Saber Moradinejad

Dr. Saber Moradinejad


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 June 2022 in Toxins
Verified
Journal Article
Open access
PDF file
FJFarhad Jalili
Farhad Jalili
SMSaber Moradinejad
Saber Moradinejad
Arash ZamyadiArash Zamyadi
Arash Zamyadi
SDSarah Dorner
Sarah Dorner
Sébastien SauvéSébastien Sauvé
Sébastien Sauvé
MPMichele Prevost
Michele Prevost
Freshwater bodies and, consequently, drinking water treatment plants (DWTPs) sources are increasingly facing toxic cyanobacterial blooms. Even though conventional treatment processes including coagulation, flocculation, sedimentation, and filtration can control cyanobacteria and cell-bound cyanotoxins, these processes may encounter challenges such as inefficient removal of dissolved metabolites and cyanobacterial cell breakthrough. Furthermore, conventional treatment processes may lead to the accumulation of cyanobacteria cells and cyanotoxins in sludge. Pre-oxidation can enhance coagulation efficiency as it provides the first barrier against cyanobacteria and cyanotoxins and it decreases cell accumulation in DWTP sludge. This critical review aims to: (i) evaluate the state of the science of cyanobacteria and cyanotoxin management throughout DWTPs, as well as their associated sludge, and (ii) develop a decision framework to manage cyanobacteria and cyanotoxins in DWTPs and sludge. The review identified that lab-cultured-based pre-oxidation studies may not represent the real bloom pre-oxidation efficacy. Moreover, the application of a common exposure unit CT (residual concentration × contact time) provides a proper understanding of cyanobacteria pre-oxidation efficiency. Recently, reported challenges on cyanobacterial survival and growth in sludge alongside the cell lysis and cyanotoxin release raised health and technical concerns with regards to sludge storage and sludge supernatant recycling to the head of DWTPs. According to the review, oxidation has not been identified as a feasible option to handle cyanobacterial-laden sludge due to low cell and cyanotoxin removal efficacy. Based on the reviewed literature, a decision framework is proposed to manage cyanobacteria and cyanotoxins and their associated sludge in DWTPs.

20 November 2020 in Toxins
Verified
Journal Article
Open access
PDF file
SMSaber Moradinejad
Saber Moradinejad
HTHana Trigui
Hana Trigui
JGJuan Francisco Guerra
Juan Francisco Guerra
JSJesse Shapiro
Jesse Shapiro
YTYves Terrat
Yves Terrat
MPMichele Prevost
Michele Prevost
Fresh-water sources of drinking water are experiencing toxic cyanobacterial blooms more frequently. Chemical oxidation is a common approach to treat cyanobacteria and their toxins. This study systematically investigates the bacterial/cyanobacterial community following chemical oxidation (Cl2, KMnO4, O3, H2O2) using high throughput sequencing. Raw water results from high throughput sequencing show that Proteobacteria, Actinobacteria, Cyanobacteria and Bacteroidetes were the most abundant phyla. Dolichospermum, Synechococcus, Microcystis and Nostoc were the most dominant genera. In terms of species, Dolichospermum sp.90 and Microcystis aeruginosa were the most abundant species at the beginning and end of the sampling, respectively. A comparison between the results of high throughput sequencing and taxonomic cell counts highlighted the robustness of high throughput sequencing to thoroughly reveal a wide diversity of bacterial and cyanobacterial communities. Principal component analysis of the oxidation samples results showed a progressive shift in the composition of bacterial/cyanobacterial communities following soft-chlorination with increasing common exposure units (CTs) (0–3.8 mg·min/L). Close cyanobacterial community composition (Dolichospermum dominant genus) was observed following low chlorine and mid-KMnO4 (287.7 mg·min/L) exposure. Our results showed that some toxin producing species may persist after oxidation whether they were dominant species or not. Relative persistence of Dolichospermum sp.90 was observed following soft-chlorination (0.2–0.6 mg/L) and permanganate (5 mg/L) oxidation with increasing oxidant exposure. Pre-oxidation using H2O2 (10 mg/L and one day contact time) caused a clear decrease in the relative abundance of all the taxa and some species including the toxin producing taxa. These observations suggest selectivity of H2O2 to provide an efficient barrier against toxin producing cyanobacteria entering a water treatment plant.

