We investigated the role of the morphostructural setting and seismic and meteorological factors in the development of landslides in the piedmont of the Abruzzo Apennines. In February 2017, following a heavy snow precipitation event and a moderate seismic sequence (at the end of the Central Italy 2016–2017 seismic crisis), several landslides affected the NE-Abruzzo chain and piedmont area. This work is focused on the Ponzano landslide (Civitella del Tronto, Teramo) and the Castelnuovo landslide (Campli, Teramo) in the NE Abruzzo hilly piedmont. These landslides consist of: (1) a large translational slide-complex landslide, affecting the Miocene–Pliocene sandstone clay bedrock sequence of the piedmont hilly sector; and (2) a complex (topple/fall-slide) landslide, which occurred along a high and steep scarp on conglomerate rocks pertaining to terraced alluvial fan deposits of the Pleistocene superficial deposits. Both of the landslides are typical of the Abruzzo hilly piedmont and both of them largely affected houses and villages located on top of the scarp or within the slope. The landslides were studied by means of field geological and geomorphological mapping, borehole investigations, geostructural analysis and photogeological analysis. For the Ponzano landslide, a detail pre-post-landslide air photo interpretation allowed for defining the deformation pattern occurred on the slope. For the Castelnuovo landslide, the triggering factors and the stability of the slope were evaluated with FLAC3D numerical modelling, in pre- and post-landslide conditions. Through this integrated analysis, the triggering factors, the landslide mechanism and the stability conditions of the landslides and the characterization of two main types of landslides affecting the piedmont hilly area of the Abruzzo region were investigated.

This work presents the first results of an integrated geomorphological analysis of a large earthflow in Montebello sul Sangro (Abruzzo, Central Italy). The study is based on a multitemporal geomorphological investigation supported by the morphometric analysis of the drainage network and numerical landslide modelling. The multitemporal geomorphological investigation, based on the interpretation of aerial photos, LiDAR data and field geomorphological mapping, outlined the recent geomorphological history and multiple activation phases of the landslides. A 2D Finite Difference Method (FLAC, Fast Lagrangian Analysis of Continua) analysis of the main landslide scarp, affecting the village of Montebello sul Sangro (Italy), was performed. Finally, in order to outline the morphometric features of the landslide area, local slope autocorrelation was used as a morphometric index. The analysis was aimed at studying the evolution of the active current landslide and specifically the possible retreat of the main scarp.

The purpose of this research is to estimate the rockfall and debris flow hazard assessment of the SW escarpment of the Montagna del Morrone (Abruzzo, Central Italy). The study investigated the geomorphology of the escarpment, focusing on the type and distribution of the present landforms. Particular attention was devoted to the slope gravity landforms widely developed in this area, where the effective activity of the gravitational processes is mainly related to the rockfall and debris flows and documented by numerous landslides over time. Working from orography, hydrography, lithology, and geomorphology, the landslide distribution and their potential invasion areas were evaluated through two specific numerical modeling software. RAMMS and Rockyfor3D calculation codes were used in order to analyze the debris flow and rockfall type of landslides, respectively. The obtained results are of great interest when evaluating the hazard assessment in relation to the potential landslides. Moreover, the geographic information systems (GIS) provide a new geomorphological zonation mapping, with the identification of the detachment and certain and/or possible invasion areas of the landslide blocks. This method provides an effective tool to support the correct territorial planning and the management of the infrastructural settlements present in the area and human safety.

Geomorphological evolution, erosion and retreat processes that affect the rocky coasts of the mid-western Adriatic Sea (Abruzzo, Central Italy) are the subject of this research. This coastal sector, one of the few examples of clastic soft rock coasts in the Mediterranean Sea, is characterized by active, inactive and paleo cliffs, as well as coastal slopes, composed of the clayey-sandy-arenaceous-conglomeratic marine sequence (Early-Middle Pleistocene) covered by continental deposits (Late Pleistocene-Holocene). This study provides geomorphological and 3D modelling stability analyses of the cliffs of Torre Mucchia, Punta Lunga, Punta Ferruccio (Ortona, CH) and Punta Aderci (Vasto, CH), which are popular tourist sites included in natural reserve areas. They are representative of two main types of active cliffs on soft clastic rocks: cliffs on sandstone and cliffs on conglomerate with notches. In order to evaluate the processes and factors that induce cliffs to retreat and their recent evolution, the research was based on a DEM analysis (LIDAR 2 × 2 m data), aerial photos and an orthoimages interpretation, detailed geological–geomorphological surveys, and a structural analysis; field and remote investigations were combined with numerical modelling with a FLAC3D calculation code. Geological and geomorphological field data provided reliable 3D models, and FLAC3D numerical analyses allowed the definition of the most critical and/or failure areas, and the evaluation of the controlling factors, evolution mechanisms of the slopes and the sliding kinematics of gravitational instability phenomena. Different retreat mechanisms have been observed all along the investigated coastal sectors, induced by gravitational processes due to coastal erosion cycles at the foot of the cliffs, and controlled by lithological features and joints systems. The geomorphological analysis combined with the 3D modelling (i) showed that the retreat process of the cliffs is connected to translational slides and rockfalls (cliffs on sandstone), combined rockfalls, and topples (cliffs on conglomerate), largely controlled by main joints; (ii) defined the most critical areas along the cliffs. These results are of great interest in the assessment of hazard connected to potential sliding on the cliffs. Their implementation within Geographical Information Systems provides a valuable contribution to the integrated management of coastal areas, strongly improving the identification and prediction of landscape changes and supporting a new geomorphological hazards assessment, in areas of high tourism, as well as natural and cultural landscape value.