The solid–solid phase transition, poor mechanical properties, and high sensitivity has impeded further practical applications of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane (HMX) based polymer bonded explosives (PBXs). To address these issues together, a facile and effective route was employed to achieve a coating of polydopamine (PDA) on the surface of explosive crystals via in situ polymerization of dopamine. Additionally, PBXs based on HMX@PDA microcapsules were prepared with a fluoropolymer as polymer binder. Improved storage modulus, static mechanical strength and toughness, and creep resistance has been achieved in as-prepared PDA modified PBXs. The β-δ phase transition temperature of as-obtained PBXs based on conventional HMX (C-HMX)@PDA was improved by 16.3 °C. The friction sensitivity of the C-HMX based PBXs showed a dramatic drop after the PDA coating. A favorable balance proposed in this paper among thermal stability, mechanical properties, and sensitivity was achieved for C-HMX based PBXs with the incorporation of PDA.
Polycrystalline Bi2O2Se/Ag nanocomposites were synthesized by spark plasma sintering process. Their thermoelectric properties were evaluated from 300 to 673 K. With the addition of silver, the conductive second phase Ag2Se and Ag can be observed, which results in a significant enhancement of electrical conductivity. The maximum conductivity is 691.8 S cm−1 for Bi2O2Se/20 vol.% Ag, which increased nearly 500 higher times than the pure Bi2O2Se bulk. ZT value can be enhanced greatly, ~0.07, for Bi2O2Se/5 vol.% Ag at 673 K, which is two times larger than the pure sample.