This work presents the analysis of the load motion during the interaction of wind pressure. The load was treated as a rigid body, and the rope system model as a non-deformed. The influence of effective area of wind pressure on load motion was considered. The theoretical model of load motion was presented, which may be an universal approach for transporting machines equipped with a rope-lifting system. To define the orientation of the movable Cartesian coordinate system related to the load, Bryant angles were used. An algorithm and computational program were developed to allow for analysis of dynamic phenomena. The initial problem was solved with the use of the ode45 calculation procedure in the Matlab software on the basis of the Runge–Kutta 4th Order Method. The obtained results were verified with the experimental ones achieved in the wind tunnel and Tracker program. Numerical calculations using commercial software SolidWorks were also presented. In the experiment, the spatial motion of the load was analysed. Experimental tests were carried out for gust of wind and constant temperature and humidity. In addition, the paper presents the application of the proposed method for a load carried by a rotary crane. After taking into account the control functions resulting from the nature of the work of any machine, the formulated model can be a full description of the carried load motion taking into account external forces.

This paper considers the coupled kinematic and dynamic models of a mobile crane. A full description of boom and load movement has been provided as a response of the system to the influence of kinematic forces. The linear system model was treated as rigid, and the carried load as a nondeformed static body. To describe the position of said load, Bryant angles were used. The dynamic model includes the impact of external forces (wind pressure) while load carrying and positioning. Algorithm and calculation software were developed to enable dynamic phenomena analysis during both a work cycle and free movement of said load. The initial problem was solved by means of the ode45 calculation procedure in the Matlab software based on the Runge–Kutta 4th Order Method. The work presents exemplary results of load movement simulation with respect to various wind velocities, selected on the basis of guidelines from Poland’s standards regarding safe operation of mechanical equipment.

The paper presents wind turbine simulation tests using SolidWorks software. The geometrical model of the HAWT wind turbine was developed based on a real object. It consisted of three selected parts: shell, bearing girders and stiffening ribs. The wing profile of the analyzed object was modelled using NREL’s and NACA airfoils. A numerical analysis was carried out to determine the strength of the tested structure under specific wind speed. Stresses were calculated according to the Huber-Mises hypothesis.

Bells as percussion instruments have been known to humanity for ages. The casting process, the shape and the materials have changed over the years. The functional properties of bells depend on the casting quality and the generated sound. The casting quality is related to the shape, material and technology. The acoustic quality must fulfill specific parameters. This work concerns the assessment of the quality of the manufactured bells and the possibility of replacing tin bronze with a material with similar mechanical properties. Therefore, bell bronze—which is dedicated to this type of work—and aluminum bronze—which is characterized by high strength and hardness, have been applied to casting. The laser scanning technique was used to assess the quality of castings. Based on a point cloud, an optimized mesh was generated from which the 3D model was finally created. On the basis of the CAD model, the defects resulting from the casting process were determined in the form of graphical comparison. The correctness of the selected foundry shrinkage of the selected material was also determined. The manufactured bells were also assessed for sound quality. Vibration frequencies were determined using a vibration analyzer and free software Wavanal. The experimental results were compared with the ones obtained from the numerical frequency analysis. With the help of tests, the quality of the bells was assessed, and it was determined whether aluminum bronze meets the acoustic criteria. The presented method can be used in the development of bell templates. These templates will allow the bell to obtain the correct shape and acoustic quality without the need for a tuning process.