Fractures, vugs, and pores constitute the main pore space in carbonate reservoirs. The associated pore structure—which is of key importance in terms of hydrocarbon production and fluid flow—varies with effective stress. However, there is a serious lack of data with regard to how precisely the pore morphology changes as a function of effective stress; we thus carried out in situ loading‐unloading experiments (up to 20 MPa effective stress) where two carbonate samples (fractured and vuggy) were examined with X‐ray computed tomography at high resolution in 3‐D. The results showed that after loading, porosity decreased exponentially, followed by an increase during unloading where it did not recover to its initial value. This was mainly because of the stress effect on large pore space (i.e., fractures and vugs). For fractured carbonate, the unrecovered porosity can be linked to similar reduction of the surface area and the average aperture of the fracture. Clearly, the changes in pore morphology were more significant in the fractured carbonate (including extension, connection, and disconnection of fractures) during both loading and unloading, while the vuggy carbonate experienced irreversible structural damage. The vuggy carbonate has bigger porosity variation than fractured carbonate to the mechanical loading‐unloading cycle. This work thus demonstrates how carbonate pore morphology changes with depth (higher effective stresses are encountered deeper in the reservoir) or during production (with hydrocarbon depletion the effective stress increases).
8 October 2019 in Journal of Geophysics and Engineering
For magnetotelluric (MT) data with a large coverage, inversion interpretation for the whole area is usually impossible, due to the physical limitation of a computer. However, for each MT station, it is only sensitive to a region (called MT footprint) localized immediately underneath the station, much smaller than the whole survey area. Thus the whole large survey area can be subdivided into many sub-areas and inverted using the moving footprint technique efficiently. Therefore, to understand the MT footprint is of great importance for developing such an inversion algorithm. In this paper, we study the influence of frequency, resistivity and existence of anomalous structure in the MT footprint. We first use the finite difference method to evaluate the total electromagnetic (EM) fields, then apply the numerical volume integration of tensor green's function to calculate the total induced fields at the receiver (summation of the contribution for each cell). The footprint is obtained based on the contribution of each cell to the total induced fields. Different models are designed to understand the footprint for MT problems. An increase in frequency or conductivity results in a decrease in the size of footprint. Existence of anomalous bodies within the footprint affects the MT footprint size to a degree, dependent on the overall resistivity. Outside the footprint, the existence of anomalous bodies have little effect on the footprint size and shape.
Purpose: Thermal conduction anisotropy, which is defined by the dependency of thermal conductivity on direction, is an important parameter in many engineering and research studies such as the design of nuclear waste depositional sites. In this context, the authors aim to investigate the effect of grain shape in thermal conduction anisotropy using pore scale modeling that utilizes real shapes of grains, pores and throats to characterize petrophysical properties of a porous medium. Design/methodology/approach: The authors generalize the swelling circle approach to generate porous media composed of randomly arranged but regularly oriented elliptical grains at various grain ratios and porosities. Unlike previous studies that use fitting parameters to capture the effect of grain–grain thermal contact resistance, the authors apply roughness to grains’ surface. The authors utilize Lattice Boltzmann method to solve steady state heat conduction through medium. Findings: Based on the results, when the temperature field is not parallel to either major or minor axes of grains, the overall heat flux vector makes a “deviation angle” with the temperature field. Deviation angle increases by augmenting the ratio of thermal conductivities of solid to fluid and the aspect ratios of grains. In addition, the authors show that porosity and surface roughness can considerably change the anisotropic properties of a porous medium whose grains are elliptical in shape. Originality/value: The authors developed an algorithm for generation of non-circular-based porous medium with a novel approach to include grain surface roughness. In previous studies, the effect of grain contacts has been simulated using fitting parameters, whereas in this work, the authors impose the roughness based on the its fractal geometry.
Group velocity is an important characteristic of surface wave that is defined as the velocity of an envelope of frequencies. Although many studies have shown the promises of analyzing the group velocity to obtain subsurface S-wave velocity, the estimation of the group velocity is not straightforward due to the uncertainties of selecting an optimum envelope of frequencies. Conventional transformations or filtering algorithms used to define an optimum envelope usually give reasonable results just for a narrow frequency or velocity range. We introduced a new approach for the estimation of the group velocity using the sparse S transform (SST) and sparse linear Radon transform (SLRT). In SST, the width of the Gaussian window is optimally calculated by energy concentration to eliminate energy smearing in the time-frequency (TF) domain, and then the sparsity is applied to enhance the TF resolution. Compared with conventional methods for the estimation of the group velocity based on the generalized S transforms, SST does not require any adjustment to the Gaussian window and yields accurate estimates of the group velocity. We apply SST to each seismic trace of a seismic shot record to obtain a 3D cube of frequency, time, and offset. For any frequency, we obtain a common frequency gather of time and offset to which we apply SLRT to obtain the group velocity of the surface wave. Our approach is robust at calculating high-resolution distinguishable dispersion curves of the group velocity in particular when data are extremely sparse.
Effective thermal conductivity (ETC), as a necessary parameter in the thermal properties of rock, is affected by the pore structure and the thermal conduction conditions. To evaluate the effect of fractures and saturated fluids on sandstone’s thermal conductivity, we simulated thermal conduction along three orthogonal (X, Y, and Z) directions under air- and water-saturated conditions on reconstructed digital rocks with different fractures. The results show that the temperature distribution is separated by the fracture. The significant difference between the thermal conductivities of solid and fluid is the primary factor influencing the temperature distribution, and the thermal conduction mainly depends on the solid phase. A nonlinear reduction of ETC is observed with increasing fracture length and angle. Only when the values of the fracture length and angle are large, a negative effect of fracture aperture on the ETC is apparent. Based on the partial least squares (PLS) regression method, the fluid thermal conductivity shows the greatest positive influence on the ETC value. The fracture length and angle are two other factors significantly influencing the ETC, while the impact of fracture aperture may be ignored. We obtained a predictive equation of ETC which considers the related parameters of digital rocks, including the fracture length, fracture aperture, angle between the fracture and the heat flux direction, porosity, and the thermal conductivity of saturated fluid.