The technology for generating and detecting electromagnetic waves has evolved significantly over the last 120 years. In the early 1890s, Guglielmo Marconi used a spark-gap transmitter to build a wireless telegraphy system. In his design, he charged a capacitor to a high dc voltage and connected it to a parallel combination of an inductor, a second capacitor, and an antenna through an air gap. In this configuration, when the dc voltage of the first capacitor reaches the breakdown voltage of the gap, the air in the gap ionizes and reduces the resistance across the gap. This results in a large step voltage applied to the parallel combination of the inductor, second capacitor, and the antenna and converts the dc energy stored in the first capacitor to a damped oscillation at a low megahertz range that is radiated from the antenna. Marconi?s design used the spark gap as a fast high-voltage switch. The technology for generating electromagnetic waves then evolved further with the invention of vacuum tubes in the mid-1920s. Vacuum tubes enabled oscillatory signals to be amplified in the megahertz range and provided enough bandwidth for transferring audio signals.
In this letter, we present a machine-learning-based solution to classify wounds and normal skin based on a dielectric spectroscopy approach. Using a commercial network analyzer, we have measured the dielectric constant of normal skin and different types of wounds from multiple living mice across a frequency range of 10 MHz to 20 GHz. The acquired data across a wide frequency range is processed by a Data Dimensionality Reduction technique to extract the optimum frequency for wound dielectric spectroscopy. The results of our analysis reveal that different types of wounds can be distinguished by acquiring the dielectric constants in a frequency range of 1 GHz to 2 GHz. This finding relaxes the large bandwidth requirements of dielectric spectroscopy sensors. By adopting supervised learning classification tools, we have demonstrated that various tissue types across different samples can be classified with an accuracy of near 100%.
26 September 2019 in IEEE Transactions on Terahertz Science and Technology
Broadband sensing and spectroscopy in millimeter-wave and subterahertz frequencies can be facilitated with CMOS coherent detectors as a low-power, low-cost solution. This paper presents a fully integrated coherent detector with a broadband frequency comb as an on-chip reference signal. The receiver incorporates a frequency comb generator, which provides a broadband comb as a reference for heterodyne detection, and an NMOS field-effect transistor as the heterodyne detector. It also includes an on-chip elliptical antenna with a periodic structure which enhances its directivity up to +10 dBi without using a lens. The receiver detects any arbitrary spectrum from 50 GHz to 280 GHz with resolution of 2 Hz by tuning the comb spacing of the reference signal from 100 MHz to 5 GHz. The chip is implemented in a standard 65-nm CMOS process and it consumes 34 mW dc power.
A silicon integrated circuit is reported for radiating picosecond pulses with tunable repetition rate, covering frequencies from 0.03 to 1.03 THz. This source is used in a gas spectroscopy setup to measure the absorption lines of ammonia and water in the terahertz region.
13 February 2018 in IEEE Transactions on Microwave Theory and Techniques
This paper presents a millimeter-wave impulse receiver to detect the amplitude of picosecond pulses and extract their repetition rate with low timing jitter. The receiver is based on a self-mixing technique, which extracts the repetition rate by mixing multiple frequency tones of the pulse. The receiver, which is integrated with a broadband on-chip antenna, enables wireless time transfer with an accuracy of 0.38 ps. The fabricated chip is used to detect the amplitude and the repetition rate of sub-6-ps pulses. A tunable baseband amplifier is designed to amplify the extracted repetition rate in the 2-10-GHz range. Analysis of the self-mixing technique, simulation results of the receiver blocks, and measurement results of a multichip wireless synchronization test are reported in this paper.
Millimeter-wave radars offer a practical solution to distinguish objects made of different materials, shapes, and compositions. In this work, wireless classification of various materials is demonstrated using a broadband millimeter-wave CMOS integrated receiver. The receiver is used to record the transmitted power through multiple solid materials at various distances from the receiver in the W-band (75—110 GHz). Three supervised machine learning tools are trained by the recorded data to classify these materials into different categories. The trained classifiers were used to predict material and thickness of objects with varying distances from the receiver with accuracy levels of higher than 96% in material classification and 88% in thickness classification.