17 May 2019 in Toxins
Verified
Journal Article
Open access
PDF file
SMSaber Moradinejad
Saber Moradinejad
CGCaitlin Glover
Caitlin Glover
JMJacinthe Mailly
Jacinthe Mailly
TZTahere Zadfathollah
Tahere Zadfathollah
SPSigrid Peldszus
Sigrid Peldszus
Arash ZamyadiArash Zamyadi
Arash Zamyadi
Drinking water treatment plants throughout the world are increasingly facing the presence of toxic cyanobacteria in their source waters. During treatment, the oxidation of cyanobacteria changes cell morphology and can potentially lyse cells, releasing intracellular metabolites. In this study, a combination of techniques was applied to better understand the effect of oxidation with chlorine, ozone, potassium permanganate, and hydrogen peroxide on two cell cultures (Microcystis, Dolichospermum) in Lake Champlain water. The discrepancy observed between flow cytometry cell viability and cell count numbers was more pronounced for hydrogen peroxide and potassium permanganate than ozone and chlorine. Liquid chromatography with organic carbon and nitrogen detection was applied to monitor the changes in dissolved organic matter fractions following oxidation. Increases in the biopolymer fraction after oxidation with chlorine and ozone were attributed to the release of intracellular algal organic matter and/or fragmentation of the cell membrane. A novel technique, Enhanced Darkfield Microscopy with Hyperspectral Imaging, was applied to chlorinated and ozonated samples. Significant changes in the peak maxima and number of peaks were observed for the cell walls post-oxidation, but this effect was muted for the cell-bound material, which remained relatively unaltered.

16 July 2019 in Water
Verified
Journal Article
Open access
PDF file
SMSaber Moradinejad
Saber Moradinejad
DVDries Vandamme
Dries Vandamme
CGCaitlin Glover
Caitlin Glover
TZTahere Zadfathollah
Tahere Zadfathollah
AZArash Zamyadi
Arash Zamyadi
The co-occurrence of non-toxic phytoplankton alongside cyanobacteria adds to the challenge of treating source waters with harmful algal blooms. The non-toxic species consume the oxidant and, thereby, reduce the efficacy of oxidation of both the extracellular and intracellular cyanotoxins. In this work, a 3D printed mini-hydrocyclone was used to separate a mixture of non-toxic green algae, Scenedesmus obliquus, from a toxic species of cyanobacteria, Microcystis aeruginosa. When water is pumped through the mini-hydrocyclone, cells exit through an overflow or underflow port depending on their size, shape, and density relative to the other cells and particles in the water matrix. The overflow port contains the cells that are smaller and less dense since these particles move toward the center of the hydrocyclone. In this work, the majority (>93%) of Microcystis cells were found in the overflow while the underflow contained primarily the Scenedesmus (>80%). This level of separation efficiency was maintained over the 30-min experiment and the majority of both cells (>86%) remained viable following the separation, which indicates that the pumping combined with forces exerted within the mini-hydrocyclone were not sufficient to cause cell death. The impact of free chlorine on the cells both pre-separation and post-separation was evaluated at two doses (1 and 2 mg/L). After separation, the overflow, which contained primarily Microcystis, had at least a 24% reduction in the free chlorine decay rate as compared to the feed water, which contained both species. This reduction in chlorine consumption shows that the cells separated via mini-hydrocyclone would likely require lower doses of oxidant to produce a similar level of degradation of the cyanotoxins present in either the extracellular or intracellular form. However, future work should be undertaken to evaluate this effect in natural bloom samples.

18 November 2022 in Water
Verified
Journal Article
Open access
PDF file
LMLiya Ma
Liya Ma
SMSaber Moradinejad
Saber Moradinejad
JGJuan Francisco Guerra
Juan Francisco Guerra
Arash ZamyadiArash Zamyadi
Arash Zamyadi
SDSarah Dorner
Sarah Dorner
MPMichele Prevost
Michele Prevost
Recently, in situ YSI EXO2 phycocyanin fluorescence probes have been widely deployed as a means to determine cyanobacterial abundance in drinking water sources, yet few studies have evaluated the effects of natural organic matter (NOM) and the ambient water temperature on the probe readings. In this study, Suwannee River NOM was added to laboratory cultivated cyanobacterial species to test the performance of the phycocyanin probe. The impact of temperature on phycocyanin fluorescence was evaluated by monitoring the laboratory cultivated cyanobacterial species and extracted phycocyanin pigment. Additionally, in situ phycocyanin fluorescence of the field samples from the water intake of a drinking water treatment plant (DWTP) in 2018 were compared with grab sample laboratory taxonomic analyses. We found: (1) the presence of Suwannee River NOM leads to the decrease in cell-bound cyanobacterial phycocyanin readings; (2) increasing ambient water temperature reduces dissolved and cell-bound cyanobacterial phycocyanin readings; (3) field study phycocyanin probe readings significantly correlated with the total cyanobacterial biovolume (R = 0.73, p < 0.1), and the relationship depends on the biovolume of dominant cyanobacterial species; (4) phycocyanin probe readings have a strong positive correlation with the natural light intensities; and (5) probe users should be fully aware of the sources of interferences when interpreting the results and apply the other physical-chemical parameters data simultaneously generated by the fluorometry to improve the probe’s measurements.