The mechanism and capacity of adsorption of cadmium (Cd) on orange peel (OP)-derived biochar at various pyrolysis temperatures (400, 500, 600, 700 and 800°C) and heating times (2 and 6 h) were investigated. Biochar was characterized using proximate analysis, point of zero charge (PZC) analysis, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction. Equilibrium and kinetic experiments of Cd adsorption on biochar were performed. The results indicated that the pH value at PZC of biochar approached 9.5. Equilibrium can be reached rapidly (within 1 min) in kinetic experiments and a removal rate of 80.6–96.9% can be generated. The results fitted the pseudo-second-order model closely. The adsorption capacity was estimated using the Langmuir model. The adsorption capacity of Cd on biochar was independent of the pyrolysis temperature and heating time ( p>0.01). The maximum adsorption capacity of Cd was 114.69 (mg g⁻¹). The adsorption of Cd on biochar was regarded as chemisorption. The primary adsorption mechanisms were regarded as Cπ–cation interactions and surface precipitation. Cadmium can react with calcite to form the precipitation of (Ca,Cd)CO₃ on the surface of biochar. The OP-derived biochar can be considered a favourable alternative and a new green adsorbent for removing Cd²⁺ ions from an aqueous solution.

This study investigated the phenomenon and mechanism of adsorption of methylene green 5 (MG5) on three pristine biosorbents: golden shower pod (GS), coconut shell (CC), and orange peel (OP). The results showed that the biosorbents possessed low specific surface areas, but abundant functional groups. Adsorption was strongly affected by the solution’s pH and ionic strength. As revealed in the kinetic study, equilibrium was rapidly established, requiring low activation energies; a removal rate of 30%–87% was achieved within 1 min. The maximum Langmuir adsorption capacities at 30°C exhibited the following order: GS (106 mg/g) > OP (92 mg/g) > CC (59 mg/g). Thermodynamic experiments suggested that the adsorption occurred spontaneously (−ΔG°) and exothermically (−ΔH°). The primary adsorption mechanisms involved electrostatic attraction, hydrogen bonding formations, and n-π interaction. Thermogravimetric analysis (TGA) revealed that three biopolymer components (i.e., hemicellulose, cellulose, and lignin) played controlling roles in the adsorption process. Thus, these three agricultural residues can be considered potential low-cost adsorbents for efficient dye adsorption applications.