Tunable terahertz (THz) functional devices have exhibited superior performances due to the use of active materials, such as liquid crystals, graphene, and semiconductors. However, the tunable range of constitutive parameters of materials is still limited, which leads to the low modulation depth of THz devices. Here, we demonstrate a broadband tunable THz absorber based on hybrid vanadium dioxide (VO2) metamaterials. Unlike other phase change materials, VO2 exhibits an insulator-to-metal transition characteristic and the conductivity can be increased by 4–5 orders of magnitude under external stimulus including electric fields, optical, and thermal pumps. Based on the unique transition character of VO2, the maximum tunable range of the proposed absorber can be realized from 5% to 100% by an external thermal excitation. Meanwhile, an absorption greater than 80% in a continuous range with a bandwidth about 2.0 THz can be obtained when VO2 is in its metal phase at high temperature. Furthermore, the absorber is insensitive to the incident angle up to 50° and such a broadband THz absorber can be used in applications including imaging, modulating, cloaking, and so on.
Monoclinic gallium oxide (β-Ga2O3) is a super-wide bandgap semiconductor with excellent chemical and thermal stability, which is an ideal candidate for detecting deep ultraviolet (DUV) radiation (wavelength from 200 nm to 280 nm).
Ternary oxide Zn2GeO4 with a wide bandgap of 4.84 eV, as a candidate for fourth generation semiconductors, has attracted lots of attention for deep UV photodetector applications, as it is blind to the UV-A/B band and only responds to the UV-C band.
A diode-pumped Yb-doped double-clad fiber laser operating in a Q-switched regime is described. By exploiting pulsed pump light and stimulated Brillouin scattering of the gain fiber, a peak power of 105 kW has been demonstrated, which is an order of magnitude greater than that of conventional Q-switched fiber devices. Pulse energy of 0.5 mJ and pulse duration of 5 ns have been achieved.
14 December 2021 in Journal of Lightwave Technology
An optical fiber humidity sensor with a microfiber knot resonator (MKR) nested U-shaped Mach-Zehnder (MZ) interferometer based on the Vernier effect is proposed. While the reference arm is protected by cured ultraviolet glue, the sensing arm is coated by agarose. The Vernier effect is realized by superimposing the comb-like transmission spectra of the MKR and MZ interfernce, which are designed to have slightly different free spectral ranges. Experimental results indicate that the proposed sensor can provide a maximum humidity sensitivity of 2.442 nm/%RH with a measurement range from 60% RH to 95% RH. The sensor temperature response, reversibility and repeatability are also investigated. The response time is found to be 102 ms for a change of ∼30% RH. This sensor not only retains key features and merits of the MKR, including low cost and small footprint, but also has a simpler preparation process compared with conventional sensors based on the Vernier effect.