Cooking sector is considered as one of the major energy consuming sector in developing and underdeveloped countries. From the primitive age, humankind largely rely on biomass for their cooking energy need, even though there has been a tremendous upgradation in cooking methods. Due to hazardous effects and energy inefficiencies of conventional biomass cooking system, unconventional cooking energy (method) is becoming popular day by day. Dependency on ever depleting fossil fuel has forced us to switchover to renewable energy options and amongst all; solar energy seems best option due to its inherent reasons. In this study, efforts have been made to review the entire solar cooking systems incorporating with and without thermal energy storage available hitherto. The study reveals the different thermal performance parameters of solar cooking system and attempts to highlight the adaption factors of solar cooking system in the designated market.
19 February 2019 in Journal of Solar Energy Engineering
This work aims at providing insight into developmental and operational experience of an innovative milk cooler which uses solar thermal energy for cooling of fresh milk by way of vapor absorption refrigeration system (VARS). The system uses CPC solar collector(s) producing medium temperature that is desired to provide required thermal energy to the generator of VARS. However, mismatch between the time of availability of solar energy and cooling period of milk raises a demand of integrating thermal storage to this system for use of thermal energy at appropriate times. The novelty of this work is the development of experimental setup and its operation as innovative design to meet the requirement and possible model for the industry to operate and grow using the suggested system. The design, while addressing the problem of grass root level people for generation of income, also helps in reducing the carbon footprint of milk industry, and in the world environment as a whole.
This study focuses on optimizing the selective catalytic reduction (SCR) system to reduce urea deposits and enhance overall system performance. Both computational fluid dynamics (CFD) simulations and experimental analyses were conducted to evaluate an S-bend inlet SCR design and an improved configuration featuring multiple mixer setups. The enhanced design demonstrated superior performance, with the flap mixer reducing the accretion rate to 3.6 × 10⁻⁴ kg/m²s, representing a 60.9% reduction in urea deposition at an injection rate of 41.9 mg/s under acceleration conditions, compared to the no-mixer SCR setup. Furthermore, the thickness of the urea deposit was substantially reduced, with experimental measurements showing a decrease from 5.6 × 10⁻⁴ microns (no-mixer SCR setup) to 2.6 × 10⁻³ microns (flap mixer), marking a 53.6% reduction. The experimental and CFD results exhibited strong agreement, with deviations of 8% for the accretion rate and 7–9% for urea deposit thickness, reinforcing the reliability of the simulation model. The close alignment between experimental and numerical findings highlights the effectiveness of the optimized mixer in promoting uniform droplet breakup and reducing localized deposition. The implementation of optimized mixer geometries improved overall system performance, facilitated compliance with stringent emission regulations, and mitigated operational complexities related to urea accumulation. This study supports the ability of current SCR systems to meet future NOx emission limitations at reduced cost.
In this study, a numerical investigation is conducted to compare the impact of various ribs such as transverse, inclined, V-shaped and arc-shaped fixed on the absorber plate of a solar air heater under consistent boundary conditions. The analysis considers Reynolds numbers ranging from 3000 to 15000 and a heat flux corresponding to 1000 W m−2. Various geometric characteristics of the ribs, including relative roughness height, relative pitch, number of gaps, rib-arm angle (attack angle), and relative gap width, are kept constant throughout the investigation in this comparative analysis. The simulations are carried out using ANSYS-Fluent software, and the theoretical results are employed for validation. Results indicate that at Reynolds number 15,000, the maximum Thermal-Hydraulic Performance Parameter (THPP) for V-shaped ribs is 2.15 followed by arc-shaped ribs as 1.6.