An adaptive model predictive controller with a new scheduling scheme for turbofan engines is proposed, which can transfer engine from one working state to the others within the flight envelope. First, the flight envelope is divided into several sections according to the engine inlet parameters, and the nominal points in each section are determined, respectively. Then, considering the requirements of the turbofan engines, a constrained linear model predictive control algorithm is improved, and a series of constrained predictive controllers are designed based on the linear models at different nominal points. Furthermore, a novel scheduling scheme with two layers is constructed, where the first layer is the flight envelope scheduling layer that introduces fuzzy membership degree logic to distribute the weights of all nominal predictive controllers, and the second layer is the power scheduling layer by adopting a linear interpolation method. Simulation results show that the proposed scheduling scheme can coordinate these two layers to realize the steady-state and transition-state control of the turbofan engines at off-nominal points within the envelope, which provides an effective approach for the design of the adaptive controllers.
12 March 2024 in IEEE Transactions on Intelligent Transportation Systems
This article studies a data-driven co-designing method for networked control systems under denial-of-service attacks and communication delays, using only noisy data of system trajectories instead of explicit system models. To this end, a delay system framework is first established by investigating the effect of both denial-of-service attacks and time-varying delays. In order to reduce the consumption of the network resource, a novel dynamic event-triggering scheme is proposed. The sensor is time-triggered while the controller and the actuator are event-triggered in the scheme. Based on the Lyapunov stability approach and a data-based representation of unknown systems, a data-driven method for co-designing the controller gain and event-triggering parameters is developed. In the presence of denial-of-service attacks with unknown patterns, the proposed data-driven co-designing method demonstrates the trade-off between the system performance metric and the denial-of-service resilience level. Furthermore, the impact of time-varying communication delays on the denial-of-service resilience level is investigated. Finally, several numerical experiments demonstrate the effectiveness of the proposed methods.
Generally, asymptotic tracking motion control algorithm can ensure the stability of the closed-loop system, but hardly exploits the potential system performance. As an alternative, a high-accuracy control method with finite-time regulation is studied in this paper for hydraulic actuators pertaining to complex unknowns and limited communication bandwidth. During system modeling, a hydraulic actuator system is expressed in the Brunovsky form with a lumped disturbance term, instead of the conventional semi-strict-feedback form, such that the tracking control can be transformed to the stabilizing problem. As a result, the homogeneity-based finite-time motion controller enables to be recursively constructed. This paper develops a finite-time observer to simultaneously estimate the partial unknown state and the lumped disturbance, with a short time, thereby improving the disturbance rejection and transient response. Moreover, a novel threshold triggering mechanism is proposed to alleviate the limited communication resources and ensure the relatively small amplitude fluctuation of control inputs via a minimum function. The stability and finite-time convergence of the closed-loop system are all proved. Meanwhile, the Zeno behavior is avoided. Finally, the proposed control scheme is tested and verified on the aero-engine Hardware-in-the-loop (HIL) test-rig with hydraulic actuators. Note to Practitioners —This paper displays how to utilize the event-triggered communication protocol and finite-time control for hydraulic actuators in the networked control systems. The designed event-triggered mechanism saves more communication resources while ensuring the satisfied motion control effect. Moreover, the internal and external uncertainties are all tackled with the developed finite-time observer. Experimental results verify that the proposed schemes are easily implemented, but with the plentiful performance improvements of motion control, disturbance attenuation (i.e., finite-time output tracking and unknown estimation), and the capability on saving network resources. In addition, the proposed event-driven control scheme is also feasible for other mechatronic systems, e.g., linear motor, DC motor and marine surface vehicles.
3 January 2025 in IEEE Transactions on Fuzzy Systems
This paper investigates the event-triggered trajectory tracking control for unmanned surface vessels with prescribed performance subjected to asymmetric time-varying state constraints. In order to realize the prescribed-time control task, a performance function is introduced and the fuzzy logic systems are adopted to estimate the unknown nonlinearities of the USVs model. Subsequently, a flexible event-triggered mechanism is designed to minimize the wastage of communication resource, taking into account the continuous updating of the actual control input. A practical virtual control signal is devised and used for backstepping design. On this basis, an event-triggered adaptive fuzzy trajectory tracking control algorithm with prescribed performance is developed by combining the defined performance function and the barrier Lyapunov function approach, which not only solves the asymmetric time-varying state constraints of the USVs, but also ensures that the USVs achieve the predetermined tracking performance, meanwhile, all the closed-loop signals can be maintained bounded. Finally, the simulation results are performed to demonstrate the feasibility of the developed control scheme.
17 January 2024 in Journal of the Franklin Institute