The share of global CO2 emissions deriving from the cement industry is about 5%. More than 50% of these are process-related and cannot be avoided. This paper addresses the application of CO2 capture technology to the cement industry. Analyses focusing on post-combustion technology for cement plants are carried out on the basis of detailed model calculations. Different heat supply variants for the regeneration of loaded wash solution were investigated. CO2 avoidance costs are in a range of 77 to 115 EUR/tCO2. The achievable CO2 avoidance rate for the investigated cases was determined to be 70% to 90%. CO2 reduction potentials were identified using CCS technology, focusing on the German cement industry as a case study. The results show that adopting carbon capture technology could lead to a significant reduction in CO2 emissions.
Synthetic Natural Gas (SNG) is the most researched option for a Power-to-Fuel pathway in Germany after hydrogen, having the advantage of being compatible with the existing infrastructure. However, it is not clear under which conditions SNG is economically and environmentally advantageous compared to natural gas usage, since this is determined by a complex interplay of many factors. This study analyzes the technical, economic and environmental aspects of a pilot SNG plant to determine the key parameters for profitable and sustainable operation. The SNG plant was simulated in Aspen Plus® with CO2 from biogas production as a feedstock and with hydrogen provided by a 1 MWel electrolyzer unit. A life cycle analysis (LCA) was undertaken considering several impact categories with a special focus on global warming potential (GWP). An SNG cost of 0.33–4.22 €/kWhth was calculated, depending on factors such as operational hours, electricity price and type of electrolyzer. It was found that the CO2 price has a negligible effect on the SNG cost, while the electricity is the main cost driver. This shows that significant cost reductions will be needed for SNG to be competitive with natural gas. For the investigated scenarios, a CO2 tax of at least 1442 €/t was determined, calling for more drastic measures. Considering the global warming potential, only an operation with an emission factor of electricity below 121 g CO2-eq/kWhel leads to a reduction in emissions. This demonstrates that unless renewable energies are implemented at a much higher rate than predicted, no sustainable SNG production before 2050 will be possible in Germany.
1 October 2021 in International Journal of Heat and Mass Transfer
The known sorbent deactivation over calcium looping cycles is one of the main drawbacks of this technology for CO2 capture. Steam is often discussed to improve carbonation and calcination reactions, and can be easily removed from the gas streams by condensation. Even though its benefits have been already reported on the literature, a comprehensive overview of the steam mechanisms on these reactions is still lacking. The aim of this work is to underline the effects of steam addition on the gas atmosphere properties, as heat transfer and CO2 partial pressure, as a catalyst, on the pore structure, and lastly, on CO2 diffusion. According to the literature review, we can conclude that steam effects positively the carbonation and calcination reactions in an optimal range. These findings can give a guideline for further calcium looping experimental investigation and open possibilities for sorbent improvement.