Combustion instability has been widely reported in several combustion types; however, there is limited information on different fuel/air mixing distances in non-premixed combustion. Setting different distances between air tube and fuel tubes, the fuel/air mixing distances (δ) are changed by structural variations of nozzles. Keeping the heat load and equivalence ratios constant, the present work aims to examine the effects of fuel/air mixing distances on combustion instability in non-premixed combustion. Experimental observations suggest that combustion oscillations occur in non-premixed combustion with flame ignited outside the nozzle rather than other types of non-premixed combustion. Quasiperiodic oscillations, limit cycle modes, and intermittency modes are found in three fuel/air mixing distances in non-premixed combustion. The calculation methods of convection time for non-premixed combustion are established in the present work. The convection time of the limit cycle oscillations is then calculated, which is further found to trigger the second resonance modes of the combustion system. The further analysis reveals that varying fuel/air mixing distances can cause influences on local equivalence ratio distributions, and the convection time are correspondingly varied. The changes in convection time affects the coupling characteristics between heat release rate fluctuations and the acoustic modes in the combustion chamber. When the thermoacoustic coupling occurs, combustion instabilities appear. This work establishes a link between combustion instability and fuel/air mixing distances in non-premixed combustion and highlights the influences on spatial distributions of local equivalence ratios and then convection time, which can provide technical guidance for actual applications in various fuel/air mixing types.
Hydrogen is widely regarded as a promising carbon-free alternative fuel. However, the development of low-emission marine gas turbine combustion systems has been hindered by the associated risks of combustion instability, also termed as thermoacoustic oscillations. Although there is sufficient literature on hydrogen fuel and combustion instability, systematic reviews addressing the manifestations and mechanisms of these instabilities remain limited. The present study aims to provide a comprehensive review of combustion instabilities in hydrogen-enriched marine gas turbines, with a particular focus on elucidating the characteristics and underlying mechanisms. The review begins with a concise overview of recent progress in understanding the fundamental combustion properties of hydrogen, and then details various instability phenomena in hydrogen-enriched methane flames. The mechanisms by which hydrogen enrichment affects combustion instabilities are extensively discussed, particularly in relation to the feedback loop in thermoacoustic combustion systems. The paper concludes with a summary of the key combustion instability challenges associated with hydrogen addition to methane flames and offers prospects for future research. In summary, the review highlights the interaction between hydrogen-enriched methane flames and thermoacoustic phenomena, providing a foundation for the development of stable, low-emission combustion systems in industrial marine applications incorporating hydrogen enrichment.
To meet the requirements of achieving higher efficiency and lower NOx pollution, the flame temperature in gas turbine combustors increases continually; thus, the effusion-cooling technology has been used to ensure the combustor liner remains within the allowed temperature, by which the combustion characteristics and emission behavior are possibly influenced. In order to investigate the effects of dome cooling air flow on combustion characteristics and NOx emissions, three-dimensional combustion simulations for a swirl-stabilized can-type gas turbine combustor are carried out in this work by using the computational fluid dynamics (CFD) method. Through adjusting the ratio of the dome cooling air flow and the dilution cooling air flow, the characteristics of flow field, temperature distribution and NOx emissions under each work condition are analyzed. At different ratios of the dome-cooling air flow to the total air flow, the flow velocity field in the region near the center of the combustion chamber is not changed much, while the velocity field near the chamber wall shows a more significant difference. The temperature in the outer recirculation zone within the combustion chamber is effectively reduced as the dome cooling air flow increases. By analyzing the distribution characteristics of the concentration of OH*, it is demonstrated that the dome cooling air flow does not have a direct effect on the reaction of combustion. It is also found that as the ratio of the dome cooling air flow to the total air flow increases from 0 to 0.15, the value of the NOx emissions drops from 28.4 to 26.3 ppmv, about a 7.4% decrease. The distribution of the NOx generation rate in the combustion chamber does not vary significantly with the increasing dome cooling air flow. Furthermore, by calculating the residence time in different stages, when the the ratio of the dome cooling air flow to the total air flow varies from 0 to 0.15, the residence time in the pilot stage decreases obviously, from 42 ms to 18 ms. This means that reduction in residence time is the main factor in the decrease of NOx emissions when the dome cooling air flow increases.
29 March 2023 in Combustion Science and Technology
Internal flue gas recirculation (IFGR) is one of the most effective techniques for NOx reduction in boilers. Previous studies mainly focused on premixed combustion; however, the NOx formation principles in non-premixed methane/air flames are still unclear. This work aims to investigate the NOx formation mechanisms in non-premixed methane combustion at various IFGR rates. A series of three-dimensional computational fluid dynamics (CFD) simulations with detailed mechanisms was conducted. The results show that NOx is generated below 30 mg/m3 for IFGR rates higher than 17.7%, corresponding to the oxygen concentration in the oxidant mixture below 0.15. In high IFGR rates, the incompletely mixed oxidants and the presence of the central recirculation zones weakens the NOx reduction performance. Influenced by the decreased temperature by IFGR, the generation of thermal NOx is largely eliminated from 66 to 1 mg/m3. Prompt NOx contributes more than thermal NOx for the IFGR rates above 12.2%. The reaction range of thermal NOx is found moving upstream toward the nozzle with the axial distance of 0.1 m at most. IFGR gradually reduces prompt NOx but its spatial reaction ranges are hardly influenced. IFGR has no obvious effects both on the reaction rates and ranges on the minorities of the N2O and the NNH routes. This work connects the IFGR rates and the NOx formation pathways in non-premixed methane combustion, and highlights the importance of eliminating prompt NOx to achieve low-NOx combustion rather than sole NOx suppression method, which can provide foundation for designing low-NOx techniques.
24 November 2023 in Thermal Science and Engineering Progress