance across the gap. This results in a large step voltage applied to the parallel combination of the inductor, second capacitor, and the antenna and converts the dc energy stored in the first capacitor to a damped oscillation at a low megahertz range that is radiated from the antenna. Marconi?s design used the spark gap as a fast high-voltage switch. The technology for generating electromagnetic waves then evolved further with the invention of vacuum tubes in the mid-1920s. Vacuum tubes enabled oscillatory signals to be amplified in the megahertz range and provided enough bandwidth for transferring audio signals.
This paper reports a 30-GHz impulse radiator utilizing an injection-locked asymmetric cross-coupled voltage-control-oscillator (VCO) with on-chip bow-tie antennas. The impulse radiator converts a digital trigger signal to a radiated impulse with a variable pulse-width down to 60psec with peak EIRP of 15.2dBm without using any lens. Coherent spatial pulse combining is demonstrated by using two widely spaced radiators. A timing jitter of the 216fsec for the combined signal is measured. The impulse radiator has the capability of producing 3D images with depth resolution of 33μm at 25cm of target distance in the air. The chip is implemented in a 0.13μm SiGe BiCMOS process technology. The total die area is 2.85mm 2 with maximum power consumption of 106mW.
28 April 2017 in IEEE Transactions on Microwave Theory and Techniques
We report a 30-GHz impulse radiator chip for high-resolution 3-D radar imaging. In this paper, an asymmetrical topology in the cross-coupled pulsed VCO is introduced to minimize timing jitter of radiated impulses to 178 fs, which enables highly efficient spatial combining. The coherent combining over the air has been performed with two widely spaced impulse radiators. The shortest full-width-at-half-maximum pulsewidth of 60 ps is recorded. 3-D images of various metallic objects and dielectric objects are produced using a custom-designed synthetic array imaging system. A depth resolution of 9 mm and a lateral resolution of 8 mm at a range of 10 cm have been achieved. The impulse radiator was implemented in a 130-nm SiGe BiCMOS process technology with an area of 2.85 mm 2 and an average power consumption of 106 mW.
18 November 2016 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a nonlinear Q-switching impedance (NLQSI) technique for picosecond pulse radiation in silicon. A prototype chip is designed with four NLQSI-based impulse generation channels, which can produce picosecond pulses with a reconfigurable amplitude. An on-chip impulse-coupling scheme combines the outputs from four channels and delivers the combined signal to an on-chip antenna. In addition, an asynchronous optical-sampling measurement system is used to characterize the radiated picosecond pulses in the time domain. The prototype chip can radiate 4-ps pulses with an SNR > 1 bandwidth of 161 GHz. Furthermore, pulse amplitude modulation is experimentally demonstrated. The prototype chip is fabricated in a 130-nm SiGe BiCMOS process technology with a die area of 1 mm 2 .