Nji Raden Poespawati

Nji Raden Poespawati


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2019 in Photonics
Verified
Journal Article
Open access
PDF file
RPRetno Wigajatri Purnamaningsih
Retno Wigajatri Purnamaningsih
NPNji Raden Poespawati
Nji Raden Poespawati
Tomy AbuzairiTomy Abuzairi
Tomy Abuzairi
EL DOGHECHEEL DOGHECHE
EL DOGHECHE
This paper details the design of a 1 × 8 optical power divider, using a gallium nitride (GaN) semiconductor on sapphire, which can be applied to underwater optical wireless communication. The design consists of nine parallel rectangular waveguides which are based on mode coupling phenomena. Analysis of the design was performed using the beam propagation method (BPM). The optimization was conducted using the 3D finite difference (FD)-BPM method with an optical signal input at the wavelength required for maritime application of λ = 0.45 µm. The signal was injected into the central waveguide. The results showed that at a propagation length of 1480 µm the optical power is divided into eight output beams with an excess loss of 0.46 dB and imbalance of 0.51 dB. The proposed design can be further developed and applied in future underwater communication technology.

13 October 2020 in International Journal of Photoenergy
Verified
Journal Article
Open access
NPNji Raden Poespawati
Nji Raden Poespawati
JSJunivan Sulistianto
Junivan Sulistianto
Tomy AbuzairiTomy Abuzairi
Tomy Abuzairi
RPRetno Wigajatri Purnamaningsih
Retno Wigajatri Purnamaningsih
Performance and Stability Comparison of Low-Cost Mixed Halide Perovskite Solar Cells: CH3NH3PbI3-Cl and CH3NH3PbI3-SCN: Perovskite solar cell is categorized as a third-generation solar cell which is used for its high-performance and low-cost production. However, device stability is a major problem in the development of perovskite solar cells. Mixed halide perovskite is one of the subjects that have been proposed to improve perovskite solar cell stability. Research about solar cells using mixed halide perovskite is widely reported. However, complex configurations and fabrication using sophisticated equipment were usually used in those reported studies. In this work, the fabrication of solar cells using mixed halide perovskite CH3NH3PbI3-Cl and CH3NH3PbI3-SCN was conducted using a simple and low-cost structure. Solution-processed deposition fabrication method using spin coating was used to fabricate the devices. Optimization of the spin coating rate for each layer in the perovskite solar cells was performed to ensure that the devices exhibited decent performance. Stability measurement and analysis of the perovskite solar cells were conducted. Summarily, solar cells with mixed halide perovskite CH3NH3PbI3-Cl exhibit the highest performance with an efficiency of 2.92%. On the other hand, solar cell with mixed halide perovskite CH3NH3PbI3-SCN has the best stability which only drops its efficiency by 39% from its initial value after 13 days.

1 January 2024 in International Journal of Photoenergy
Verified
Journal Article
Open access
JSJunivan Sulistianto
Junivan Sulistianto
AKAkinori Konno
Akinori Konno
TATomy Abuzairi
Tomy Abuzairi
NPNji Raden Poespawati
Nji Raden Poespawati
Carbon‐based perovskite solar cells (PSCs) have the advantages of a long lifetime and are compatible with highly scalable manufacturing processes. The use of carbon electrodes and the absence of a hole selective layer (HSL) promote a simplified fabrication process. However, the efficiency of HSL‐free carbon‐based PSCs is inferior to PSCs that utilize metal electrodes and HSL due to poor hole extraction at the perovskite/carbon interface. To overcome those issues, researchers added an interlayer on the perovskite/carbon interface or incorporated additive material into the carbon layer. However, there is limited research on utilizing both strategies to improve carbon‐based PSC performance. Here, we use CuSCN as an interlayer between the perovskite/carbon interface and a carbon additive in carbon‐based PSCs. By utilizing both strategies, the charge transfer of carbon‐based PSC was significantly improved compared to carbon‐based PSC utilizing only one improvement strategy. Confirmed by photoluminescence (PL) and electrochemical impedance spectroscopy (EIS) characterizations, the CuSCN interlayer and CuSCN‐incorporated carbon electrode enable more efficient hole transfer, resulting in an increased power conversion efficiency from 0.58% to 5.06%. The proposed PSC structure shows promising results for further improving carbon‐based PSC performance.

26 November 2018
Verified
Conference Paper
Open access
IDIstighfari Dzikri
Istighfari Dzikri
MHMichael Hariadi
Michael Hariadi
RPRetno Wigajatri Purnamaningsih
Retno Wigajatri Purnamaningsih
NPNji Raden Poespawati
Nji Raden Poespawati
Research in solar cells is needed to maximize Indonesia’s vast solar potential that can reach up to 207.898 MW with an average radiation of 4.8 kWh/m2/day. Organometallic perovskite solar cells (PSCs) have gained immense attention due to their rapid increase in efficiency and compatibility with low-cost fabrication methods. Understanding the role of hole transport layer is very important to obtain highly efficient PSCs. In this work, we studied the effect of Hole Transport Layer (HTL) to the performance of perovskite solar cell. The devices with HTL exhibit substantial increase in power conversion efficiency, open circuit voltage and short circuit current compared to the device without HTL. The best performing device is PSC with CuSCN as HTL layer, namely Voc of 0.24, Isc of 1.79 mA, 0.27 FF and efficiency of 0.09%.

1 April 2019 in Journal of Physics: Conference Series
Verified
Conference Paper
Open access
PDF file
JSJ Sulistianto
J Sulistianto
RPR W Purnamaningsih
R W Purnamaningsih
NPNji Raden Poespawati
Nji Raden Poespawati
Organometal lead halide has gained immense popularity as solar cell active layer due to their unique optical characteristic, low cost, and simple fabrication technique. Transport layer is important component to maximize overall performance of perovskite solar cell. Inorganic CuSCN have good transparency and high hole mobility as p-type transport layer for perovskite solar cell. In this work, we investigated the effect of rotational speed on spin coating to grow CuSCN thin film. Rotational speed is ranging from 1000 rpm to 4000 rpm. The best performing devices is when CuSCN layer deposited at 2000 rpm with VOC 0.96 V, ISC 5.29 mA, and FF 0.48.

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
ADArika Dhia
Arika Dhia
KDKresna Devara
Kresna Devara
Tomy AbuzairiTomy Abuzairi
Tomy Abuzairi
NPNji Raden Poespawati
Nji Raden Poespawati
RPRetno Wigajatri Purnamaningsih
Retno Wigajatri Purnamaningsih
This paper reports the design of respiratory sensor using fiber optic for newborn incubator application. The sensor works based on light intensity losses difference obtained due to thorax movement during respiration. The output of the sensor launched to support electronic circuits to be processed in Arduino Uno microcontroler such that the real-time respiratory rate (breath per minute) can be presented on LCD. Experiment results using thorax expansion of newborn simulator show that the system is able to measure respiratory rate from 10 up to 130 breaths per minute with 0.595% error and 0.2% hysteresis error.