Periodic structural health monitoring of infrastructure systems is important to avoid economic losses and human casualties. Traditionally, deformation monitoring has been done through surveying techniques. Recently, with the increased availability of inexpensive off-the-shelf cameras, photogrammetry has become a viable noncontact alternative for complete three-dimensional reconstruction of the object or surface of interest. This paper aims at combining two methodologies of photogrammetric reconstruction—image-matching-based reconstruction and model-based image fitting—to achieve submillimeter precision for the estimation of both vertical deflections and horizontal displacements. The proposed methodology was tested with data collected using a photogrammetric system at a structures laboratory where a concrete beam was subjected to different loading conditions by a hydraulic actuator. The experimental results showed that the photogrammetric system was capable of monitoring both static and dynamic def...
Consumer-grade digital cameras suffer from geometrical instability that may cause problems when used in photogrammetric applications. This paper provides a comprehensive review of this issue of interior orientation parameter variation over time, it explains the common ways used for coping with the issue, and describes the existing methods for performing stability analysis for a single camera. The paper then points out the lack of coverage of stability analysis for multi-camera systems, suggests a modification of the collinearity model to be used for the calibration of an entire photogrammetric system, and proposes three methods for system stability analysis. The proposed methods explore the impact of the changes in interior orientation and relative orientation/mounting parameters on the reconstruction process. Rather than relying on ground truth in real datasets to check the system calibration stability, the proposed methods are simulation-based. Experiment results are shown, where a multi-camera photogrammetric system was calibrated three times, and stability analysis was performed on the system calibration parameters from the three sessions. The proposed simulation-based methods provided results that were compatible with a real-data based approach for evaluating the impact of changes in the system calibration parameters on the three-dimensional reconstruction.
Consumer-grade cameras are generally low-cost and available off-the-shelf, so having multicamera photogrammetric systems for 3D reconstruction is both financially feasible and practical. Such systems can be deployed in many different types of applications: infrastructure health monitoring, cultural heritage documentation, bio-medicine, as-built surveys, and indoor or outdoor mobile mapping for example. A geometric system calibration is usually necessary before a data acquisition mission in order for the results to have optimal accuracy. A typical system calibration must address the estimation of both the interior and the exterior, or relative, orientation parameters for each camera in the system. This article reviews different ways of performing a calibration of a photogrammetric system consisting of multiple cameras. It then proposes a methodology for the simultaneous estimation of both the interior and the relative orientation parameters which can work in several different types of scenarios including a multicamera multisystem calibration. A rigorous in situ system calibration was successfully implemented and tested. The same algorithm is able to handle the equivalent to a traditional-style bundle adjustment, that is, a network solution without constraints, for a single or multicamera calibrations, and the proposed bundle adjustment with built-in relative orientation constraints for the calibration of a system or multiple systems of cameras.
Immersive technologies are becoming a powerful tool for educators across multiple disciplines including geospatial science. They offer new ways to engage and educate geospatial students, removing barriers that may exist in traditional teaching methods. Especially because the limitations of 2D screens are often exceeded by the complexity of modern data sets. Examples of challenges that educators often encounter are explaining theoretical concepts in the classroom, providing alternate scenarios, preparing students for physical labs, and limited / restricted access to physical sites. Immersive technologies can be a great resource to support on-site lectures and enhance remote learning, a necessity in today's educational panorama. Immersive technologies typically include virtual, augmented, and mixed reality. Each method offers different pedagogical advantages and poses different challenges. Before any implementation, these advantages and challenges must be examined and understood to maximize the benefit of immersive methods to the students and mitigate potential drawbacks that could hinder learning outcomes. This paper provides a review of the different immersive methods, presenting examples of their application in geospatial education with lessons learned and recommendations for future work. The case examples include a variety of different instruments and tasks such as the simulation of GNSS, differential leveling, total station operations, and airborne LiDAR data collection.
24 June 2023 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Technological advancements in the fields of Photogrammetry, Remote Sensing, and Geospatial Sciences continuously alter the way we collect, process, and interpret datasets. Accreditation bodies and institutions often need to respond to those changes and make timely modifications to stay current with technology changes and industry needs. However, it can be generally stated that the industry can adapt and adopt technological changes faster than accreditation organizations and institutions, because the process of modernizing curricula can be time consuming and slow based on organization / university / college policies. In addition to industry demands, institutions must adhere to and follow accreditation requirements. This paper reviews several accreditation requirements related to Photogrammetry, Remote Sensing, and Geospatial Sciences. The accreditation bodies that are reviewed focus on organizations in Northern America and Europe due to ease of access to information. The review provides insights about their curricula criteria, their level of detail, if they can be considered current based on industry needs, and if they provide enough flexibility for modernizing curricula without violation of accreditation policies and criteria.