CoFePv with phosphorus vacancies (Pv) was prepared via Ar plasma-assisted phosphidation. CoFePv and its reconstructed CoFeOOH-PO43− serve as active species for the HER and the OER, demonstrating excellent catalytic performance and stability.
Heterostructure construction and heteroatom doping are powerful strategies for enhancing the electrolytic efficiency of electrocatalysts for overall water splitting. Herein, we present a P-doped MoS2/Ni3S2 electrocatalyst on nickel foam (NF) prepared using a one-step hydrothermal method. The optimized P[0.9mM]-MoS2/Ni3S2@NF exhibits a cluster nanoflower-like morphology, which promotes the synergistic electrocatalytic effect of the heterostructures with abundant active centers, resulting in high catalytic activity for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in alkaline electrolyte. The electrode exhibits low overpotentials and Tafel slopes for the HER and OER. In addition, the catalyst electrode used in a two-electrode system for overall water splitting requires an ultralow voltage of 1.42 V at 10 mA·cm−2 and shows no obvious increase in current within 35 h, indicating excellent stability. Therefore, the combination of P doping and the heterostructure suggests a novel path to formulate high-performance electrocatalysts for overall water splitting.
11 November 2015 in Industrial & Engineering Chemistry Research
In recent years, aqueous zinc ion batteries (ZIBs) have emerged as promising candidates for energy storage systems due to their inherent safety, environmental friendliness, and cost-effectiveness.
1 January 2012 in North American Journal of Medical Sciences
Background: Published data indicate that thyroid stimulating hormone receptor (TSHR) activities are associated with osteoporosis in some patients. Aim: This study aimed to elucidate whether a given polymorphism of the TSHR gene is associated with osteoporosis. Materials and Methods: One hundred and fifty subjects with osteoporosis were recruited in this study. The diagnosis of osteoporosis was performed with quantitative ultrasound system. The TSHR gene polymorphism was examined by polymerase chain reaction-restriction fragment length polymorphism. Results: The results showed a nucleotide substitution in the first position of codon 36 of the TSHR gene. The nucleotide substitution was from G to C, leading to a 36 D → 36 H change (D36H) in the predicted amino acid sequence of the receptor. The change did not show significance between healthy subjects and patients with osteoporosis (P > 0.05). On the other hand, we identified another single nucleotide polymorphism that is a C-to-G substitution at codon 727 (GAC to GAG); its frequency was significantly higher in patients with osteoporosis than that in healthy subjects. Using logistic regression analysis, significant correlation was revealed between the genotype D727E and the serum levels of TSH, or the quantitative ultrasound value of the calcaneal bone. Conclusions: The present study suggests that the genotype D727E of the TSHR, but not the genotype D36H, may be a genetic risk factor for osteoporosis.
The preparation of dense ZrB2-based ceramics typically requires high temperatures and long sintering time, which often results in significant grain coarsening and thus deteriorates the mechanical properties. Ultrafast sintering techniques offer a solution to inhibit grain coarsening by reducing processing time. However, the ultrafast preparation of dense ZrB2-based ceramics still remains a challenge. In this work, we successfully fabricated dense ZrB2-based ceramics in just a few minutes using heavy continuous DC Joule heating and pressing. Notably, the densification rate peaked at 1218 °C, and the densification process was nearly complete at a relatively low temperature of 1500 °C. The application of heavy continuous direct current not only promotes the densification of the ceramics but also enhances the texturization of ZrB2. This results in optimally aligned ZrB2 grains that form a three-dimensional bonded skeletal network. Such unique microstructures can effectively induce multi-stage fracture surfaces during failure, which helps the synergistic strengthening and toughening of the ceramics. The ceramics exhibit remarkable comprehensive mechanical properties, with flexural strength and fracture toughness reaching 773 ± 114 MPa and 5.88 ± 0.08 MPa·m1/2, respectively, surpassing those of conventional hot pressed samples. This technique is expected to be applied to other ultra-high temperature ceramics, providing a promising approach for development of thermal protection materials.