Because of the low accuracy of the current machine olfactory algorithms in detecting two mixed gases, this study proposes a hybrid gas detection algorithm based on an extreme random tree to greatly improve the classification accuracy and time efficiency. The method mainly uses the dynamic time warping algorithm (DTW) to perform data pre-processing and then extracts the gas characteristics from gas signals at different concentrations by applying a principal component analysis (PCA). Finally, the model is established by using a new extreme random tree algorithm to achieve the target gas classification. The sample data collected by the experiment was verified by comparison experiments with the proposed algorithm. The analysis results show that the proposed DTW algorithm improves the gas classification accuracy by 26.87%. Compared with the random forest algorithm, extreme gradient boosting (XGBoost) algorithm and gradient boosting decision tree (GBDT) algorithm, the accuracy rate increased by 4.53%, 5.11% and 8.10%, respectively, reaching 99.28%. In terms of the time efficiency of the algorithms, the actual runtime of the extreme random tree algorithm is 66.85%, 90.27%, and 81.61% lower than that of the random forest algorithm, XGBoost algorithm, and GBDT algorithm, respectively, reaching 103.2568 s.
As a typical machine olfactory system index, the accuracy of hybrid gas identification and concentration detection is low. This paper proposes a novel hybrid gas identification and concentration detection method. In this method, Kernel Principal Component Analysis (KPCA) is employed to extract the nonlinear mixed gas characteristics of different components, and then K-nearest neighbour algorithm (KNN) classification modelling is utilized to realize the recognition of the target gas. In addition, this method adopts a multivariable relevance vector machine (MVRVM) to regress the multi-input nonlinear signal to realize the detection of the concentration of the hybrid gas. The proposed method is validated by using CO and CH4 as the experimental system samples. The experimental results illustrate that the accuracy of the proposed method reaches 98.33%, which is 5.83% and 14.16% higher than that of principal component analysis (PCA) and independent component analysis (ICA), respectively. For the hybrid gas concentration detection method, the CO and CH4 concentration detection average relative errors are reduced to 5.58% and 5.38%, respectively.
Machine learning algorithms play an important role in the detection of toxic, flammable and explosive gases, and they are extremely important for the study of mixed gas classification and concentration prediction methods. To solve the problem of low prediction accuracy of gas concentration regression prediction algorithms, a gas concentration prediction algorithm based on a stacking model is proposed in the current research. In this paper, the stochastic forest, extreme random regression tree and gradient boosting decision tree (GBDT) regression algorithms are selected as the base learning devices and use the stacking algorithm to take the output of each base learning device as input to train a new model to produce a final output. Through the stacking model, the grid search algorithm is studied to automatically optimize the parameters so that the performance of the entire system can reach the optimal parameters. Through experimental simulation, the gas concentration prediction algorithm based on stacking model has better prediction effect than other integrated frame algorithms and the accuracy of mixed gas concentration prediction is improved.
9 January 2025 in IEEE Transactions on Instrumentation and Measurement
The field of rotating machinery has long faced the challenge of limited annotated samples, which significantly affects the performance of neural network models. Most existing methods rely mainly on a few annotated samples for fault diagnosis algorithm design without fully utilizing a large amount of unannotated data in the monitoring phase. To alleviate the effect of limited annotation information, this paper proposes a self-supervised multi-view contrastive learning network (SMCLN) based on time-frequency analysis. This framework learns from a large number of unlabeled samples and leverages the rich feature information contained in time-frequency images to train a feature extractor with strong generalization capabilities. Given the significant differences between vibration signals and images, this paper designs appropriate data augmentation methods. Additionally, a multi-task mechanism is introduced by designing a novel loss function, enabling the network to simultaneously handle both matching and prediction tasks. This approach enhances the representational capacity and further improves overall performance. Finally, a simple linear classifier is added and fine-tuned on a small amount of labeled data. Experiments on both public and laboratory datasets demonstrate that our proposed SMCLN can effectively extract valuable feature information and significantly improve classification accuracy under limited annotated dataset.
Machine learning algorithms play an important role in fault detection and fault diagnosis of gas sensor arrays. Because the gas sensor array will see stability degradation and a shift in output signal amplitude under long-term operation, it is very important to detect the abnormal output signal of the gas sensor array in time and achieve accurate fault location. In order to solve the problem of low detection accuracy of micro-faults in gas sensor arrays, this paper adopts the serial principal component analysis (SPCA) method, which combines the advantages of principal component analysis (PCA) in the linear part and the advantages of kernel principal component analysis (KPCA) in the nonlinear part. The experimental results show that this method is more sensitive to micro-faults and has better fault detection accuracy than the fault detection methods of PCA and KPCA. In addition, in order to solve the current problem of low accuracy of multiple-fault isolation, a SPCA-based reconstruction contribution fault isolation method is proposed in this paper. The experimental results show that this method has higher fault isolation accuracy than the method based on contribution graph.
25 September 2023 in Measurement Science and Technology
Rotating machinery is widely utilized as mechanical equipment in the industrial field. However, due to the complex working conditions, the existing fault diagnosis methods have failed to address good results in practical applications. To improve the fault diagnosis performance of rotating machinery in a noisy environment, a new multi-scale convolution neural network (MSCN) based on a self-calibrating attention module is proposed. First, this thesis constructs a multi-scale convolution layer with a wide convolution kernel to form an efficient sampling structure at the filter level, which can filter out incoherent noise from the signals and extract rich features. Second, a multi-scale self-calibrating attention module is implemented with two identical self-calibrating convolutional networks to continuously focus on significant embeddings and adaptively combine information from different spatial dimensions. Third, the multi-dimensional characteristics are integrated by the feature cascade layer, and then the fault modes are identified though the classifier layer under noise. Finally, based on the Case Western Reserve University datasets and Paderborn University bearing datasets, the experimental results show that our proposed MSCN can significantly enhance the fault identification ability to rotate machinery in a noisy environment.