If multi-phase machines equipped with tooth-concentrated winding with half a slot per pole and per phase offer interesting characteristics (simplified manufacturing, no space subharmonic, fault-tolerant ability), their low fundamental winding factors make their designs and controls challenging. The paper addresses the case of a seven-phase Surface-mounted Permanent Magnet (SPM) machine which has a fundamental winding factor lower than the third. This so-called bi-harmonic specificity is considered in order to achieve good torque quality (average value and ripples). Regarding the design, the magnet layer is segmented into two identical radially magnetized tiles that cover about three-quarters the pole arc. Regarding the control, the rated Maximum Torque Per Ampere (MTPA) supply strategy (h1h3 control) aims at generating a third harmonic current component greater than the fundamental. A prototype has been manufactured: the ability of the machine to provide smooth torque is experimentally confirmed through the implementation of a simple MTPA control which copes with high distortion in no-load voltage.
Over the past decade, multilevel converters have received considerable interest in medium voltage applications. A large number of active switches in a multilevel converter increases the probability of switch failure and decreases the reliability of the system. An open switch fault can lead to a malfunction of the whole system and should be diagnosed as soon as possible. In this paper, an open-switch fault diagnosis method for a five-level H-Bridge T-type converter is presented. The proposed fault detection method and the fault localization algorithm are based on the switching patterns and the converter output voltage level observation. This approach is capable to detect and localize an open circuit fault for all switches. First, it is validated by simulations in Matlab Simulink and Simscape toolbox environments. Experimental results are also presented and discussed to validate the simulation results.
18 April 2024 in IEEE Transactions on Industrial Electronics
This article addresses the position sensorless control of a seven-phase surface-mounted permanent magnet (SPM) machine with highly nonsinusoidal back electromotive force (emf), which is termed biharmonic as fundamental and third harmonic are of the same order. The control is implemented through a vector decomposition of the seven-phase machine into three magnetically independent virtual machines, each of them been controlled in its own rotating frame. Three electromotive force methods to evaluate the rotor position can thus be achieved and the method will be all the robust as the current of the relative virtual machine is null. Since the rated control aims at producing the torque from the first and the third harmonics, the fifth harmonic of the back emf is used to estimated the position. Simulation and experimental tests show the real possibility of this approach. In particular, an original and specific startup procedure is developed, that is based on the sequential use of different virtual machines.
1 October 2025 in IEEE Journal of Oceanic Engineering