qingfeng wang

Prof. qingfeng wang

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 August 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
GKGexing Kong
Gexing Kong
XLXiangqiang Li
Xiangqiang Li
QWqingfeng wang
qingfeng wang
JZJianqiong Zhang
Jianqiong Zhang
A wideband high-power dual-branch helical reflectarray antenna (RAA) is presented. The reflecting element consists of two metal helical branches, and the variable rotation angles enable full 360° phase adjustment. An X-band RAA prototype with 9 × 9 rectangular grid is simulated and measured. Full-wave simulations show that the maximum gain of 23.7 dB is achieved with the beam focused at (θ=20°, φ=0°) direction at center frequency of 9.3 GHz and the 1-dB gain bandwidth is over 24.2%. The measured reflection coefficient is lower than -16.3 dB in the whole band. From 8.4 GHz to 10.8 GHz, the tested axial ratio is less than 2.3 dB. At center frequency, the tested gain is 23.4 dB and the corresponding aperture efficiency is 50.6%. The beam-scanning performance of the RAA is tested within 30° angular in two orthogonal planes with the scan loss of less than 1.5 dB and the axial ratios of lower than 1.4 dB. Taking the flat-topped beam as an example, the beam-forming capability of the RAA is verified. The measured results demonstrate the feasibility of the proposed design. The simulated results show that the power-handling capacity of the RAA is about 358 MW under vacuum condition.

17 May 2021 in IEEE Access
Verified
Journal Article
Open access
GKGexing Kong
Gexing Kong
XLXiangqiang Li
Xiangqiang Li
QWqingfeng wang
qingfeng wang
JZJianqiong Zhang
Jianqiong Zhang
The demand for multi-band high-power antennas, which have been rarely reported, becomes urgent in high-power microwave field. To meet the demand, a C/X dual-band high-power circularly polarized patch reflectarray antenna is proposed in this paper. Two main technologies are adopted to make the proposed antenna realize the high-power feature. Firstly, the elliptical patch with no abrupt structure is proposed to be the dual-band reflecting element to mitigate the electric field concentration. Secondly, the elliptical patches are proposed to be embedded into substrate to avoid the triple junction. The proposed dual-band reflecting element is designed by arranging two embedded elliptical patches with different sizes in a square lattice grid. The larger elliptical patch operates in C-band and the smaller one works in X-band. The elliptical patches are proposed to be rotated to realize continuous 360 ° phase response in both bands. By optimizing the thickness of substrate, the element spacing, and the size of the patches, the dual-band element shows good reflection amplitude and phase response and low mutual coupling performance. An antenna prototype with the aperture size of 345 mm ×345 mm is simulated and measured. The measured radiation results of the designed reflectarray antenna are in good agreement with simulations in both C-band and X-band. The measured gain of the antenna at 6.2 GHz is 24.6 dBi, and at 9.3 GHz is 27.8 dBi. Full-wave simulations show that the power capacity of the antenna at 6.2 GHz is about 10.2 MW, and at 9.3 GHz is about 3.9 MW in air condition. The low mutual coupling performance of the proposed antenna is verified both in element level and array level. All of the results show that the proposed antenna has the merits of high-power capacity, dual-band, and low mutual coupling.

3 April 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
XLXiangqiang Li
Xiangqiang Li
ZZZhe Zhou
Zhe Zhou
QWqingfeng wang
qingfeng wang
JZJianqiong Zhang
Jianqiong Zhang
A polarization conversion radome with embedded meander-line with high-power microwave applications potential is presented. This radome is sandwiched by three-layer dielectric and two-layer metal meander line. The metal meander line is used to achieve polarization conversion and the sandwich structure is used to avoid the contact between air and metal and then increase power handling capacity. After optimizing unit cell parameters, a polarization conversion radome with embedded meander-line is constructed and loaded on the radial line helical array antenna. The simulated and measured results show that the incident circular polarization wave (CPW) is converted to a transmitted linear polarization wave (LPW) well, the antenna system is matched well in different radiation directions. The simulated results show that the polarization conversion radome with embedded meander-line has great applications potential for high-power microwave field.

25 January 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
XTXianfeng Tang
Xianfeng Tang
XLXiangqiang Li
Xiangqiang Li
QWqingfeng wang
qingfeng wang
JZJianqiong Zhang
Jianqiong Zhang
XWXin Wang
Xin Wang
ZDZhaoyun Duan
Zhaoyun Duan
A coaxial coupler is proposed to develop a miniature metamaterial (MTM) backward wave oscillator (BWO). With respect to those using waveguide couplers as output structures, the MTM BWO adopting the coaxial coupler exhibits obvious miniaturized characteristics. For the MTM BWO, its high-frequency structure including the MTM slow wave structure (SWS) and the coaxial coupler has longitudinal length of $\sim 1.25\lambda $ . ( $\lambda $ is the free-space wavelength at the operating frequencies.) Importantly, the transverse size of $\sim \lambda $ /5 is only ~1/3 of those based on waveguide couplers. Furthermore, the transmission experiment is carried out. The experimental results show that the coaxial coupler with low loss property can effectively transform the TM-dominant mode in the MTM SWS to the TEM mode. The particle-in-cell simulations predict that the proposed MTM BWO yields MW-level peak output powers at frequencies from 2.85 to 2.903 GHz when the beam current is 30 A, and the beam voltage ranges from 65 to 110 kV. The simulation results confirm the feasibility of miniaturization as well as high output powers of the MTM BWO.

12 July 2023 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
XTXianfeng Tang
Xianfeng Tang
YZYuhan Zhang
Yuhan Zhang
SJShengkun Jiang
Shengkun Jiang
JZJianqiong Zhang
Jianqiong Zhang
LZLuqi Zhang
Luqi Zhang
ZDZhaoyun Duan
Zhaoyun Duan
A dual band metamaterial (MTM)-inspired backward wave oscillator (BWO) is developed by proposing a novel dual band coaxial coupler. The MTM-inspired BWO simultaneously exhibits dual band and miniaturization properties. The dual band property is confirmed by both transmission experiments and beam-wave interaction simulations. Meanwhile, the advantage of miniaturization results from the compact high frequency structure, i.e ., its transverse and longitudinal sizes are about two-third smaller and slightly shorter than the previous BWO with the waveguide coupler, respectively. Further, the particle-in-cell results predict that the MTM-inspired BWO yields peak output powers of 114-137 kW at ~2.833 GHz and of 100-144 kW at ~4.527 GHz, respectively. Importantly, the power difference at the two frequencies is confined to ~1 dB, which is much smaller than that of the previous one with the waveguide coupler. These results confirm the feasibility of the compact dual band BWO, which might be applied to target recognition and plasma diagnostics.

1 January 2020 in Progress In Electromagnetics Research Letters
Verified
Journal Article
Open access
PDF file
GKGexing Kong
Gexing Kong
XLXianqiang Li
Xianqiang Li
QWqingfeng wang
qingfeng wang
JZJianqiong Zhang
Jianqiong Zhang