21 March 2015 in Materials and Structures
1 February 2016 in Journal of Structural Engineering
In this paper, the tensile behavior of groups of Ajax anchored blind bolts used within concrete-filled steel square hollow sections is investigated. Using Ajax anchored blind bolts moment-resisting bolted connections to concrete-filled steel hollow section columns will be possible. Extensive experimental and numerical studies were undertaken. Bolt sizes and section sizes suitable for medium-rise commercial buildings were used. It was concluded that the groups of Ajax anchored blind bolts can reach the ultimate capacity of equivalent groups of standard structural bolts. The location of an Ajax anchored blind bolt relative to the section side walls has a significant influence on its behavior. For bolts located close to the side walls of a section, concrete struts developed and transferred the loads to the corner of the sections. Bolt diameter, concrete grade, and strut angle were found to be the most influential factors in the stiffness of an Ajax anchored blind bolt. A simple theoretical model, based on finite-element (FE) parametric studies, was developed to estimate the tensile behavior of groups of Ajax anchored blind bolts. This was essential for the application of Ajax anchored blind bolts in building construction practice.
22 May 2018 in Journal of Geophysical Research: Solid Earth
The influence of far‐field stresses on fracture apertures in a fragmented rock layer is investigated using finite element analysis of a three‐dimensional mechanical model. The model implements realistic boundary conditions, interactions between the fragmented layer and neighboring plastic rock layers, and frictional interfaces between the rock blocks. Stress‐strain analysis is conducted to obtain stress variations within the fragmented rock layer and the block displacements and rotations. The fracture apertures are calculated using the local stress states instead of the far‐field stresses simply being projected on the fractures. It is observed that fracture apertures can vary for the fracture segments over the individual blocks. Ensemble permeability is calculated by running a single‐phase flow analysis considering the obtained fracture apertures for fracture segments. The influence of the rock block displacements, rotations and deformations, difference between the mechanical properties of the rock layers, and the orientation of the horizontal stresses is investigated on the ensemble permeability. It is demonstrated that the compressibility of the neighboring layers and block rotations and deformations have significant influence on the permeability of the fragmented rock layer. These effects, which may be ignored in simpler aperture calculation models, can result in considerable inaccuracies in the estimation of fracture apertures and ensemble permeability. Hence, such methods may only be used as indicative tools.
1 April 2019 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
8 July 2017 in Geomechanics and Geophysics for Geo-Energy and Geo-Resources
1 April 2009 in American Journal of Applied Sciences
Reliability-Based Earthquake Design of Jacket-Type Offshore Platforms Considering Pile-Soil-Structure Interaction