Laser absorption spectroscopy (LAS) is a promising diagnostic method capable of providing high-bandwidth, species-specific sensing, and highly quantitative measurements. This review aims at providing general guidelines from the perspective of LAS sensor system design for realizing quantitative species diagnostics in combustion-related environments. A brief overview of representative detection limits and bandwidths achieved in different measurement scenarios is first provided to understand measurement needs and identify design targets. Different measurement schemes including direct absorption spectroscopy (DAS), wavelength modulation spectroscopy (WMS), and their variations are discussed and compared in terms of advantages and limitations. Based on the analysis of the major sources of noise including electronic, optical, and environmental noises, strategies of noise reduction and design optimization are categorized and compared. This addresses various means of laser control parameter optimization and data processing algorithms such as baseline extraction, in situ laser characterization, and wavelet analysis. There is still a large gap between the current sensor capabilities and the demands of combustion and engine diagnostic research. This calls for a profound understanding of the underlying fundamentals of a LAS sensing system in terms of optics, spectroscopy, and signal processing.
Most existing audio-visual speech enhancement (AVSE) methods work well in conditions with strong noise, however when applied to conditions with a medium SNR, serious performance degradations are often observed. These degradations can be partly attributed to the feature-fusion(early fusion etc.) architecture that tightly couples the audio information that is very strong and the visual information that is relatively weak. In this paper, we present a safe AVSE approach that can make the visual stream contribute to audio speech enhancment(ASE) safely in conditions of various SNRs by late fusion.The key novelty is two-fold: Firstly, we define power binary masks (PBMs) as a rough representation of speech signals. This rough representation admits the weakness of the visual information and so can be easily predicted from the visual stream. Secondly, we design a posterior augmentation architecture that integrate the visual-derived PBMs to the audio-derived masks via a gating network. By this architecture, the entire performance is lower-bounded by the audio-based component. Our experiments on the Grid dataset demonstrated that this new approach consistently outperforms the audio-based system in all noise conditions, confirming that it is a safe way to incorporate visual knowledge in speech enhancement.
12 June 2023 in Journal of Colloid and Interface Science
A baseline reduction algorithm for determining gas temperature and concentration from absorption spectra with interfering features using direct absorption spectroscopy is proposed. Empirical baselines are obtained through non-absorbing baseline transform, and background subtraction is done by reducing the first three components of the orthogonal polynomial expansion of the measured spectra. The algorithm is first validated by numerical simulation using the absorption lines of CO ( R (9) and R (17)) located between 2179 and 2180 cm −1 , which provides a correct estimation of temperature and CO concentration. Then the method is demonstrated in premixed CH 4 /air flat flame. The temperature is determined with a precision of 20 K, and the detection limit for CO is 400 ppm at 1835 K with 4.70% CO and 4.70% CO 2 interference. Both the simulation and experimental results show that the algorithm is well suited for interpreting absorption spectra with neighbouring interference features as are often encountered in practical combustion environments.
In this Letter, we systematically investigate the Leidenfrost temperature for hot solid substrates with various thermal diffusivities and surface roughnesses. Based on the experimental results, we build a phenomenological model that considers the thermal diffusivity of a solid substrate and derive a relationship between the surface roughness and the resulting vapor film thickness. The generality of this model is supported by experimental data for different liquids and solid substrates. Our model thus allows for a theoretical prediction of the Leidenfrost temperature and develops a comprehensive understanding of the Leidenfrost effect.