As a typical machine olfactory system index, the accuracy of hybrid gas identification and concentration detection is low. This paper proposes a novel hybrid gas identification and concentration detection method. In this method, Kernel Principal Component Analysis (KPCA) is employed to extract the nonlinear mixed gas characteristics of different components, and then K-nearest neighbour algorithm (KNN) classification modelling is utilized to realize the recognition of the target gas. In addition, this method adopts a multivariable relevance vector machine (MVRVM) to regress the multi-input nonlinear signal to realize the detection of the concentration of the hybrid gas. The proposed method is validated by using CO and CH4 as the experimental system samples. The experimental results illustrate that the accuracy of the proposed method reaches 98.33%, which is 5.83% and 14.16% higher than that of principal component analysis (PCA) and independent component analysis (ICA), respectively. For the hybrid gas concentration detection method, the CO and CH4 concentration detection average relative errors are reduced to 5.58% and 5.38%, respectively.
This paper describes the design and implementation of a radiosonde which can measure the meteorological temperature, humidity, pressure, and other atmospheric data. The system is composed of a CPU, microwave module, temperature sensor, pressure sensor and humidity sensor array. In order to effectively solve the humidity sensor condensation problem due to the low temperatures in the high altitude environment, a capacitive humidity sensor including four humidity sensors to collect meteorological humidity and a platinum resistance heater was developed using micro-electro-mechanical-system (MEMS) technology. A platinum resistance wire with 99.999% purity and 0.023 mm in diameter was used to obtain the meteorological temperature. A multi-sensor data fusion technique was applied to process the atmospheric data. Static and dynamic experimental results show that the designed humidity sensor with platinum resistance heater can effectively tackle the sensor condensation problem, shorten response times and enhance sensitivity. The humidity sensor array can improve measurement accuracy and obtain a reliable initial meteorological humidity data, while the multi-sensor data fusion technique eliminates the uncertainty in the measurement. The radiosonde can accurately reflect the meteorological changes.
Electronic noses are one of the predominant technological choices for gas mixture detection, but their application in real-world atmospheric environments still leaves several issues to be resolved. The key bottleneck is the effect of turbulence caused by the diffusion of gases in the atmosphere on the quantitative and qualitative analytical performance of the electronic nose. In light of this, this paper presents a quantitative and qualitative analysis strategy for gas mixture monitoring. This strategy adopts baseline manipulation of the raw sensor data to reduce drift interference, and then performs feature extraction on the multidimensional response signals of the MOS gas sensor array using principal component analysis (PCA). In order to improve gas mixture recognition accuracy, the whale optimization algorithm (WOA) is used to optimize the network structure of the long short-term memory (LSTM) model for turbulent gas mixture composition recognition. The least squares support vector machine (LSSVM) algorithm is adopted to implement turbulent gas mixture concentration prediction. This paper focuses on two aspects of hyper-parameter optimization for the development of an LSSVM with particle swarm optimization (PSO) and for improved training sample selection for the LSSVM which should subsequently increase the accuracy of concentration estimation. The effectiveness of the proposed strategy is evaluated with a dataset from a chemical sensor array exposed to turbulent gas mixtures. Experimental results revealed that the proposed strategy for turbulent gas mixtures has satisfactory outcomes for both qualitative gas composition recognition and quantitative gas concentration prediction.
The main part of the magnetic fluxgate sensor is the magnetic core, the hysteresis characteristic of which affects the performance of the sensor. When the fluxgate sensors are modelled for design purposes, an accurate model of hysteresis characteristic of the cores is necessary to achieve good agreement between modelled and experimental data. The Jiles-Atherton model is simple and can reflect the hysteresis properties of the magnetic material precisely, which makes it widely used in hysteresis modelling and simulation of ferromagnetic materials. However, in practice, it is difficult to determine the parameters accurately owing to the sensitivity of the parameters. In this paper, the Biogeography-Based Optimization (BBO) algorithm is applied to identify the Jiles-Atherton model parameters. To enhance the performances of the BBO algorithm such as global search capability, search accuracy and convergence rate, an improved Biogeography-Based Optimization (IBBO) algorithm is put forward by using Arnold map and mutation strategy of Differential Evolution (DE) algorithm. Simulation results show that IBBO algorithm is superior to Genetic Algorithm (GA), Particle Swarm Optimization (PSO) algorithm, Differential Evolution algorithm and BBO algorithm in identification accuracy and convergence rate. The IBBO algorithm is applied to identify Jiles-Atherton model parameters of selected permalloy. The simulation hysteresis loop is in high agreement with experimental data. Using permalloy as core of fluxgate probe, the simulation output is consistent with experimental output. The IBBO algorithm can identify the parameters of Jiles-Atherton model accurately, which provides a basis for the precise analysis and design of instruments and equipment with magnetic core.