A self-priming centrifugal pump can be used in various areas such as agricultural irrigation, urban greening, and building water-supply. In order to simulate the gas-water two-phase flow in the self-priming process of a self-priming centrifugal pump, the unsteady numerical calculation of a typical self-priming centrifugal pump was performed using the ANSYS Computational Fluid X (ANSYS CFX) software. It was found that the whole self-priming process of a self-priming pump can be divided into three stages: the initial self-priming stage, the middle self-priming stage, and the final self-priming stage. Moreover, the self-priming time of the initial and final self-priming stages accounts for a small percentage of the whole self-priming process, while the middle self-priming stage is the main stage in the self-priming process and further determines the length of the self-priming time.

Submersible tubular pumps are an ideal choice for pump stations that require high flow rates and low lift. These pumps combine the unique features of submersible motors with axial flow pump technology, making them highly efficient and cost-effective. They have found extensive applications in China’s rapidly developing water conservancy industry. In this research, we focus on investigating the pressure pulsation characteristics of the internal bulb body in a specific pump station project in China. To conduct our analysis, we utilize a model of the submersible tubular pump and strategically position 18 monitoring points. These monitoring points cover various sections, including the impeller inlet and outlet, guide vane outlet, as well as the inlet, middle, and outlet sections of the bulb body segment. To calculate the unsteady flow of the system, we employ numerical simulation techniques. By combining the outcomes of model tests, we determine the pressure pulsation characteristics. The comparison of results reveals a remarkable similarity between the efficiency–head curves obtained from the numerical simulation and the model test. While the model test yields slightly higher head results, the numerical simulation indicates slightly higher efficiency values. This finding lends strong support to the reliability of numerical simulation results, which can provide valuable insights for the design and optimization of submersible tubular pumps. Overall, submersible tubular pumps demonstrate their suitability for pump stations with high flow rates and low lift requirements. The study of pressure pulsation characteristics within the bulb body contributes to a better understanding of their performance and facilitates their further application in the field of water conservancy engineering.

In order to study the transient characteristics of a nuclear reactor coolant pump in coast-down process under power failure condition, a transient test device for the nuclear reactor coolant pump is set up. This study investigates the effects of the rotor of the nuclear reactor coolant pump and the circuit characteristics on the nuclear reactor coolant pump during the coast-down process by changing the rotary inertia of the flywheel and the resistance of the pipe system. The results show that the greater the moment of inertia is, the more slowly rotational speed, flow, and lift get down in the same coast-down period. The change in the pipe resistance has little effect on the rate of decline in the coast-down process, but it has a great influence on the descent speed of the flow rate and lift. When the pipe resistance is small, the corresponding flow rate decreases faster, but it is slower for the corresponding lift. The results are of great significance in controlling the stability and reliability of the nuclear reactor coolant pump in the coast-down process.

Nuclear reactor coolant pump as one of the most critical equipment is the only one rotating equipment in first loop system of nuclear power plant. Due to the asymmetric structure of the pump body, especially the existence of outlet segment lead to a certain of radial force, the magnitude of radial force directly affects the work stability of the reactor coolant pump. The nuclear reactor coolant pump could stability work under those transient complex conditions is an important index of its performance. To study the cavitation characteristics and radial force of reactor coolant pump on transient cavitation, a prototype pump and those exhibiting different gravity center offsets are analyzed numerically with CFD software ANSYS CFX by employing RNG k-ε model and two-fluid two-phase flow model. Through the experiment-combined simulation, the variations of cavitation characteristics and radial force of the reactor coolant pump under different eccentricities are characterized. As revealed from the results, the flow characteristics of the internal flow field of the nuclear main pump change after the axis is offset by different distance. The influence of eccentricity on the cavitation of the nuclear main pump is mainly manifested at the impeller inlet from cavitation inception to severe cavitation. When the eccentricity is 5mm, the cavitation performance is improved. The effect of eccentricity on the radial force of impeller is reflected in the variation of force direction. Compared with other plans, the radial force is superior in transient cavitation under the eccentricity of 5mm.