The present research envisages a method for calculating the dynamic responses of the wind turbines under typhoon. The measured power spectrum and inverse Fourier transform are used to generate the fluctuating wind field in the eyewall of the typhoon. Based on the beam theory, the unsteady aerodynamic model and the wind turbine dynamic model are coupled to calculate the dynamic response. Furthermore, using this method, the aeroelastic responses of a 6 MW wind turbine at different yaw angles are studied, and a 2 MW wind turbine are also calculated to verify the applicability of the results for different sizes of wind turbines. The results show that the turbulence characteristics of the fluctuating wind simulated by the proposed method is in good agreement with the actual measurement. Compared with the results simulated by the recommended power spectrum like the Kaimal spectrum, the energy distribution and variation characteristics simulated by the proposed method represent the real typhoon in a superior manner. It is found that the blade vibrates most violently at the inflow yaw angle of 30 degrees under the coupled effect of the aerodynamic, inertial and structural loads. In addition, the load on the tower exceeds the design limit values at the yaw angles of both 30 degrees and 120 degrees.
The cable cross section of an offshore wind farm power system is conventionally determined on the basis of the maximum current carrying capacity. However, this criterion cannot be matched and optimized with connection topology, which may lead to a large overall resistance level in the topology, thereby causing severe energy loss. In this pursuit, the present work envisages the establishment of a coupling optimization method of connection topology and cable cross-section planning for the first time. Based on this method, the power system of a small discrete wind farm is optimized and its results are compared with the results of the traditional design methods. The results indicate that an optimal matching of connection topology and cable cross section can be achieved using the proposed method. Besides, the optimal topology obtained uses more branches, and the large cross-section cables are reasonably used on the large-current cable segments, thus dramatically reducing the energy loss and minimizing the total cost of the power system. The proposed method is very versatile and suitable for the optimization of power systems containing any number of wind turbines and substations. Moreover, it can be combined with any evolutionary algorithm.
Convergence performance and optimization efficiency are two critical issues in the application of commonly used evolution algorithms in multi-objective design of wind turbines. A gradient-based multi-objective evolution algorithm is proposed for wind turbine blade design, based on uniform decomposition and positive-gradient differential evolution. In the uniform decomposition, uniformly distributed reference vectors are established in the objective space to maintain population diversity so that the population aggregations, which are commonly observed for wind turbine blade design using gradient-free algorithms, are minimized. The positive-gradient differential evolution is introduced for population evolution to increase optimization efficiency by guiding the evolutionary process and significantly reducing searching ranges of each individual. Two-, three- and four-objective optimizations of 1.5 MW wind turbine blades reveal that the proposed algorithm can deliver uniformly distributed optimal solutions in an efficient way, and has advantages over gradient-free algorithms in terms of convergence performance and optimization efficiency. These advantages increase with the optimization dimension, and the proposed algorithm is more suitable for optimizations of small size populations, thus remarkably enhancing the design efficiency.