The influence of far‐field stresses on fracture apertures in a fragmented rock layer is investigated using finite element analysis of a three‐dimensional mechanical model. The model implements realistic boundary conditions, interactions between the fragmented layer and neighboring plastic rock layers, and frictional interfaces between the rock blocks. Stress‐strain analysis is conducted to obtain stress variations within the fragmented rock layer and the block displacements and rotations. The fracture apertures are calculated using the local stress states instead of the far‐field stresses simply being projected on the fractures. It is observed that fracture apertures can vary for the fracture segments over the individual blocks. Ensemble permeability is calculated by running a single‐phase flow analysis considering the obtained fracture apertures for fracture segments. The influence of the rock block displacements, rotations and deformations, difference between the mechanical properties of the rock layers, and the orientation of the horizontal stresses is investigated on the ensemble permeability. It is demonstrated that the compressibility of the neighboring layers and block rotations and deformations have significant influence on the permeability of the fragmented rock layer. These effects, which may be ignored in simpler aperture calculation models, can result in considerable inaccuracies in the estimation of fracture apertures and ensemble permeability. Hence, such methods may only be used as indicative tools.
1 August 2013 in Journal of Petroleum Science and Engineering
Polymer-surfactant flooding is one of the most novel chemical enhanced oil recovery methods. Application of Nano particles in enhanced oil recovery has attracted much interest as well. This work concerns the application of Nano particles to increase the efficiency of polymer-surfactant flooding in heavy oil five-spot systems. In this investigation, micromodel setup was used to monitor the role of Nano particles on wettability alteration during polymer-surfactant floods. Two common Nano particles, SiO2 and TiO2 as well as HPAM and SDS as commercial chemicals in enhanced oil recovery, were used to create five solutions containing Nano particles at different levels of concentration. Then, contact angle tests and flooding tests were performed by taking microscopic/macroscopic pictures. According to the results, since SiO2 Nano particle decrease the contact angle more severely, it results in a higher oil recovery. Although this decrease is more when SiO2 is dispersed in water, due to its better absorption on a surface, the wettability alteration is more obvious during polymer-surfactant flooding because of the presence of a thinner oily film that intensifies mass transformation from fluid to the surface. In addition, an increase in the concentration of Nano particles leads to an increase in the efficiency of oil recovery and wettability alteration. Furthermore, according to the microscopic pictures, pulling and emulsification mechanisms are more effective than the wettability alteration mechanism.